Corksport Top Mount Intercooler - MS3/6

$493.00 USD
SKU GEN-6-930-100
Buy now pay later,no extra cost!

Payments from $49.30 with

Add to Wishlist

Corksport Top Mount Intercooler – MS3/6

Corksport Top Mount Intercooler - MS3/6

The CorkSport Top Mount Intercooler (TMIC) provides solid power gains and a great value to the Mazdaspeed 3, MS6 and CX7 turbo. Made from CorkSport’s own custom cast end tanks which are TIG welded to a 3.0” thick bar and plate core, the TMIC provides added performance by removing the bottleneck restriction of the stock intercooler and increasing resistance to heat soak by using thicker materials. The cold pipe connection is CNC milled and drilled for a leak proof connection and all bolt holes have been capped off.

Better Cooling: 16 Rows of Cooling Fins help drastically lower post turbo air temperatures. Proven on a SuperFlow test bench to provide 46% more airflow over the stock intercooler.

More Capacity: With 3.0" of thickness, the extra capacity allows significant cooling capabilities. During testing, the Mazdaspeed 3 TMIC showed an average decrease in pressure across the core by 53% and an increase in overall efficiency of 25% over the stock intercooler.

Cast Aluminium: End tanks made of cast aluminium are durable and long lasting. Plus with a bar and plate intercooler core, you remove bottlenecking for more power with less boost.

The CorkSport Advantage
Optional Aluminium Shroud For maximum performance and airflow, or maintain your factory engine shroud to keep a stealth look.
Reduces pre-detonation (knock) of the fuel air charge
Increased resistance to heat soak thanks to larger capacity and better airflow
Fits the 2007-2009 Mazdaspeed 3, 2006-2007 Mazdaspeed 6, 2010+ Mazdaspeed 3, and Cx7
Choose from custom finishing options Rolled Finish for a Gloss look, or Sand Blasted for a Rough Matte finish.
Corksport Service and Support Receive full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support

*Please note due to the design of the factory hood scoop on the 2010+ Mazdaspeed 3 the hood scoop seal will rest on the rear intercooler end tank with the optional aluminium shroud.

**Stock shroud molding may cause some fins to bend slightly. This will NOT affect the performance or efficiency of your TMIC. The easiest and recommended way of removing the offending culprit is to trim the TMIC shroud. See Shroud Fitment Document for more details.