{"title":"Intake Manifolds","description":"","products":[{"product_id":"skunk2-ultra-race-intake-manifold-d-series","title":"Skunk2 Ultra Race Intake Manifold - D Series","description":"\n\u003cp\u003eThe engineers at Skunk2 Racing have worked tirelessly to develop the next generation of high-performance intake manifolds and are proud to announce the release of the much anticipated Ultra Series Intake Manifold. Years of R\u0026amp;D have culminated in a multi-piece cast aluminum intake manifold that offers advantages that only a modular design could allow.\u003c\/p\u003e\n\u003cp\u003eFollowing our Ultra Race B \u0026amp; K Series Intake Manifolds, as well as using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a three-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum and optional plenum spacers. In addition to CFD testing, the Ultra Series Intake Manifold has undergone extensive in-house dyno and \u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003eon-car testing which has led to a design that is less restrictive, yielding both torque and power gains well over many of the competitors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eUltra Series Intake Manifolds are made from high-grade 356 aluminum alloy for a strong and lightweight design, CNC-machined for a precise fit, and individually inspected for quality assurance. The large 90mm throttle body opening, 81mm velocity stacks, and hi-velocity intake runners with smooth transitions allow the Ultra Series Manifold to outflow the competition. Designed to be used with built, high-horsepower naturally aspirated or forced induction setups, the Skunk2 Ultra Series Intake Manifold helps provide a new level affordable high-end intake technology to the marketplace. 1L and 2L Plenum Spacers upgrades available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003eStandard 3.5L\u003cbr\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003eOptional Billet Aluminium Plenum Spacers in 1L or 2L sizes\u003cbr\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003eHi-Grade Mounting Hardware\u003cbr\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003e6.70\" Tilted \u0026amp; Tapered Hi-Velocity Runners\u003cbr\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003eRaised 81mm Velocity Stacks - Plenty of Material to Port\u003cbr\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003e4 x 1\/8\" NPT, 3 x 1\/4\" NPT and 1 x OEM AIT Port\u003cbr\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003eIncludes Thermal Manifold Flange Gasket\u003cbr\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003eGenerously Cast Runner Walls for Porting\u003cbr\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003eFits ALL Popular Chassis Configurations - Not Just Race Cars\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"xs-ts\"\u003e\u003ciframe width=\"1280\" height=\"720\" src=\"https:\/\/www.youtube.com\/embed\/_GvJZKIrukY\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Silver","offer_id":29175358029923,"sku":"skk307-05-9200","price":1782.79,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":29175358062691,"sku":"skk307-05-9205","price":1762.53,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/d_mani_main.jpg?v=1569190309"},{"product_id":"skunk2-ultra-race-intake-manifold-b-series","title":"Skunk2 Ultra Race Intake Manifold - B Series","description":"\n\u003cp\u003eThe engineers at Skunk2 Racing have worked tirelessly to develop the next generation of high performance intake manifolds and are proud to announce the release of the much anticipated Ultra Series Intake Manifold. \u003cstrong\u003eYears of R\u0026amp;D\u003c\/strong\u003e have culminated in a multi-piece cast aluminium intake manifold that offers advantages that only a modular design could allow.\u003c\/p\u003e\n\u003cp\u003eBuilding upon the performance legacy of our Pro Series Intake Manifold, as well as using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a three-piece modular design that \u003cstrong\u003eallows for easy disassembly, porting, and plenum volume changes\u003c\/strong\u003e through the use of a removable plenum and optional plenum spacers. In addition to CFD testing, the Ultra Series Intake Manifold has undergone extensive \u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003ein-house dyno and on-car testing which has led to a design that is less restrictive, yielding both torque and power gains well over many of the competitors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003eUltra Series Intake Manifolds are made from high-grade 356 aluminium alloy for a strong and lightweight design, CNC-machined for a precise fit, and individually inspected for quality assurance. The large 90mm throttle body opening, 87mm velocity stacks, and hi-velocity intake runners with smooth transitions allow the Ultra Series Manifold to outflow the competition. Designed to be used with built, high-horsepower naturally aspirated or forced induction setups, the Skunk2 Ultra Series Intake Manifold \u003cstrong\u003ehelps provide a new level affordable high-end intake technology\u003c\/strong\u003e to the marketplace.\u003cbr\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cbr\u003e FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAvailable in 3.5L (4.5L and 5.5L configurations require purchase of optional spacers)\u003c\/li\u003e\n\u003cli\u003eOptional Billet Aluminum Plenum Spacers in 1L or 2L sizes\u003c\/li\u003e\n\u003cli\u003eHi-Grade Mounting Hardware\u003c\/li\u003e\n\u003cli\u003e6.5” Tilted \u0026amp; Tapered Hi-Velocity Runners\u003c\/li\u003e\n\u003cli\u003eRaised 87mm Velocity Stacks - Plenty of Material to Port\u003c\/li\u003e\n\u003cli\u003eProvisions for additional injectors on bottom side of runners\u003c\/li\u003e\n\u003cli\u003e90mm Throttle Body Flange - Std. 5.0L Ford Pattern\u003c\/li\u003e\n\u003cli\u003e4 x 1\/8” NPT, 3 x 1\/4” NPT and 1 x OEM AIT Port\u003c\/li\u003e\n\u003cli\u003eIncludes Thermal Manifold Flange Gasket\u003c\/li\u003e\n\u003cli\u003eGenerously Cast Runner Walls for Porting\u003c\/li\u003e\n\u003cli\u003eFits ALL Popular Chassis Configurations - Not Just Race Cars \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003e\u003cspan class=\"product-note-intro\"\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: \u003c\/span\u003eIdeal for turbocharged and extreme naturally aspirated racing applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e3.5 liter= High Horsepower N\/A and Forced Induction applications up to 600hp\u003cbr\u003e 4.5 liter= 600-1000 horsepower\u003cbr\u003e 5.5 liter= 1,000 horsepower and up\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"1280\" height=\"720\" src=\"https:\/\/www.youtube.com\/embed\/_GvJZKIrukY\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Bare Alloy \/ 3.5L","offer_id":29175359864931,"sku":"skk307-05-9000","price":1914.64,"currency_code":"NZD","in_stock":true},{"title":"Black Powdercoat \/ 3.5L","offer_id":29175359897699,"sku":"skk307-05-9055","price":2019.1,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/b_ultra_race_mani_1.jpg?v=1569190309"},{"product_id":"skunk2-pro-series-intake-manifold-b18c-black-top","title":"Skunk2 Pro Series Intake Manifold - B18C (black top)","description":"\n\u003cp\u003eMore than a decade ago, Skunk2’s engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2’s Pro Series Intake Manifold in our signature Black Series finish for Honda's B-series VTEC engines (GS-R only) features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains.\u003cbr\u003e \u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003e\u003cbr\u003e Skunk2’s cast-aluminum Pro Series Intake Manifolds for Honda’s B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors’ manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSkunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"951\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/_GvJZKIrukY\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Silver","offer_id":29175391223907,"sku":"skk307-05-0270","price":636.18,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":29175391191139,"sku":"skk307-05-0275","price":691.33,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/307-05-0270_1.jpg?v=1622520220"},{"product_id":"skunk2-plenum-spacer-ultra-street-b-k","title":"Skunk2 Ultra Street Plenum Spacer","description":"\n\u003cp\u003eForced induction, big block b series or k series owners - you'll wanna add this to the mix.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e.50L Billet Aluminum Spacer\u003c\/li\u003e\n\u003cli\u003eLonger Socket Head Hardware\u003c\/li\u003e\n\u003cli\u003eGaskets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175391551587,"sku":"skk907-05-9100","price":257.96,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/silver_.5_spacer_2_1.jpg?v=1569190312"},{"product_id":"skunk2-pro-series-intake-manifold-b16-b18cr","title":"Skunk2 Pro Series Intake Manifold - B16\/B18CR","description":"\n\u003cp\u003eMore than a decade ago, Skunk2’s engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2’s Pro Series Intake Manifold in its signature Black Series finish for Honda's B-series VTEC engines (non-GS-R) features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains.\u003c\/p\u003e\n\u003cp\u003eSkunk2’s cast-aluminum Pro Series Intake Manifolds for Honda’s B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors’ manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power.\u003c\/p\u003e\n\u003cp\u003eSkunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"951\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/_GvJZKIrukY\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Silver","offer_id":29175419306083,"sku":"skk307-05-0290","price":636.18,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":29175419273315,"sku":"skk307-05-0295","price":691.33,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/0290-01_1.jpg?v=1569190314"},{"product_id":"skunk2-ultra-race-centre-feed-intake-manifold-b-series","title":"Skunk2 Ultra Race Centre Feed Intake Manifold - B Series","description":"\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eSkunk2 Racing is proud to announce the next generation of high-performance intake manifolds! \u003c\/p\u003e\n\u003cp\u003eThe much anticipated Ultra Race Centerfeed Intake Manifold is the result of years worth of R\u0026amp;D and building upon the performance legacy of our Pro Series Intake Manifold. Using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a three-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum and optional plenum spacers. The result is a design that is less restrictive, yielding both torque and power gains well over many of the competitors. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"desctext\"\u003eModular 3pc. Design w\/ Removable Plenum\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"desctext\"\u003e5.0L Plenum Volume**\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"desctext\"\u003e90mm Throttle Body Flange - Std. 5.0L Ford Pattern\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"desctext\"\u003e6.0” Tapered Hi-Velocity Runners\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"desctext\"\u003eRaised 87mm Velocity Stacks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"desctext\"\u003eGenerously Cast Runner Walls for Porting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"desctext\"\u003eProvisions Secondary Fuel Rail \u0026amp; Injectors\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"desctext\"\u003eUniversal Mounting Flange Fits All B VTEC Cylinder Heads\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"desctext\"\u003e3 x 1\/8” NPT and 3 x 1\/4” NPT Accessory Ports\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"desctext\"\u003eHi-Grade Mounting Hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"desctext\"\u003eThermal Gasket Included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"desctext\"\u003eFits MOST Popular Chassis Configurations - Not Just Race Cars\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e**Optional Billet Aluminum Plenum Spacers Available in 1L or 2L Sizes\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003e5.0 Liter \u0026gt; High Horsepower N\/A and Forced Induction Applications to 600HP\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e6.0 Liter \u0026gt; 600-1000HP\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e7.0 Liter \u0026gt; 1,000HP Up\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"1280\" height=\"720\" src=\"https:\/\/www.youtube.com\/embed\/_GvJZKIrukY\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Silver","offer_id":29175628431459,"sku":"skk307-05-9080","price":1934.0,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":29175628464227,"sku":"skk307-05-9085","price":2036.78,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/307-05-9080_s2_02.png?v=1569258620"},{"product_id":"skunk2-pro-series-intake-manifold-d-series","title":"Skunk2 Pro Series Intake Manifold - D Series","description":"\u003cp\u003eMore than a decade ago, Skunk2's engineers revolutionized Honda performance by creating the first-ever, high-flow, cast aluminum intake manifold. Skunk2’s Pro Series Intake Manifold for most Honda SOHC D-series engines features a larger plenum and oversized runners when compared to the OEM version for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains.\u003c\/p\u003e\n\u003cp\u003eSkunk2’s cast-aluminum Pro Series Intake Manifolds for Honda’s D-series engines are a direct-fit replacement for most D-series engines and are compatible with all factory sensors. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors’ manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power.\u003c\/p\u003e\n\u003cp\u003eSkunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"951\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/_GvJZKIrukY\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Silver","offer_id":29175778836579,"sku":"skk307-05-0260","price":638.14,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":42824024424547,"sku":"skk307-05-0265","price":745.5,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/0260-02_1.jpg?v=1569190347"},{"product_id":"skunk2-ultra-race-centre-feed-plenum","title":"Skunk2 Ultra Race Centre Feed Plenum","description":"\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eSkunk2 is proud to introduce the highly anticipated Centerfeed Plenum for the Honda B and K Ultra Race Intake Manifolds!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Ultra Race Centerfeed Plenum has been designed to further improve airflow and reduce lean conditions associated with side-fed manifolds, by moving the throttle body forward and centering it above all intake ports. The centre feed plenum works best with high RPM naturally aspirated engines and all turbocharged\/ supercharged applications.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e5.0L Plenum Volume**\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e90mm Throttle Body Flange - Std. 5.0L Ford Pattern\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSymmetrical Bolt Pattern Allows Plenum to be Flipped\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCast 356 Aluminium Alloy for Strength and Light Weight\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eModular Design Allows for Easy Volume Changes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3 x 1\/8” NPT and 3 x 1\/4” NPT Accessory Ports\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Skunk2","offers":[{"title":"Silver","offer_id":29175794827363,"sku":"skk907-05-0080","price":890.18,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":29175794860131,"sku":"skk907-05-0085","price":967.58,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/907-05-0080_s2_08.png?v=1569190349"},{"product_id":"skunk2-pro-series-intake-manifold-k24a-k20z3","title":"Skunk2 Pro Series Intake Manifold - K24A\/K20Z3\/K20A","description":"\n\u003cp\u003eSkunk2's engineers went back to the drawing board when they set out to improve the already popular '06-'11 Civic Si's\/Accord Euro RBC intake manifold. Each of Skunk2's Pro Series Intake Manifolds for Honda's K-series engines feature larger plenums and shorter, oversized runners when compared to the RBC, and are cast with thicker wall material, leaving room for further porting for high-horsepower applications. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, Pro Series manifolds were designed for the street enthusiast who wants more power but doesn't want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains.\u003c\/p\u003e\n\u003cp\u003eSkunk2's all-new, cast-aluminium Pro Series Intake Manifolds for Honda's K-series engines are a direct-fit replacement for all '06-'11 Civic Si and K20\/K24A2 Accord Euro engines thanks to their unique design and throttle body flanges, which are compatible with OEM throttle bodies as well as those as large as 76mm. A thermal-insulated intake manifold gasket is also included, making for a truly bolt-on installation (no drilling or modifying required). Pro Series manifolds also incorporate an angled-runner design, which allows for ample hood clearance on almost any engine combination.\u003c\/p\u003e\n\u003cp\u003ePro Series Intake Manifolds offer horsepower and torque gains greater than the popular RBC manifold but without compromising mid-range power output. The design incorporates runners that are similar in length to the RBC's but with larger bores, a special tapered design, as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined and hand-finished to best match the cylinder head's ports. Skunk2's Pro Series Intake Manifold's shape and design also increases wave scavenging effects at the engine's ideal operating range, which allow for a broad increase in usable power.\u003c\/p\u003e\n\u003cp\u003eSkunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2's Pro Series Intake Manifolds are shell-molded from 356-aluminium, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for turbocharged and naturally aspirated applications.\u003c\/li\u003e\n\u003cli\u003e72mm throttle body opening can be port-matched up to 76mm.\u003c\/li\u003e\n\u003cli\u003eOnly compatible with '06-'11 Civic Si, K24A2 K-series and K20A (CL7 only) engines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"951\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/_GvJZKIrukY\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Silver","offer_id":29175817896035,"sku":"skk307-05-0320","price":1146.59,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":29175817863267,"sku":"skk307-05-0325","price":1221.58,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/0320-01.jpg?v=1569190351"},{"product_id":"honda-genuine-rbc-intake-manifold","title":"Honda Genuine RBC Intake Manifold","description":"\n\u003cp\u003eThe best bang for buck intake manifold upgrade on the market for K series engines.\u003c\/p\u003e\n\u003cp\u003eIt's as simple as that.\u003c\/p\u003e\n\u003cp\u003ePlease note for DC5\/EP3 owners, you'll need a throttle body adaptor to use your existing throttle body or to purchase an S90 CL7\/9 throttle body which will bolt on.  In this scenario, the EVAP sensor is different so a K-Pro or similar is required to turn this sensor off.  The coolant port must be cut off also.\u003c\/p\u003e","brand":"Honda Genuine Parts","offers":[{"title":"Default Title","offer_id":29176143773795,"sku":"17100-RRB-A00","price":1193.7,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/25-127-thickbox.jpg?v=1580791093"},{"product_id":"skunk2-h-to-k-intake-manifold-adaptor","title":"Skunk2 H to K Intake Manifold Adaptor","description":"\n\u003cp\u003eSkunk2’s K to H Intake Manifold Adapter now offers H22A and F20B owners even more flexibility. The Skunk2 billet aluminum manifold adapter allows K series intake manifolds, including individual throttle bodies, to be bolted onto any H style cylinder head. K series intake manifolds feature shorter runners and larger plenums when compared to H series manifolds, yielding better performance as well as increased hood and firewall clearance. K to H Intake Manifold Adapters fit seamlessly in between the manifold and cylinder head for a factory-like finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"product-fit-list\"\u003e\n\u003cli\u003eCNC Machined Billet 6061 Aluminum\u003c\/li\u003e\n\u003cli\u003eBlack Anodized for Good Looks and Corrosion Resistance\u003c\/li\u003e\n\u003cli\u003eCountersunk Hardware for Easy Hassle Free Installation\u003c\/li\u003e\n\u003cli\u003eMounting Hardware Included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29176229658723,"sku":"skk307-05-0305","price":432.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/dsc_0039_3.jpg?v=1569190371"},{"product_id":"skunk2-plenum-spacer-ultra-race-b-k-d","title":"Skunk2 Ultra Race Plenum Spacers","description":"\u003cp\u003e\u003cstrong\u003eSkunk2 Ultra Plenum Spacers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Skunk2 Racing Plenum Spacer is used to increase the internal volume of the Ultra Race Intake Manifolds.\u003c\/p\u003e\n\u003cp\u003eThe performance benefits are immediate and we recommend 1L Spacer on builds exceeding 500HP and 2L on builds from 600HP+.\u003c\/p\u003e\n\u003cp\u003eIncludes hardware as required\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Raw - 1L","offer_id":29176326914147,"sku":"skk907-05-9001","price":343.48,"currency_code":"NZD","in_stock":true},{"title":"Black - 2L","offer_id":29176326979683,"sku":"skk907-05-9002","price":427.52,"currency_code":"NZD","in_stock":true},{"title":"Black - 1L","offer_id":29176326881379,"sku":"skk907-05-9051","price":348.8,"currency_code":"NZD","in_stock":true},{"title":"Raw - 2L","offer_id":29176326946915,"sku":"skk907-05-9052","price":427.52,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/hard_2liter_800.jpg?v=1569190388"},{"product_id":"skunk2-ultra-street-manifold-k-series","title":"Skunk2 Ultra Street Manifold - K Series","description":"\n\u003cp\u003eThe much anticipated Ultra \"Street\" Intake Manifold for the '02-'05 EP3 Type R and '02-'06 DC5 Type R, and\/ or any swap using the K20A\/ K20A2\/ K20Z1\/ K24A1 engines or cylinder heads has finally arrived!\u003c\/p\u003e\n\u003cp\u003eThe Ultra Series is years of research and development, culminating in a multi-piece cast aluminium intake manifold that offers advantages that only a modular design could allow. Using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a two-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum lid and optional plenum spacers. In addition to CFD testing, the Ultra Series Intake Manifold has undergone extensive in-house dyno testing which has led to a design that is less restrictive, yielding both torque and power gains well over many of the competitors.\u003c\/p\u003e\n\u003cp\u003eSkunk2 Racing Ultra Street Intake Manifolds are cast-aluminium, manufactured from high-grade 356 aluminium alloy for strength and lightweight. Each manifold is CNC-machined for a precise fit and individually inspected for quality assurance. The Ultra Series Street manifold features a generous 71mm throttle body opening and is constructed with thick walls at entry, minimizing concerns of a breakthrough when port matching. Intense planning and design went into the plenum to distribute even airflow to all four cylinders under dynamic load conditions. Placement and design of the velocity stacks were rigorously flow tested to ensure maximum delivery of air to the cylinder. Large velocity stack raised bell mouth entries lead to 6.85” long intake runners with smooth transitions allowing the Ultra Street Intake Manifold to really move some air!\u003c\/p\u003e\n\u003cp\u003eSkunk2 Racing Ultra Street Intake Manifolds are designed to be used in modified naturally aspirated applications as well as mild turbo\/supercharged setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModular 2pc. Design w\/ Removable Plenum\u003c\/li\u003e\n\u003cli\u003eRotatable Plenum Allows Driver-side or Passenger-Side Throttle Body Mounting\u003c\/li\u003e\n\u003cli\u003e1.8L Plenum Volume\u2028**\u003c\/li\u003e\n\u003cli\u003eTapered 6.85\" Long High-Velocity Runners w\/ Raised Velocity Stack Entries\u003c\/li\u003e\n\u003cli\u003eGenerously Cast Runner Walls for Porting\u003c\/li\u003e\n\u003cli\u003e71mm Throttle Body Opening\u003c\/li\u003e\n\u003cli\u003eLightweight 356 Aluminium Alloy Construction\u003c\/li\u003e\n\u003cli\u003eHi-Grade Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eThermal Gasket Included\u003c\/li\u003e\n\u003cli\u003e2 x 1\/4\" NPT and 2 x 1\/8\" NPT Accessory Ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e**Optional Billet Aluminum Plenum Spacer Available in .5L Size\u003c\/p\u003e\n\u003cp\u003eNote: FD\/CL7\/9 owners - you'll need the K-Tuned manifold adaptor to work with this manifold. It does not include the coolant port .\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"1280\" height=\"720\" src=\"https:\/\/www.youtube.com\/embed\/_GvJZKIrukY\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Raw Silver","offer_id":29176388616291,"sku":"skk307-05-0600","price":1272.38,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":29176388649059,"sku":"skk307-05-0605","price":1400.27,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/307-05-0600_s2-12.png?v=1569190396"},{"product_id":"skunk2-ultra-race-intake-manifold-k-series","title":"Skunk2 Ultra Race Intake Manifold - K Series","description":"\n\u003cp\u003eThe engineers at Skunk2 Racing have worked tirelessly to develop the next generation of high-performance intake manifolds and are proud to announce the release of the much anticipated Ultra Series Intake Manifold. \u003cstrong\u003eYears of R\u0026amp;D\u003c\/strong\u003e have culminated in a multi-piece cast aluminium intake manifold that offers advantages that only a modular design could allow.\u003c\/p\u003e\n\u003cp\u003eBuilding upon the performance legacy of our Pro Series Intake Manifold, as well as using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a three-piece modular design that \u003cstrong\u003eallows for easy disassembly, porting, and plenum volume changes\u003c\/strong\u003e through the use of a removable plenum and optional plenum spacers. In addition to CFD testing, the Ultra Series Intake Manifold has undergone extensive \u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003ein-house dyno and on-car testing which has led to a design that is less restrictive, yielding both torque and power gains well over many of the competitors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003eUltra Series Intake Manifolds are made from high-grade 356 aluminium alloy for a strong and lightweight design, CNC-machined for a precise fit, and individually inspected for quality assurance. The large 90mm throttle body opening, 87mm velocity stacks, and hi-velocity intake runners with smooth transitions allow the Ultra Series Manifold to outflow the competition. Designed to be used with built, high-horsepower naturally aspirated or forced induction setups, the Skunk2 Ultra Series Intake Manifold \u003cstrong\u003ehelps provide a new level affordable high-end intake technology\u003c\/strong\u003e to the marketplace.\u003cbr\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cbr\u003e FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAvailable in 3.5L (4.5L and 5.5L configurations require purchase of optional spacers)\u003c\/li\u003e\n\u003cli\u003eOptional Billet Aluminum Plenum Spacers in 1L or 2L sizes\u003c\/li\u003e\n\u003cli\u003eHi-Grade Mounting Hardware\u003c\/li\u003e\n\u003cli\u003e6.5\" Tilted \u0026amp; Tapered Hi-Velocity Runners\u003c\/li\u003e\n\u003cli\u003eRaised 87mm Velocity Stacks - Plenty of Material to Port\u003c\/li\u003e\n\u003cli\u003eProvisions for additional injectors on bottom side of runners\u003c\/li\u003e\n\u003cli\u003e90mm Throttle Body Flange - Std. 5.0L Ford Pattern\u003c\/li\u003e\n\u003cli\u003e4 x 1\/8 NPT, 3 x 1\/4 NPT and 1 x OEM AIT Port\u003c\/li\u003e\n\u003cli\u003eIncludes Thermal Manifold Flange Gasket\u003c\/li\u003e\n\u003cli\u003eGenerously Cast Runner Walls for Porting\u003c\/li\u003e\n\u003cli\u003eFits ALL Popular Chassis Configurations - Not Just Race Cars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"product-note-intro\"\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: \u003c\/span\u003eIdeal for turbocharged and naturally aspirated racing applications.\u003c\/p\u003e\n\u003cp\u003e3.5 liter= High Horsepower N\/A and Forced Induction applications up to 600hp\u003cbr\u003e 4.5 liter= 600-1000 horsepower\u003cbr\u003e 5.5 liter= 1,000 horsepower and up\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitting Notes: \u003c\/strong\u003eCoolant port modification required for fitment on K24\/CL7-9\/FD applications\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"1280\" height=\"720\" src=\"https:\/\/www.youtube.com\/embed\/_GvJZKIrukY\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Bare Alloy","offer_id":29176423055459,"sku":"skk307-05-8000","price":2019.1,"currency_code":"NZD","in_stock":true},{"title":"Black Powdercoat","offer_id":29176423022691,"sku":"skk307-05-8055","price":2104.2,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/800x800_ultra_k_silver_1.jpg?v=1568770530"},{"product_id":"skunk2-honda-pro-series-intake-manifold-h22a","title":"Skunk2 Honda Pro Series Intake Manifold - H22A\/F20B","description":"\u003cp\u003e\u003cstrong\u003eSkunk2 Pro Series Intake Manifold - H22A\/F20B\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMore than a decade ago, Skunk2's engineers revolutionized Honda performance by creating the first-ever, high-flow, cast aluminium intake manifold. Skunk2's Pro Series Intake Manifold for Honda's H-series features a larger plenum and oversized runners when compared to the OEM version for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the street enthusiast who wants more power but doesn't want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains.\u003c\/p\u003e\n\u003cp\u003eSkunk2's cast-aluminium Pro Series Intake Manifolds for Honda's H-series engines are a direct-fit replacement for all H-series engines and are compatible with all factory sensors. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors' manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head's ports. Skunk2's Pro Series Intake Manifold's shape and design also increase wave scavenging effects at the engine's ideal operating range, which allow for a broad increase in usable power.\u003c\/p\u003e\n\u003cp\u003eSkunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2's Pro Series Intake Manifolds are shell-moulded from 356-aluminium, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is moulded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Will not fit in CL1\/CF4 chassis and is a very tight fit in prelude and CD6 chassis. Relocating items on the firewall is required.\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Silver","offer_id":29176437538915,"sku":"skk307-05-0300","price":999.4,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":42722277294179,"sku":"skk307-05-0301","price":1031.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/0300-02.jpg?v=1569190401"},{"product_id":"skunk2-ultra-street-intake-manifold-b-series","title":"Skunk2 Ultra Street Intake Manifold - B Series","description":"\u003cp\u003eThe engineers at Skunk2 Racing have worked tirelessly to develop the next generation of high performance intake manifolds and are proud to announce the release of the much anticipated Ultra Series Intake Manifold. Years of R\u0026amp;D have culminated in a multi-piece cast aluminium intake manifold that offers advantages that only a modular design could allow.\u003c\/p\u003e\n\u003cp\u003eBuilding upon the performance legacy of our Pro Series Intake Manifold, as well as using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a three-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum and optional plenum spacers. In addition to CFD testing, the Ultra Series Intake Manifold has undergone extensive in-house dyno and on-car testing which has led to a design that is less restrictive, yielding both torque and power gains well over many of the competitors.\u003c\/p\u003e\n\u003cp\u003eDetailed and meticulous planning went into every aspect of the Ultra Series Street Intake Manifold. Ultra Series Street Intake Manifolds are manufactured from cast-aluminium high-grade 356 aluminium alloy for lightweight yet added strength over sheet metal manifolds. Each manifold is CNC-machined for a precise fit, and individually inspected for quality assurance. The Ultra Series Street manifold features a generous 74mm throttle body opening and is constructed with thick walls and entry minimizing concerns of breakthrough when port matching. Intense planning and design went into the plenum (1.82L plenum volume) to distribute even airflow to all four cylinders under dynamic load conditions. Placement and design of the velocity stacks were rigorously flow tested to ensure maximum delivery of air to the cylinder. Large velocity stack raised bell mouth entries lead to long 221.5mm intake runners with smooth transitions allowing the Ultra Series Street Intake Manifold to outflow the competition. Designed to be used with modified street applications and mild turbo setups, the Skunk2 Ultra Series Street Intake Manifold helps provide a new level affordable high-end intake technology to the marketplace.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHi-Grade Mounting Hardware\u003c\/li\u003e\n\u003cli\u003e1.82L Plenum Volume\u003c\/li\u003e\n\u003cli\u003e8.72\" Long Runners with Raised Velocity Stacks - Plenty of Material to Port\u003c\/li\u003e\n\u003cli\u003eUnique Mounting Flange Universally Fits All B Series VTEC Heads\u003c\/li\u003e\n\u003cli\u003e74mm Throttle Body Opening\u003c\/li\u003e\n\u003cli\u003eIncludes Thermal Manifold Flange Gasket\u003c\/li\u003e\n\u003cli\u003eGenerously Cast Runner Walls for Porting\u003c\/li\u003e\n\u003cli\u003eFits ALL Popular Chassis Configurations - Not Just Race Cars\u003c\/li\u003e\n\u003cli\u003e320mm at its longest point (flange to tip of tb flange)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWill NOT work with factory throttle body. A minimum of 68mm throttle body is required.\u003c\/li\u003e\n\u003cli\u003eBest suited for modified engines with high compression and\/or aftermarket camshafts. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"1280\" height=\"720\" src=\"https:\/\/www.youtube.com\/embed\/_GvJZKIrukY\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Raw Alloy Finish","offer_id":29176485707875,"sku":"skk307-05-0500","price":1053.01,"currency_code":"NZD","in_stock":true},{"title":"Black Finish","offer_id":42846595088483,"sku":"skk307-05-0505","price":1138.11,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/ultra_street_800_800.jpg?v=1569190409"},{"product_id":"skunk2-pro-series-intake-manifold-k20a-2","title":"Skunk2 Pro Series Intake Manifold K20A\/2","description":"\n\u003cp\u003eSkunk2's engineers looked to the popular '06-'10 Civic Si's RBC intake manifold for inspiration when developing our Pro Series Intake Manifold for K-series engines (excluding '06-'10 Civic Si) and went back to the drawing board.\u003c\/p\u003e\n\u003cp\u003eEach of Skunk2's Pro Series Intake Manifolds for Honda's K-series engines feature \u003cstrong\u003elarger plenums and shorter, oversized runners\u003c\/strong\u003e when compared to the RBC, and are cast with thicker wall material, leaving room for further porting for high-horsepower applications. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, Pro Series manifolds were \u003cstrong\u003edesigned for the street enthusiast who wants more power but doesn't want to sacrifice mid-range performance\u003c\/strong\u003e to get \u003cspan id=\"\" class=\"\"\u003eit. The results are \u003cstrong\u003eimproved airflow, an enhanced venturi effect, and both mid-range and top-end power gains.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSkunk2's all-new, cast-aluminium Pro Series Intake Manifolds for Honda's K-series engines are a direct-fit replacement for all K-series engines (excluding '06-'10 Civic Si) thanks to their unique, patent-pending water neck designs and throttle body flanges, which are compatible with OEM throttle bodies as well as those as large as 76mm. The special water neck designs eliminate the cutting that would otherwise be involved with some RBC applications and the supplied thermal-insulated intake manifold gasket makes for a truly bolt-on installation (no drilling or modifying required). Pro Series manifolds also incorporate an angled-runner design, which allows for ample hood clearance on 98-00 Civics and 90-01 Integras with K-series engine swaps, as well as additional core support clearance on 02-05 Civic Sis.\u003c\/p\u003e\n\u003cp\u003ePro Series Intake Manifolds offer horsepower and torque gains greater than the popular RBC manifold but without compromising mid-range power output. The design incorporates runners that are similar in length to the RBC's but with larger bores, a special tapered design, as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined and hand-finished to best match the cylinder head's ports. Skunk2's Pro Series Intake Manifold's shape and design also increases wave scavenging effects at the engine's ideal operating range, which allow for a broad increase in usable power.\u003c\/p\u003e\n\u003cp\u003eSkunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2's Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"\"\u003eNote:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for turbocharged and naturally aspirated applications.\u003c\/li\u003e\n\u003cli\u003e70mm throttle body opening can be port-matched up to 76mm.\u003c\/li\u003e\n\u003cli\u003e'06+ Civic Si use part # 307-05-0320 \/ 307-05-0325\u003c\/li\u003e\n\u003cli\u003e*Re-uses OEM Coolant Neck*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"951\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/_GvJZKIrukY\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Silver","offer_id":29176517886051,"sku":"skk307-05-0310","price":1146.59,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":32174128693347,"sku":"skk307-05-0315","price":1221.58,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/307-05-0310_1.jpg?v=1569190413"},{"product_id":"skunk2-ultra-street-intake-manifold-mx5-na-nb","title":"Skunk2 Ultra Street Intake Manifold - MX5 NA\/NB","description":"\n\u003cp\u003eThe wait is OVER!! Skunk2 Racing has worked tirelessly to develop the most complete high-performance intake manifold package possible for the NA and NB Mazda Miata!\u003c\/p\u003e\n\u003cp\u003eWelcome the Skunk2 Racing Ultra Street Intake Manifold. Years of R\u0026amp;D have culminated in a multi-piece cast aluminum intake manifold that offers advantages that only a modular design could allow! Building upon the performance legacy of our Pro Series Intake Manifold, as well as using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a three-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum. In addition to CFD testing, the Ultra Street Intake Manifold has undergone extensive in-house dyno and on-car testing which has led to a design that is less restrictive, yielding both torque and power gains well over any other offering!\u003c\/p\u003e\n\u003cp\u003eSkunk2 Racing Ultra Street Intake Manifolds are cast-aluminum, manufactured from high-grade 356 aluminum alloy for strength and lightweight. Each manifold is CNC-machined for a precise fit, and individually inspected for quality assurance. The Ultra Series Street manifold features a generous 68mm throttle body opening and is constructed with thick walls at entry, minimizing concerns of breakthrough when port matching. Intense planning and design went into the plenum (1.8L plenum volume) to distribute even airflow to all four cylinders under dynamic load conditions. Placement and design of the velocity stacks were rigorously flow tested to ensure maximum delivery of air to the cylinder. Large velocity stack raised bell mouth entries lead to 10.00” long intake runners with smooth transitions allowing the Ultra Street Intake Manifold to outflow all other production intake manifolds.\u003c\/p\u003e\n\u003cp\u003eSkunk2 Racing Ultra Street Intake Manifolds are designed to be used in modified naturally aspirated applications as well as mild turbo\/supercharged setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModular 2pc. Design w\/ Removable 1.8L Plenum\u003c\/li\u003e\n\u003cli\u003eTapered 10.00” Long High-Velocity Runners with Raised Velocity Stack Entries\u003c\/li\u003e\n\u003cli\u003e\u2028\u2028Unique Mounting Flange Universally Fits NA \u0026amp; NB Heads\u003c\/li\u003e\n\u003cli\u003eGenerously Cast Runner Walls for Porting\u003c\/li\u003e\n\u003cli\u003e68mm Throttle Body Opening\u003c\/li\u003e\n\u003cli\u003e\u2028Fits ALL Popular Chassis Configurations – Not Just Race Cars\u003c\/li\u003e\n\u003cli\u003eEliminates Obstructive VICS and VTCS Butterflies\u003c\/li\u003e\n\u003cli\u003eLightweight 356 Aluminum Alloy Construction\u003c\/li\u003e\n\u003cli\u003eHi-Grade Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eTapped with 1\/8” NPT, 1\/4” NPT and 10mm Threads for Accessories\u003c\/li\u003e\n\u003cli\u003eIncludes Thermal Intake Gasket and Throttle Cable Bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.speedscience.co.nz\/wp-content\/uploads\/2019\/06\/Mazda_Miata_-_OEM_vs_SK2_Intake_Manifold_-_KWSC_Kit.png\"\u003e\u003cimg class=\"alignnone size-full wp-image-35898\" src=\"https:\/\/www.speedscience.co.nz\/wp-content\/uploads\/2019\/06\/Mazda_Miata_-_OEM_vs_SK2_Intake_Manifold_-_KWSC_Kit.png\" alt=\"\" width=\"1366\" height=\"728\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":30336291962979,"sku":"skk307-10-1000","price":1055.13,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/307-10-1000_s2_02_1.png?v=1569943682"},{"product_id":"epman-extended-intake-manifold-studs-set-d-b-h-f-k-series","title":"EPMAN Extended Intake Manifold Studs Set - D\/B\/H\/F\/K Series","description":"\u003cp\u003e\u003cstrong\u003eEPMAN Extended Manifold Studs Set - D\/B\/H\/F\/K Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSome intake manifolds require the use of longer studs.  Often the OEM studs are kinda crusty too.\u003c\/p\u003e\n\u003cp\u003eThese upgrade stainless type offers the length you need and a fresher, longer-lasting quality.\u003c\/p\u003e\n\u003cp\u003eWork well on exhaust manifold side too.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eM8 x 1.25 x 50mm\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"EPMAN","offers":[{"title":"Default Title","offer_id":30336391086179,"sku":"EP-LS01","price":33.06,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Screen_Shot_2019-10-22_at_10.14.02_PM.png?v=1580885872"},{"product_id":"k-tuned-side-feed-intake-manifold","title":"K-Tuned Side Feed Intake Manifold - K Series","description":"\u003cp\u003eFor our K-Tuned Intake Manifold project we partnered up with a long time friend and owner of Magnus Motorsports to design a performance intake manifold to properly fit multiple K-powered cars. We worked with Magnus previously when they helped us out with the custom intake manifold on our awesome K20 powered RX7. Magnus is well known in the aftermarket industry for their high quality intake manifolds and they have been designing and welding up their own product for several years now. We knew the Magnus design worked, but wanted to collaborate and find an overall manifold layout that addressed the fitment concerns on several different Honda chassis. Clearance to the rad support and the hood were areas that needed attention, so we lowered the plenum and shortened the runners a little bit, while still keeping a clean entry angle into the head port. The result was exactly what we were looking for, a big plenum, short runner, performance intake manifold that fits numerous vehicles. This specific intake manifold design is being offered exclusively by K-Tuned and makes significant top end power gains over the factory intake manifold on both naturally aspirated and forced induction applications. Note that the stock water passage needs to be modified and a K-Tuned AC\/PS Eliminator Pulley setup must be used.\u003c\/p\u003e\n\u003cp\u003eThe K-Tuned Intake Manifold features a very large 4.78L sheet metal plenum shaped in the signature tapered Magnus format. If you look closely at the plenum base and the TB flange, you'll find two custom 6061 billet aluminum pieces that are precision machined using a CNC 3D profiling process. This special CNC process is what ultimately helped make this manifold design possible, allowing us to make the necessary multi-axis CNC cuts. The 90mm throttle body flange matches up perfectly to the plenum and is tapered inward to ensure there is no restriction to the incoming air. The throttle body bolt pattern matches up to the 86-93 Ford Mustang 5.0L specs, which means our K-Tuned 90mm Throttle bodies will bolt up seamlessly. The custom billet plenum base is a work of art, with four precision machined internal V-stacks that are designed to increase runner entry air speed. We also provided 3 x 1\/8 NPT vacuum ports that are neatly tucked away on the plenum base, and positioned between each runner. The runners themselves, measure 5.75\" long with a large diameter of 1.875\", and are capable of supplying even heavily modified K-Series engines with plenty of air. The manifold flange at the cylinder head is available for K20 and K24 heads and is another 6061 billet piece, that maintains proper port entry and injector angles. Included with our manifold is a brushed aluminum K-Tuned Fuel Rail, which is held in place on a rail mount that is designed to keep the stock phenolic fuel rail spacers in place and accept both stock or aftermarket K-Series fuel injectors. As usual, we include all the hardware, specifically the bolts for mounting the manifold to the cylinder head and the 4 bolts for our throttle body. Last, but not least, we placed an aluminum K-Tuned badge on the front of the plenum to add a nice finishing touch.\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eK20 and K24 engines in EG, DC2, EK (w\/ EG subframe only) \u003c\/li\u003e\n\u003cli\u003e02-06 RSX DC5\u003c\/li\u003e\n\u003cli\u003e06-11 Civic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle body Fitment: K-Tuned 80mm and 90mm TB or any TB with a 86-93 Ford 5.0L Mustang flange.\u003c\/li\u003e\n\u003cli\u003eThe stock water pump needs to be modified and a K-Tuned AC\/PS Eliminator Pulley setup must be used. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":32456691187811,"sku":"KTD-INT-K20","price":3243.78,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/k-tuned_intake_manifold_01.jpg?v=1590192115"},{"product_id":"k-tuned-center-feed-intake-manifold","title":"K-Tuned Center Feed Intake Manifold - K Series","description":"\u003cp\u003eFor our K-Tuned Intake Manifold project we partnered up with a long time friend and owner of Magnus Motorsports to design a performance intake manifold to properly fit multiple K-powered cars. We worked with Magnus previously when they helped us out with the custom intake manifold on our awesome K20 powered Mazda RX-7. Magnus is well known in the aftermarket industry for their high quality intake manifolds and they have been designing and welding up their own product for several years now. We knew the Magnus design worked, but wanted to collaborate and find an overall manifold layout that addressed the fitment concerns on several different Honda chassis. Clearance to the rad support and the hood were areas that needed attention, so we lowered the plenum and shortened the runners a little bit, while still keeping a clean entry angle into the head port. The result was exactly what we were looking for, a big plenum, short runner, performance intake manifold that fits numerous vehicles. This specific intake manifold design is being offered exclusively by K-Tuned and makes significant top end power gains over the factory intake manifold on both naturally aspirated and forced induction applications. Note that the stock water passage needs to be modified and a K-Tuned AC\/PS Eliminator Pulley setup must be used. K24 heads will need to use our K24 Intake Manifold Adapter.\u003c\/p\u003e\n\u003cp\u003eThe K-Tuned Center Feed Intake Manifold features a very large 5.2L sheet metal plenum shaped in the signature tapered Magnus format. If you look closely at the head flange and plenum base flange, you'll find two custom 6061 billet aluminum pieces that are precision machined using a CNC 3D profiling process. This special CNC process is what ultimately helped make this manifold design possible, allowing us to make the necessary multi-axis CNC cuts.  The throttle body bolt pattern matches up to the 86-93 Ford Mustang 5.0L specs, which means our K-Tuned 90mm Throttle bodies will bolt up seamlessly. The custom billet plenum base is a work of art, with four precision machined internal V-stacks that are designed to increase runner entry air speed. We also provided  one 3\/8 NPT and two 1\/8 NPT vacuum ports that are neatly tucked away on the plenum base, and positioned between each runner. The runners themselves, measure 5.75\" long with a large diameter of 1.875\", and are capable of supplying even heavily modified K-Series engines with plenty of air. The manifold flange at the cylinder head is available for K20 and K24 heads and is another 6061 billet piece, that maintains proper port entry and injector angles. Included with our manifold is a brushed aluminum K-Tuned Fuel Rail, which is held in place on a rail mount that is designed to keep the stock phenolic fuel rail spacers in place and accept both stock or aftermarket K-Series fuel injectors. As usual, we include all the hardware, specifically the bolts for mounting the manifold to the cylinder head and the 4 bolts for our throttle body. Last, but not least, we placed an aluminum K-Tuned badge on the front of the plenum to add a nice finishing touch.\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplications:  \u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eK-swapped 92-00 Civic (EK with EG Subframe)\u003c\/li\u003e\n\u003cli\u003eK-swapped 94-01 Integra \u003c\/li\u003e\n\u003cli\u003eOther K-Series Chassis (may require modification to fit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle body Fitment: K-Tuned 80mm and 90mm TB or any TB with a 86-93 Ford 5.0L Mustang flange.\u003c\/li\u003e\n\u003cli\u003eThe stock water pump needs to be modified and a K-Tuned AC\/PS Eliminator Pulley Kit must be used. \u003c\/li\u003e\n\u003cli\u003eK24 applications must use K-Tuned K24 Intake Manifold Adapter part# KTD-K24-IMA\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":32456720744547,"sku":"KTD-INT-C20","price":3196.7,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/KTD-INT-C20_002.jpg?v=1590149768"},{"product_id":"skunk2-ultra-race-intake-manifold-k20a2-style-black-adaptor","title":"Skunk2 Ultra Race Intake Manifold - K20A2 Style - Black Adaptor","description":"\u003cp\u003eSkunk2 Racing is proud to announce the next generation of high performance intake manifolds for the '02-'05\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"desctext\"\u003eCivic Si and '02-'06\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eRSX\/ RSX Type S, and\/ or any swap using the K20A\/ K20A2\/ K20Z1\/ K24A1 engines or cylinder heads has finally arrived!\u003c\/p\u003e\n\u003cp\u003eThe much anticipated Ultra Race Intake Manifold is the result of years worth of R\u0026amp;D and building upon the performance legacy of our Pro Series Intake Manifold. Using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a three-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum and optional plenum spacers. The result is a design that is less restrictive, yielding both torque and power gains well over many of the competitors.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModular 3pc. Design w\/ Removable Plenum\u003c\/li\u003e\n\u003cli\u003e3.5L Plenum Volume**\u003c\/li\u003e\n\u003cli\u003e90mm Throttle Body Flange - Std. 5.0L Ford Pattern\u003c\/li\u003e\n\u003cli\u003e6.0” Tapered Hi-Velocity Runners\u003c\/li\u003e\n\u003cli\u003eRaised 87mm Velocity Stacks\u003c\/li\u003e\n\u003cli\u003eGenerously Cast Runner Walls for Porting\u003c\/li\u003e\n\u003cli\u003eProvisions Secondary Fuel Rail \u0026amp; Injectors\u003c\/li\u003e\n\u003cli\u003e4 x 1\/8” NPT, 3 x 1\/4” NPT, and 1 x 3\/8\" NPT Accessory Ports\u003c\/li\u003e\n\u003cli\u003eHi-Grade Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eThermal Gasket Included\u003c\/li\u003e\n\u003cli\u003eFits MOST Popular Chassis Configurations - Not Just Race Cars - See Notes\u003c\/li\u003e\n\u003cli\u003eOptional Billet Aluminum Plenum Spacers Available in 1L or 2L Sizes\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"product-tabs\" class=\"overview\"\u003e\n\u003cdiv id=\"chldsec\" class=\"overview_content_inner tabs-panels\"\u003e\n\u003cdiv id=\"chsp_4\" class=\"panel\"\u003e\n\u003cp\u003eThe K Series Ultra \"Street\" Manifold uses the\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eEARLY\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ePRB\/ PRC style cylinder head and throttle body mounting flange pattern but can be installed on the\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eLATE\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eRBC\/ RBB style cylinder heads through the use of an aftermarket\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/tractuff.com\/products\/tractuff-rbc-rbb-water-bypass-adapter\"\u003eWater Bypass Adapter\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand associated throttle body or throttle body adapter.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eRACE APPLICATIONS ONLY - NOT INTENDED FOR STREET USE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e3.5 Liter \u0026gt; High Horsepower N\/A and Forced Induction Applications to 600HP\u003cbr\u003e4.5 Liter \u0026gt; 600-1000HP\u003cbr\u003e5.5 Liter \u0026gt; 1,000HP Up\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUS Patent: D677700\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e ***Modification required on vehicles using OEM Idler Pulley \u0026amp; Water Pump Housing***\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":32514536538211,"sku":"skk307-05-8050","price":1744.6,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/307-05-8050_1.jpg?v=1589516528"},{"product_id":"skunk2-ultra-race-intake-manifold-f20c-f22c","title":"Skunk2 Ultra Race Intake Manifold - F20C\/ F22C","description":"\u003cp\u003eSkunk2 Racing is proud to announce the next generation of high performance intake manifolds for the '00-'09 S2000 F20C and F22C have finally arrived!\u003c\/p\u003e\n\u003cp\u003eThe much anticipated Ultra Race Intake Manifold is the result of years worth of R\u0026amp;D and building upon the performance legacy of our Pro Series Intake Manifold. Using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a three-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum and optional plenum spacers. The result is a design that is less restrictive, yielding both torque and power gains well over many of the competitors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModular 3pc. Design w\/ Removable Plenum\u003c\/li\u003e\n\u003cli\u003e3.5L Plenum Volume**\u003c\/li\u003e\n\u003cli\u003e90mm Throttle Body Flange - Std. 5.0L Ford Pattern\u003c\/li\u003e\n\u003cli\u003eTapered Hi-Velocity Runners\u003c\/li\u003e\n\u003cli\u003eRaised 87mm Velocity Stacks\u003c\/li\u003e\n\u003cli\u003eGenerously Cast Runner Walls for Porting\u003c\/li\u003e\n\u003cli\u003eProvisions Secondary Fuel Rail \u0026amp; Injectors\u003c\/li\u003e\n\u003cli\u003e4 x 1\/8” NPT, 3 x 1\/4” NPT, and 1 x 3\/8\" NPT Accessory Ports\u003c\/li\u003e\n\u003cli\u003eHi-Grade Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eThermal Gasket Included\u003c\/li\u003e\n\u003cli\u003eFits MOST Popular Chassis Configurations - Not Just Race Cars - See Notes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e**Optional Billet Aluminum Plenum Spacers Available in 1L or 2L Sizes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe F20C\/ F22C Ultra Intake Manifold is a competition product and does not have provisions for Idle Air Control. A throttle body or throttle body adapter will be required\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRACE APPLICATIONS ONLY - NOT INTENDED FOR STREET USE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3.5 Liter \u0026gt; High Horsepower N\/A and Forced Induction Applications to 600HP\u003cbr\u003e4.5 Liter \u0026gt; 600-1000HP\u003cbr\u003e5.5 Liter \u0026gt; 1,000HP Up\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUS Patent: D677700\u003c\/strong\u003e\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":32514628517987,"sku":"skk307-05-9100","price":2021.02,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/307-05-9100_1.jpg?v=1589516542"},{"product_id":"skunk2-ultra-race-intake-manifold-b-vtec-black-adapter","title":"Skunk2 Ultra Race Intake Manifold - B VTEC - Black Adapter","description":"\u003cp\u003eSkunk2 Racing is proud to announce the next generation of high performance intake manifolds for the Honda B16A\/ B17A and B18C engine or VTEC cylinder heads!\u003c\/p\u003e\n\u003cp\u003eThe much anticipated Ultra Race Intake Manifold is the result of years worth of R\u0026amp;D and building upon the performance legacy of our Pro Series Intake Manifold. Using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a three-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum and optional plenum spacers. The result is a design that is less restrictive, yielding both torque and power gains well over many of the competitors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModular 3pc. Design w\/ Removable Plenum\u003c\/li\u003e\n\u003cli\u003e3.5L Plenum Volume**\u003c\/li\u003e\n\u003cli\u003e90mm Throttle Body Flange - Std. 5.0L Ford Pattern\u003c\/li\u003e\n\u003cli\u003e6.5” Tilted \u0026amp; Tapered Hi-Velocity Runners\u003c\/li\u003e\n\u003cli\u003eRaised 87mm Velocity Stacks\u003c\/li\u003e\n\u003cli\u003eGenerously Cast Runner Walls for Porting\u003c\/li\u003e\n\u003cli\u003eProvisions Secondary Fuel Rail \u0026amp; Injectors\u003c\/li\u003e\n\u003cli\u003e4 x 1\/8” NPT, 2 x 1\/4” NPT and 1 x OEM AIT Port\u003c\/li\u003e\n\u003cli\u003eHi-Grade Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eThermal Gasket Included\u003c\/li\u003e\n\u003cli\u003eFits MOST Popular Chassis Configurations - Not Just Race Cars - See Notes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e**Optional Billet Aluminum Plenum Spacers Available in 1L or 2L Sizes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRACE APPLICATIONS ONLY - NOT INTENDED FOR STREET USE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3.5 Liter \u0026gt; High Horsepower N\/A and Forced Induction Applications to 600HP\u003cbr\u003e4.5 Liter \u0026gt; 600-1000HP\u003cbr\u003e5.5 Liter \u0026gt; 1,000HP Up\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUS Patent: D67397\u003c\/strong\u003e\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":32514658041955,"sku":"skk307-05-9050","price":1934.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/307-05-9050_1.jpg?v=1589516555"},{"product_id":"skunk2-ultra-race-centerfeed-intake-manifold-k20a2-style","title":"Skunk2 Ultra Race Centerfeed Intake Manifold - K Series","description":"\u003cp\u003eSkunk2 Racing is proud to announce the next generation of high performance intake manifolds for the '02-'05 Civic Ep3 Type R and '02-'06 DC5 Type R, and\/ or any swap using the K20A\/ K20A2\/ K20Z1\/ K24A1 engines or cylinder heads has finally arrived!\u003c\/p\u003e\n\u003cp\u003eThe much anticipated Ultra Race \u003cstrong\u003eCenterfeed\u003c\/strong\u003e Intake Manifold is the result of years worth of R\u0026amp;D and building upon the performance legacy of our Pro Series Intake Manifold. Using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a three-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum and optional plenum spacers. The result is a design that is less restrictive, yielding both torque and power gains well over many of the competitors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModular 3pc. Design w\/ Removable Plenum\u003c\/li\u003e\n\u003cli\u003e5.0L Plenum Volume**\u003c\/li\u003e\n\u003cli\u003e90mm Throttle Body Flange - Std. 5.0L Ford Pattern\u003c\/li\u003e\n\u003cli\u003e6.0” Tapered Hi-Velocity Runners\u003c\/li\u003e\n\u003cli\u003eRaised 87mm Velocity Stacks\u003c\/li\u003e\n\u003cli\u003eGenerously Cast Runner Walls for Porting\u003c\/li\u003e\n\u003cli\u003eProvisions Secondary Fuel Rail \u0026amp; Injectors\u003c\/li\u003e\n\u003cli\u003e3 x 1\/8” NPT and 3 x 1\/4” NPT Accessory Ports\u003c\/li\u003e\n\u003cli\u003eHi-Grade Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eThermal Gasket Included\u003c\/li\u003e\n\u003cli\u003eFits MOST Popular Chassis Configurations - Not Just Race Cars - See Notes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e**Optional Billet Aluminum Plenum Spacers Available in 1L or 2L Sizes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe K Series Ultra \"Street\" Manifold uses the EARLY PRB\/ PRC style cylinder head and throttle body mounting flange pattern but can be installed on the LATE RBC\/ RBB style cylinder heads through the use of an aftermarket \u003ca href=\"https:\/\/tractuff.com\/products\/tractuff-rbc-rbb-water-bypass-adapter\"\u003eWater Bypass Adapter\u003c\/a\u003e and associated throttle body or throttle body adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRACE APPLICATIONS ONLY - NOT INTENDED FOR STREET USE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e5.0 Liter \u0026gt; High Horsepower N\/A and Forced Induction Applications to 600HP\u003cbr\u003e6.0 Liter \u0026gt; 600-1000HP\u003cbr\u003e7.0 Liter \u0026gt; 1,000HP Up\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eUS Patent: D677700\u003c\/strong\u003e\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Silver","offer_id":32514693136483,"sku":"skk307-05-8080","price":2036.78,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":42824058241123,"sku":"skk307-05-8085","price":2104.2,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/307-05-8080_1.jpg?v=1589516568"},{"product_id":"skunk2-pro-intake-manifold-b18a-b20","title":"Skunk2 Pro Intake Manifold - B18B\/B20","description":"\u003cp\u003eMore than a decade ago, Skunk2’s engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2’s Pro Series Intake Manifold for Honda's B-series non-VTEC engines features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains.\u003c\/p\u003e\n\u003cp\u003eSkunk2’s cast-aluminum Pro Series Intake Manifolds for Honda’s B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors’ manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power.\u003c\/p\u003e\n\u003cp\u003eSkunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot compatible with ’90-’93 engines featuring EGR valve; must use reprogrammed or later model ECU.\u003cbr\u003eNot compatible with ’90-’95 throttle bodies featuring fast idle valve; must use Skunk2 throttle body or similar.\u003cbr\u003e70mm throttle body opening can be port-matched up to 74mm.\u003cbr\u003eNot compatible with B20Z head.\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":32514866085987,"sku":"skk307-05-0280","price":636.18,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/307-05-0280_1.jpg?v=1589516595"},{"product_id":"skunk2-pro-intake-manifold-evo-viii-ix","title":"Skunk2 Pro Series Intake Manifold - Evo 7-8-9","description":"\u003cdiv class=\"block75\"\u003e\nThe intake manifold solution street-driven Evo VII-IX owners have been waiting for is here. Skunk2’s newly designed Evo Pro Series Intake Manifold was designed with “street enthusiasts” who utilize turbochargers as small as the factory unit in mind and want more power without sacrificing mid-range performance.\n\u003cdiv\u003e\n\u003cbr\u003eSkunk2’s all-new, cast-aluminum Evo Pro Series Intake Manifold—which was tested and developed on the company’s own Evo Time Attack race car—is a direct-fit replacement and offers significant horsepower and torque gains without compromising mid-range power output. Conventional large-plenum, short-runner intake manifolds provide top-end power gains but suffer in the mid-range. Not Skunk2’s. Its all-new Pro Series Intake Manifold features OEM-length runners with larger bores and a special tapered design as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end gains. Peak gains as high as 33+ whp have been realized when paired with Pro Series Throttle Bodies with positive results across the board, beginning as low as 3,200 rpm.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003ePro Series Intake Manifolds also feature thicker castings when compared to the OEM piece, which leaves plenty of room for porting, and each runner exit is machined and hand-finished to best match the cylinder head’s ports. The Pro Series Intake Manifold’s unique design increases wave scavenging effects at the engine’s ideal operating range, which allows for a broad increase in usable power. Skunk2’s Evo Pro Series Intake Manifold is a simple bolt-on affair. Unlike other intake manifolds, Skunk2’s incorporates the factory configuration, leaving the throttle body in its original location, which means the original intercooler piping and hoses can be reused. Pro Series Intake Manifolds also include the necessary provisions for the Evo’s brake booster line, MDP sensor, and vacuum accessories (EGR valve excluded), and incorporate two additional 1\/8-inch NPT threaded ports, which can be used for any number of vacuum\/boost-related devices such as gauges, boost controllers, and more. Each manifold comes equipped with plugs and fittings as well as a dipstick k relocator.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003eSkunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out, and features a genuine Skunk2 nameplate.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e \u003cbr\u003eMatch with a Skunk2 Pro Series Throttle Body for an easy 30+ hp gain.\u003cbr\u003e\u003cbr\u003e- NPT threaded ports\u003cbr\u003e- Hardware with plugs or barbed fittings for vacuum purposes\u003cbr\u003e- Dipstick Relocator\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Skunk2","offers":[{"title":"Silver","offer_id":32514919071843,"sku":"skk307-06-0500","price":1244.69,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":32514919137379,"sku":"skk307-06-0505","price":1329.79,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/307-06-0500_1.jpg?v=1589516621"},{"product_id":"skunk2-ultra-street-plenum-spacer-black","title":"Skunk2 Ultra Street Plenum Spacer - Black","description":"\u003cp\u003eThe Skunk2 Racing Plenum Spacer is used to increase the internal volume of the Ultra \u003cstrong\u003e\"Street\"\u003c\/strong\u003e Intake Manifolds by .50 Liters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e.50L Billet Aluminum Spacer\u003cbr\u003eLonger Socket Head Hardware\u003cbr\u003eGaskets\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":32514941026403,"sku":"skk907-05-9101","price":257.96,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/907-05-9101_1.jpg?v=1589516645"},{"product_id":"skunk2-composite-plenum-spacer-vq35","title":"Skunk2 Composite Plenum Spacer - VQ35","description":"\u003cp\u003eSkunk2’s revised Nissan\/Infiniti VQ35 Composite Intake Plenum Spacer V2.0 is dyno proven and road tested to outperform all other intake manifold plenum spacers. Skunk2’s Intake Plenum Spacer V2.0 features a number of improvements, including a thicker design that increases plenum volume, lowers intake temperatures, and allows the engine’s front cylinders to breathe more efficiently. All of this results in gains as high as 10 hp, increased throttle response, and a fuel efficiency increase of more than 2mpg. Unlike competitors’ spacers, Skunk2’s Intake Plenum Spacer V2.0 is constructed from an aerospace thermo-polymer composite that offers superior thermal insulation characteristics when compared to aluminum spacers or other heat-insulating gasket materials. A unique, industry-first, each plenum spacer’s perimeter is injected sealed for tight fitment, eliminating the OEM gasket. Skunk2’s plenum spacer is also easy to install and is packaged with all necessary hardware, including the necessary components to bypass the throttle body’s water lines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis Gasket is 5\/8 of an inch thick. helping to lower intake temperatures, increase plenum volume, and gain horsepower.\u003cbr\u003eNot compatible with Factory Strut Tower Bar*\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":32514965864547,"sku":"skk307-07-0400","price":510.39,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/307-07-0400_1.jpg?v=1589516658"},{"product_id":"skunk2-ultra-race-side-feed-plenum-b-d-series-silver","title":"Skunk2 Ultra Race Side-Feed Plenum - D\/B Series - Silver","description":"\u003cspan\u003eThis is a Skunk2 factory replacement 3.5L Plenum part for the Ultra Race Side-Feed B \u0026amp; D Series Intake Manifolds; 307-05-9000, 307-05-9200, 307-05-9050. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e• Removable Plenum in Silver\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• 3.5L Plenum Volume\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• 90mm Throttle Body Flange - Std. 5.0L Ford Pattern\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• US Patent: D673977\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOptional Billet Aluminum Plenum Spacers Available in 1L or 2L Sizes:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003ca href=\"https:\/\/skunk2.com\/907-05-9001.html\"\u003e• 907-05-9001 Ultra Race Plenum Spacer - 1L Silver\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/skunk2.com\/907-05-9051.html\"\u003e• 907-05-9051 Ultra Race Plenum Spacer - 1L Black\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/skunk2.com\/907-05-9002.html\"\u003e• 907-05-9002 Ultra Race Plenum Spacer - 2L Silver\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/skunk2.com\/907-05-9052.html\"\u003e• 907-05-9052 Ultra Race Plenum Spacer - 2L Black\u003c\/a\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":32514973466723,"sku":"skk907-05-0060","price":839.38,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/907-05-0060_1.jpg?v=1589516664"},{"product_id":"skunk2-ultra-race-side-feed-plenum-b-d-series-black","title":"Skunk2 Ultra Race Side-Feed Plenum - D\/B Series - Black","description":"\u003cspan\u003eThis is a Skunk2 factory replacement 3.5L Plenum part for the Ultra Race Side-Feed B \u0026amp; D Series Intake Manifolds; 307-05-9000, 307-05-9200, 307-05-9050. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eRemovable Plenum in Silver 907-05-0060 or Black 907-05-0065\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3.5L Plenum Volume\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e90mm Throttle Body Flange - Std. 5.0L Ford Pattern\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUS Patent: D673977\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":32514984509539,"sku":"skk907-05-0065","price":916.79,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/907-05-0065_1.jpg?v=1589516675"},{"product_id":"skunk2-ultra-race-side-feed-plenum-k-series-silver","title":"Skunk2 Ultra Race Side-Feed Plenum - K Series - Silver","description":"\u003cspan\u003eThis is a Skunk2 factory replacement 3.5L Plenum part for the Ultra Race Side-Feed K Series Intake Manifolds; 307-05-8000, 307-05-8050 and 307-05-8055. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eRemovable Plenum in Silver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3.5L Plenum Volume\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e90mm Throttle Body Flange - Std. 5.0L Ford Pattern\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUS Patent: D673977\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":32514991095907,"sku":"skk907-05-0070","price":839.38,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/907-05-0070_1_1.jpg?v=1589516687"},{"product_id":"skunk2-remote-iacv-kit","title":"Skunk2 Remote IACV Kit","description":"\u003cdiv class=\"block75\"\u003e\n\u003cdiv class=\"product-view\" itemscope=\"\" itemtype=\"http:\/\/schema.org\/Product\"\u003e\n\u003cdiv id=\"product-tabs\" class=\"overview\"\u003e\n\u003cdiv id=\"chldsec\" class=\"overview_content_inner tabs-panels\"\u003e\n\u003cdiv id=\"chsp_1\" class=\"panel\"\u003e\n\u003cp\u003eThe Skunk2 Racing Remote IACV Kit allows the installation and use of a B or D Series Idle Air Control Motor on intake manifolds that were not designed with the provision or for those that require to be relocated. Very handy for customers looking to retain the IACV feature when using the Skunk2 Ultra Race line of intake manifolds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned to Use the Honda B or D Series IACV Motor.\u003c\/p\u003e\n\u003cp\u003eIncluded in B-Series Ultra Street Manifolds.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"block25\"\u003e\n\u003cdiv class=\"block_bdr1\"\u003e\n\u003cdiv class=\"block75\"\u003e\n\u003cdiv class=\"product-view\" itemscope=\"\" itemtype=\"http:\/\/schema.org\/Product\"\u003e\n\u003cdiv id=\"product-tabs\" class=\"overview\"\u003e\n\u003cdiv id=\"chldsec\" class=\"overview_content_inner tabs-panels\"\u003e\n\u003cdiv id=\"chsp_4\" class=\"panel\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"block25\"\u003e\n\u003cdiv class=\"block_bdr1\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":32520966406243,"sku":"skk307-05-9565","price":128.18,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/307-05-9565_skunk2_006.png?v=1589532642"},{"product_id":"skunk2-ultra-race-plenum-adapter-gasket-b-d-series","title":"Skunk2 Ultra Race Plenum Adapter Gasket - D\/B Series","description":"\u003cdiv id=\"product-tabs\" class=\"overview\"\u003e\n\u003cdiv id=\"chldsec\" class=\"overview_content_inner tabs-panels\"\u003e\n\u003cdiv id=\"chsp_1\" class=\"panel\"\u003e\n\u003cp\u003eReplacement gasket for Ultra Race manifold to use between Plenum Base Adapter and Runners.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":32521321971811,"sku":"skk907-05-0010","price":53.08,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/907-05-0010_1.jpg?v=1589602682"},{"product_id":"skunk2-ultra-race-plenum-adapter-gasket-k-series","title":"Skunk2 Ultra Race Plenum Adapter Gasket - K Series","description":"\u003cdiv id=\"product-tabs\" class=\"overview\"\u003e\n\u003cdiv id=\"chldsec\" class=\"overview_content_inner tabs-panels\"\u003e\n\u003cdiv id=\"chsp_1\" class=\"panel\"\u003e\n\u003cp\u003eReplacement gasket for Ultra Race manifold to use between Plenum Base Adapter and Runners.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":32521341501539,"sku":"skk907-05-0020","price":53.08,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/907-05-0020_1.jpg?v=1589602684"},{"product_id":"ultra-street-plenum-gasket","title":"Skunk2 Ultra Street Plenum Gasket","description":"\u003cdiv class=\"block75\"\u003e\n\u003cdiv class=\"product-view\" itemscope=\"\" itemtype=\"http:\/\/schema.org\/Product\"\u003e\n\u003cdiv id=\"product-tabs\" class=\"overview\"\u003e\n\u003cdiv id=\"chldsec\" class=\"overview_content_inner tabs-panels\"\u003e\n\u003cdiv id=\"chsp_1\" class=\"panel\"\u003e\n\u003cp\u003eReplacement gasket for Ultra Street manifold to plenum or manifold\/ plenum to spacer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":32521374007395,"sku":"skk907-05-0030","price":53.08,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/907-05-0030_1.jpg?v=1589602686"},{"product_id":"skunk2-ultra-race-plenum-gasket","title":"Skunk2 Ultra Race Plenum Gasket","description":"\u003cdiv class=\"block75\"\u003e\n\u003cdiv class=\"product-view\" itemscope=\"\" itemtype=\"http:\/\/schema.org\/Product\"\u003e\n\u003cdiv id=\"product-tabs\" class=\"overview\"\u003e\n\u003cdiv id=\"chldsec\" class=\"overview_content_inner tabs-panels\"\u003e\n\u003cdiv id=\"chsp_1\" class=\"panel\"\u003e\n\u003cp\u003eReplacement gasket for Ultra Race manifolds to plenum or manifold\/ plenum to spacer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":32521410281571,"sku":"skk907-05-0034","price":53.06,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/907-05-0034_1.jpg?v=1589602688"},{"product_id":"skunk2-h-pro-manifold-hardware-kit","title":"Skunk2 H Pro Manifold Hardware Kit","description":"\u003cspan\u003eThe H Manifold Hardware Kit is a quick and easy way to get all the support parts for Skunk2 H22A \/ F20B Pro Intake Manifolds; 307-05-0300 \u0026amp; 307-05-0301.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWhether you took your manifold apart, lost some parts, stripped a bolt, or ripped a gasket; this complete hardware kit includes everything that originally came with your H22 \/ F20B Pro Series Intake Manifold.\u003c\/span\u003e\u003cbr\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":32521427058787,"sku":"skk907-05-0399","price":130.31,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/307-05-0399_s2_01.png?v=1589538378"},{"product_id":"skunk2-ultra-street-manifold-hardware-kit-b-series","title":"Skunk2 Ultra Street Manifold Hardware Kit - B Series","description":"\u003cp\u003eWhether you took your manifold apart, stripped out a bolt, ripped a gasket or simply lost a fitting, this complete hardware kit includes everything that came with your Skunk2 Racing B Ultra Street Manifold when new.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKIT INCLUDES:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Thermal Manifold Gasket\u003c\/li\u003e\n\u003cli\u003e(2) Hex Socket Plug, 0.125”\u003c\/li\u003e\n\u003cli\u003e(1) Hex Socket Plug, 0.25”\u003c\/li\u003e\n\u003cli\u003e(3) BARB Fitting, 0.375”\u003c\/li\u003e\n\u003cli\u003e(2) BARB Fitting, 0.25”\u003c\/li\u003e\n\u003cli\u003e(1) Water Port Plug\u003c\/li\u003e\n\u003cli\u003e(1) Water Port Fitting\u003c\/li\u003e\n\u003cli\u003e(2) Hose Clamps, 5\/16”\u003c\/li\u003e\n\u003cli\u003e(1) Breather, 3\/4”\u003c\/li\u003e\n\u003cli\u003e(2) Flange Nut, M8\u003c\/li\u003e\n\u003cli\u003e(1) PCV Hose, 3\/8 ID, Length - 10”\u003c\/li\u003e\n\u003cli\u003e(1) Intake Manifold Gasket\u003c\/li\u003e\n\u003cli\u003e(1) Throttle Cable Bracke\u003c\/li\u003e\n\u003cli\u003e(1) Remote IACV Mount\u003c\/li\u003e\n\u003cli\u003e(10) Bolts, M6\u003c\/li\u003e\n\u003cli\u003e(1) Skunk2 Ultra Badge\u003c\/li\u003e\n\u003cli\u003e(1) Skunk2 Racing Decal, 12”\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":32521466806371,"sku":"skk907-05-0500","price":257.96,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/907-05-0500_s2_01.png?v=1589538728"},{"product_id":"skunk2-ultra-street-manifold-hardware-kit-k-series","title":"Skunk2 Ultra Street Manifold Hardware Kit - K Series","description":"\u003cp\u003eWhether you took your manifold apart, stripped out a bolt, ripped a gasket or simply lost a fitting, this complete hardware kit includes everything that came with your Skunk2 Racing K Ultra Street Manifold when new.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKIT INCLUDES:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Intake Manifold Gasket\u003c\/li\u003e\n\u003cli\u003e(1) Hex Socket Plug, 0.125”\u003c\/li\u003e\n\u003cli\u003e(1) Hex Socket Plug, 0.25”\u003c\/li\u003e\n\u003cli\u003e(2) BARB Fitting, 0.375”\u003c\/li\u003e\n\u003cli\u003e(2) BARB Fitting, 0.25”\u003c\/li\u003e\n\u003cli\u003e(1) Thermal Manifold Gasket\u003c\/li\u003e\n\u003cli\u003e(10) Bolts, M6\u003c\/li\u003e\n\u003cli\u003e(1) Skunk2 Ultra Badge\u003c\/li\u003e\n\u003cli\u003e(1) Skunk2 Racing Decal, 12”\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":32521487974499,"sku":"skk907-05-0600","price":257.96,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/907-05-0600_s2_01.png?v=1589539039"},{"product_id":"skunk2-ultra-race-manifold-hardware-kit-centerfeed-k-series","title":"Skunk2 Ultra Race Manifold Hardware Kit - Centerfeed - K Series","description":"\u003cp\u003eWhether you took your manifold apart, stripped out a bolt, ripped a gasket or simply lost a fitting, this complete hardware kit includes everything that came with your Skunk2 Racing K Ultra Race Centerfeed Manifold when new.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKIT INCLUDES:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Intake Manifold Gasket\u003c\/li\u003e\n\u003cli\u003e(2) Hex Socket Plug, 0.125”\u003c\/li\u003e\n\u003cli\u003e(2) Hex Socket Plug, 0.25”\u003c\/li\u003e\n\u003cli\u003e(3) BARB Fitting, 0.375”\u003c\/li\u003e\n\u003cli\u003e(3) BARB Fitting, 0.25”\u003c\/li\u003e\n\u003cli\u003e(2) Flange Nut, M8\u003c\/li\u003e\n\u003cli\u003e(2) Stud, M8\u003c\/li\u003e\n\u003cli\u003e(1) Thermal Manifold Gasket\u003c\/li\u003e\n\u003cli\u003e(12) Bolt. M6x1.0x15mm\u003c\/li\u003e\n\u003cli\u003e(14) Bolt. M6x1.0x25mm\u003c\/li\u003e\n\u003cli\u003e(1) Skunk2 Ultra Badge\u003c\/li\u003e\n\u003cli\u003e(1) Skunk2 Racing Decal, 12”\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":32521511960675,"sku":"skk907-05-8080","price":257.96,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/907-05-8000_s2_02_1.png?v=1589539480"},{"product_id":"skunk2-ultra-race-manifold-hardware-kit-centerfeed-b-series","title":"Skunk2 Ultra Race Manifold Hardware Kit - Centerfeed - B Series","description":"\u003cp\u003eWhether you took your manifold apart, stripped out a bolt, ripped a gasket or simply lost a fitting, this complete hardware kit includes everything that came with your Skunk2 Racing B Ultra Race Centerfeed Manifold when new.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKIT INCLUDES:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Intake Manifold Gasket\u003c\/li\u003e\n\u003cli\u003e(2) Hex Socket Plug, 0.125”\u003c\/li\u003e\n\u003cli\u003e(2) Hex Socket Plug, 0.25”\u003c\/li\u003e\n\u003cli\u003e(3) BARB Fitting, 0.375”\u003c\/li\u003e\n\u003cli\u003e(3) BARB Fitting, 0.25”\u003c\/li\u003e\n\u003cli\u003e(1) Water Port Plug\u003c\/li\u003e\n\u003cli\u003e(1) Water Port Fitting\u003c\/li\u003e\n\u003cli\u003e(1) Thermal Manifold Gasket\u003c\/li\u003e\n\u003cli\u003e(12) Bolt. M6x1.0x12\u003c\/li\u003e\n\u003cli\u003e(14) Bolt. M6x1.0x25mm\u003c\/li\u003e\n\u003cli\u003e(1) Skunk2 Ultra Badge\u003c\/li\u003e\n\u003cli\u003e(1) Skunk2 Racing Decal, 12”\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":32521525493859,"sku":"skk907-05-9080","price":257.96,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/907-05-9080_s2_01.png?v=1589539910"},{"product_id":"skunk2-evo-complete-assembly-hardware-kit","title":"Skunk2 EVO Manifold Complete Assembly Hardware Kit","description":"\u003cdiv id=\"product-tabs\" class=\"overview\"\u003e\n\u003cdiv id=\"chldsec\" class=\"overview_content_inner tabs-panels\"\u003e\n\u003cdiv id=\"chsp_1\" class=\"panel\"\u003e\n\u003cp\u003eWhether you took your manifold apart, stripped out a bolt, ripped a gasket or simply lost a fitting, this complete hardware kit includes everything that came with your Skunk2 Racing EVO VIII-IX Pro Intake Manifold (#307-06-0500; #307-06-0505) when new.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKIT INCLUDES:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e(3) Flange Bolt M6x1.0x10mm\u003cbr\u003e(2) Fuel Rail Spacer\u003cbr\u003e(1) Pro Series Intake Technology Badge\u003cbr\u003e(4) Hex Socket Plug 1.125IN\u003cbr\u003e(1) Oil Dipstick Tubing\u003cbr\u003e(1) Viton O-Ring\u003cbr\u003e(1) 68MM Throttle Body Gasket\u003cbr\u003e(3) Fitting\u003cbr\u003e(1) Fitting\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"box-additional box-up-sell grid12-12\"\u003e\n\u003cdiv class=\"clear_div\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"upsell-products\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":32521530212451,"sku":"skk907-06-0500","price":257.96,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/907-06-0500_s2_01.png?v=1589540066"},{"product_id":"skunk2-miata-complete-assembly-hardware-kit","title":"Skunk2 Miata Complete Pro Series Manifold Assembly Hardware Kit","description":"\u003cp\u003eWhether you took your manifold apart, stripped out a bolt, ripped a gasket or simply lost a fitting, this complete hardware kit includes everything that came with your Skunk2 Racing Ultra Street Miata NA\/ NB Intake Manifold (#307-10-1000) when new.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKIT INCLUDES:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 4MM Hose Barb Fitting\u003c\/li\u003e\n\u003cli\u003e(1) Intake Manifold Gasket\u003c\/li\u003e\n\u003cli\u003e(1) Thermal Intake Manifold Gasket\u003c\/li\u003e\n\u003cli\u003e(1) Skunk2 Ultra Intake Technology Badge\u003c\/li\u003e\n\u003cli\u003e(1) Hex Socket Plug 0.125IN\u003c\/li\u003e\n\u003cli\u003e(1) Hex Socket Plug 0.25IN\u003c\/li\u003e\n\u003cli\u003e(2) BARB Fitting, 0.375”\u003c\/li\u003e\n\u003cli\u003e(1) Throttle Cable Bracket Adapter\u003c\/li\u003e\n\u003cli\u003e(3) AHCS Bolt M6x1.0x20MM\u003c\/li\u003e\n\u003cli\u003e(2) Flange Bolt M6x1.0x20MM\u003c\/li\u003e\n\u003cli\u003e(7) AHCS Low Head Bolt M6x1.0x30MM\u003c\/li\u003e\n\u003cli\u003e(1) PCV Hose\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":32521541812323,"sku":"skk907-10-1000","price":233.49,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/907-10-1000_s2_01.png?v=1589540469"},{"product_id":"grams-performance-intake-manifold-vw-mkiv-1-8t-large-port","title":"Grams Performance Intake Manifold - VW MKIV 1.8T - Large Port","description":"\u003cp\u003eThe Grams Performance \u0026amp; Design Modular High Performance Intake Manifold for the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eVW MKIV 1.8T\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ehas arrived!\u003c\/p\u003e\n\u003cp\u003eOur unique two-piece modular intake manifold has been designed to be a bolt-on replacement for the anemic OEM unit, incorporating a removable plenum lid that not only allows for easy disassembly, porting, and plenum volume changes but can also be rotated to position the throttle body on either the driver or passenger side of the engine bay. \u2028\u003c\/p\u003e\n\u003cp\u003eThe Grams Performance \u0026amp; Design 1.8T intake manifold is the perfect addition to a lightly modified street build as well as high-horsepower builds with turbo upgrades!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModular 2pc. Design w\/ Removable Plenum\u2028\u003c\/li\u003e\n\u003cli\u003eRotatable Plenum Allows Driver-side or Passenger-Side Throttle Body Mounting\u2028\u003c\/li\u003e\n\u003cli\u003e1.85L Plenum Volume\u2028\u003c\/li\u003e\n\u003cli\u003eTapered High-Velocity Runners w\/ Raised Velocity Stack Entries\u2028\u003c\/li\u003e\n\u003cli\u003eGenerously Cast Runner Walls for Porting\u2028\u003c\/li\u003e\n\u003cli\u003e72mm Throttle Body Opening\u2028\u003c\/li\u003e\n\u003cli\u003eLightweight 356 Aluminum Alloy Construction\u2028\u003c\/li\u003e\n\u003cli\u003eLarge Port Configuration\u003c\/li\u003e\n\u003cli\u003eHi-Grade Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eThermal Gasket Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"product-tabs\" class=\"overview\"\u003e\n\u003cdiv id=\"chldsec\" class=\"overview_content_inner tabs-panels\"\u003e\n\u003cdiv id=\"chsp_4\" class=\"panel\"\u003e\n\u003cp\u003eVehicle Fits:\u003cbr\u003e1996 - 2003 Audi A3\/S3 (8L) - 1.8T (180HP \u0026amp; 225HP)\u003cbr\u003e1998 - 2006 Audi TT (8N) - 1.8T (180HP \u0026amp; 225HP)\u003cbr\u003e1999 - 2005 Volkswagen Golf \/ GLI \/ GTI \/ Jetta \/ New Beetle (MKIV) - 1.8T\u003c\/p\u003e\n\u003cp\u003eAvailable Options:\u003cbr\u003e• Large Port Manifold\u003cbr\u003e• Grams 70mm DBW Throttle Body - Requires Modified Throttle Body Hose\u003c\/p\u003e\n\u003cp\u003eUS Patent No.: D673,978\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Grams Performance","offers":[{"title":"Default Title","offer_id":32599664459875,"sku":"grpG07-09-0210","price":1339.12,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/g07-09-0205_gp_03_1_1.png?v=1590668389"},{"product_id":"grams-performance-intake-manifold-vw-mkiv-1-8t-small-port","title":"Grams Performance Intake Manifold - VW MKIV 1.8T - Small Port","description":"\u003cp\u003eThe Grams Performance \u0026amp; Design Modular High Performance Intake Manifold for the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eVW MKIV 1.8T\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ehas arrived!\u003c\/p\u003e\n\u003cp\u003eOur unique two-piece modular intake manifold has been designed to be a bolt-on replacement for the anemic OEM unit, incorporating a removable plenum lid that not only allows for easy disassembly, porting, and plenum volume changes but can also be rotated to position the throttle body on either the driver or passenger side of the engine bay. \u2028\u003c\/p\u003e\n\u003cp\u003eThe Grams Performance \u0026amp; Design 1.8T intake manifold is the perfect addition to a lightly modified street build as well as high-horsepower builds with turbo upgrades!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures:\u2028\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModular 2pc. Design w\/ Removable Plenum\u2028\u003c\/li\u003e\n\u003cli\u003eRotatable Plenum Allows Driver-side or Passenger-Side Throttle Body Mounting\u2028\u003c\/li\u003e\n\u003cli\u003e1.85L Plenum Volume\u2028\u003c\/li\u003e\n\u003cli\u003eTapered High-Velocity Runners w\/ Raised Velocity Stack Entries\u2028\u003c\/li\u003e\n\u003cli\u003eGenerously Cast Runner Walls for Porting\u2028\u003c\/li\u003e\n\u003cli\u003e72mm Throttle Body Opening\u2028\u003c\/li\u003e\n\u003cli\u003eLightweight 356 Aluminum Alloy Construction\u2028\u003c\/li\u003e\n\u003cli\u003eSmall Port Configuration\u003c\/li\u003e\n\u003cli\u003eHi-Grade Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eThermal Gasket Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVehicle Fits:\u003cbr\u003e1996 - 2003 Audi A3\/S3 (8L) - 1.8T (180HP \u0026amp; 225HP)\u003cbr\u003e1998 - 2006 Audi TT (8N) - 1.8T (180HP \u0026amp; 225HP)\u003cbr\u003e1999 - 2005 Volkswagen Golf \/ GLI \/ GTI \/ Jetta \/ New Beetle (MKIV) - 1.8T\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003eAvailable Options:\u003cbr\u003e• Small Port Manifold\u003cbr\u003e• Grams 70mm DBW Throttle Body - Requires Modified Throttle Body Hose\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003eUS Patent No.: D673,978\u003c\/p\u003e","brand":"Grams Performance","offers":[{"title":"Default Title","offer_id":32599745921123,"sku":"grpG07-09-0205","price":1339.12,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/g07-09-0205_gp_03_1.png?v=1590668426"},{"product_id":"grams-performance-intake-manifold-vw-mkiv-1-8t-powder-coated-black-small-port","title":"Grams Performance Intake Manifold - VW MKIV 1.8T Powder Coated Black - Small Port","description":"\u003cp\u003eThe Grams Performance \u0026amp; Design Modular High Performance Intake Manifold for the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eVW MKIV 1.8T\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ehas arrived!\u003c\/p\u003e\n\u003cp\u003eOur unique two-piece modular intake manifold has been designed to be a bolt-on replacement for the anemic OEM unit, incorporating a removable plenum lid that not only allows for easy disassembly, porting, and plenum volume changes but can also be rotated to position the throttle body on either the driver or passenger side of the engine bay. \u2028\u003c\/p\u003e\n\u003cp\u003e The Grams Performance \u0026amp; Design 1.8T intake manifold is the perfect addition to a lightly modified street build as well as high-horsepower builds with turbo upgrades!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures:\u2028\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModular 2pc. Design w\/ Removable Plenum\u2028\u003c\/li\u003e\n\u003cli\u003eRotatable Plenum Allows Driver-side or Passenger-Side Throttle Body Mounting\u2028\u003c\/li\u003e\n\u003cli\u003e1.85L Plenum Volume\u2028\u003c\/li\u003e\n\u003cli\u003eTapered High-Velocity Runners w\/ Raised Velocity Stack Entries\u2028\u003c\/li\u003e\n\u003cli\u003eGenerously Cast Runner Walls for Porting\u2028\u003c\/li\u003e\n\u003cli\u003e72mm Throttle Body Opening\u2028\u003c\/li\u003e\n\u003cli\u003eLightweight 356 Aluminum Alloy Construction\u2028\u003c\/li\u003e\n\u003cli\u003eSmall Port Configuration\u003c\/li\u003e\n\u003cli\u003eHi-Grade Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eThermal Gasket Included\u003c\/li\u003e\n\u003cli\u003ePowder Coated Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVehicle Fits:\u003cbr\u003e1996 - 2003 Audi A3\/S3 (8L) - 1.8T (180HP \u0026amp; 225HP)\u003cbr\u003e1998 - 2006 Audi TT (8N) - 1.8T (180HP \u0026amp; 225HP)\u003cbr\u003e1999 - 2005 Volkswagen Golf \/ GLI \/ GTI \/ Jetta \/ New Beetle (MKIV) - 1.8T\u003c\/p\u003e\n\u003cp\u003eAvailable Options:\u003cbr\u003e• Small Port Manifold\u003cbr\u003e• Grams 70mm DBW Throttle Body - Requires Modified Throttle Body Hose\u003c\/p\u003e\n\u003cp\u003eUS Patent No.: D673,978\u003c\/p\u003e\n\u003cbr\u003e","brand":"Grams Performance","offers":[{"title":"Default Title","offer_id":32599782948963,"sku":"grpG07-09-0255","price":1451.78,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/g07-09-0255_gp_01.png?v=1590668458"},{"product_id":"grams-performance-vw-mkiv-1-8t-manifold-hardware-kit-big-port","title":"Grams Performance VW MKIV 1.8T Manifold Hardware Kit - Big Port","description":"\u003cp\u003eWhether you took your manifold apart, stripped out a bolt, ripped a gasket or simply lost a fitting, this complete hardware kit includes everything that came with your Grams Performance \u0026amp; Design VW MKIV Manifold when new. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(3) Screw Hex Socket M10x1.0x8.5mm\u003c\/li\u003e\n\u003cli\u003e(2) BARB Fitting, 8mm\u003c\/li\u003e\n\u003cli\u003e(2) BARB Fitting, 4mm\u003c\/li\u003e\n\u003cli\u003e(1) BARB Fitting, 12mm\u003c\/li\u003e\n\u003cli\u003e(8) Copper Washer\u003c\/li\u003e\n\u003cli\u003e(1) Intake Manifold Gasket\u003c\/li\u003e\n\u003cli\u003e(1) Thermal Manifold Gasket\u003c\/li\u003e\n\u003cli\u003e(4) VW\/Audi Fuel Injector Inserts\u003c\/li\u003e\n\u003cli\u003e(10) Bolt. M6x1.0x20mm\u003c\/li\u003e\n\u003cli\u003e(1) Grams Performance \u0026amp; Design Badge\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grams Performance","offers":[{"title":"Default Title","offer_id":32604686680163,"sku":"grp907-09-0210","price":209.85,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/907-09-0205_gp_01_1.png?v=1590728823"},{"product_id":"grams-performance-vw-mkiv-1-8t-manifold-hardware-kit-small-port","title":"Grams Performance VW MKIV 1.8T Manifold Hardware Kit - Small Port","description":"\u003cp\u003eWhether you took your manifold apart, stripped out a bolt, ripped a gasket or simply lost a fitting, this complete hardware kit includes everything that came with your Grams Performance \u0026amp; Design VW MKIV Manifold when new. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(3) Screw Hex Socket M10x1.0x8.5mm\u003c\/li\u003e\n\u003cli\u003e(2) BARB Fitting, 8mm\u003c\/li\u003e\n\u003cli\u003e(2) BARB Fitting, 4mm\u003c\/li\u003e\n\u003cli\u003e(1) BARB Fitting, 12mm\u003c\/li\u003e\n\u003cli\u003e(8) Copper Washer\u003c\/li\u003e\n\u003cli\u003e(1) Intake Manifold Gasket\u003c\/li\u003e\n\u003cli\u003e(1) Thermal Manifold Gasket\u003c\/li\u003e\n\u003cli\u003e(4) VW\/Audi Fuel Injector Inserts\u003c\/li\u003e\n\u003cli\u003e(10) Bolt. M6x1.0x20mm\u003c\/li\u003e\n\u003cli\u003e(1) Grams Performance \u0026amp; Design Badge\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grams Performance","offers":[{"title":"Default Title","offer_id":32604692938851,"sku":"grp907-09-0205","price":209.85,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/907-09-0205_1.png?v=1590728855"},{"product_id":"corksport-vacuum-boost-distribution-block","title":"CorkSport Vacuum\/Boost Distribution Block","description":"\u003cp\u003e\u003cspan\u003eThe CorkSport Vacuum Block enables you to organize your vacuum\/boost sources to improve the look of that engine bay. At just over ½ the size of a credit card, the CS distribution block fits just about anywhere so you can decide just how you want to route your vacuum lines. Say goodbye to having to tee into your existing lines for boost gauges, aux fueling controllers, or other add-ons and simply use one of the 7 ports of the CS vacuum block.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eFitment Inspired:\u003c\/h3\u003e\n\u003cdiv class=\"product_body\"\u003e\n\u003cp\u003e\u003cspan\u003eThe CorkSport Vacuum Block was designed to maximize the number of ports while remaining very small. Final dimensions are 3.56”x1.25”x0.63”, with the main body being shorter at 2.56”. This is just over ½ of a credit card, or about the size of most key fobs. Combining the small size with the end mounting location gives freedom to mount just about anywhere that uses an M8 or smaller bolt\/stud.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product_body\"\u003e\n\u003ch3\u003eFunctionality Focused:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eApplying a single vacuum\/boost source to the CS vacuum block will supply six other vaccum\/boost references. This means your BPV, boost gauge, and aux fuel controller lines all can start from the same location without the need for tees or splices.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product_body\"\u003e\n\u003ch3\u003eBuild it Your Way:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe seven ports of the CS vacuum block are all 1\/8-27 NPT thread size. This is a very common and reliable size for barb, push to connect, and even AN adapter fittings so you can decide what setup works best for your car and be confident you won’t have boost or vacuum leaks. In addition, spacing of the side ports is intentionally varied to give extra clearance for large 90° fittings. We offer two kits, one with plugs only, and another with a variety of barb and push to connect fittings.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eMaterials and Manufacturing:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe CS vacuum block is precision machined from 6061-T6 aluminum to ensure lasting strength and reliability. After machining, we anodize it black for corrosion resistance and finally laser etch a CS logo for a subtle detail to enhance your engine bay.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eGeneral Application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned in America:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein Vancouver, Washington, in the Pacific Northwest.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorkSport Service \u0026amp; Support:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2 year limited warranty, full color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"CorkSport","offers":[{"title":"Body + 4 Plugs","offer_id":32691825573987,"sku":"GEN-6-533-10","price":106.35,"currency_code":"NZD","in_stock":true},{"title":"Body + Plugs \u0026 Fittings","offer_id":32691825606755,"sku":"GEN-6-533-11","price":148.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/GEN-6-533-10_3.jpg?v=1591159393"}],"url":"https:\/\/www.speedscience.co.nz\/collections\/intake-manifolds.oembed?page=4","provider":"Speed Science","version":"1.0","type":"link"}