{"title":"Honda B18C \/ B18CR","description":"","products":[{"product_id":"grams-performance-1000cc-injectors-b-d-h-f-series","title":"Grams Performance 1000cc Injectors - B\/D\/H\/F Series","description":"\u003cp\u003eGrams Performance offers innovative, high-performance fuel injectors for today's vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch¨ injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eGrams Performance 1000cc fuel injectors are chosen by professional motorsports and performance enthusiasts because of their quality, consistency, value, and ease of use. They were designed primarily to be used with gasoline based fuels, however, may be used with alcohol based fuels with the understanding that the fuel system must be regularly flushed out and stored with gasoline to minimize flow losses associated with the use of alcohol on a consistent basis.c\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES \u0026amp; BENEFITS:\u003c\/strong\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with all known fuels including gasoline, methanol, and ethanol\u003c\/li\u003e\n\u003cli\u003eFlowed and balanced to within 1% for consistency\u003c\/li\u003e\n\u003cli\u003ePrecise fuel metering up to 118 psi (8 bar)\u003c\/li\u003e\n\u003cli\u003ePressure tested up to 220 psi (15.16 bar)\u003c\/li\u003e\n\u003cli\u003eLightweight valve needle and ultra-fast solenoid\u003c\/li\u003e\n\u003cli\u003eImproved atomization for greater combustion efficiency and reduced emissions\u003c\/li\u003e\n\u003cli\u003eLeak-free operation and optimal performance\u003c\/li\u003e\n\u003cli\u003eHigh-impedance design (no resistor box required)\u003c\/li\u003e\n\u003cli\u003eOver-molded one-piece design for added reliability and simplicity.\u003c\/li\u003e\n\u003cli\u003eMade from Bosch¨ EV14 Standard housing\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement\u003c\/li\u003e\n\u003cli\u003eComes with injector latency data to accurately set up aftermarket ECU\u003c\/li\u003e\n\u003cli\u003eEV6-USCAR electrical connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grams Performance","offers":[{"title":"Default Title","offer_id":29175286923363,"sku":"grpG2-1000-0500","price":1023.76,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/G20-05-1710_1.jpg?v=1569190298"},{"product_id":"arp-pressure-plate-bolts-b-series","title":"ARP Pressure Plate Bolts - B\/K Series","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003eThe importance of pressure plate bolts in a racing or hi-performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length.\u003c\/p\u003e\n\u003cp\u003eARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 psi. The Pro Series bolts, originally developed for NASCAR Winston Cup competition, are stronger and rated at 200,000 psi. Both models feature a large diameter, low-profile design. Complete with washers.\u003c\/p\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":29175289938019,"sku":"ARP108-2202","price":62.04,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/ARP108-2202_1.jpg?v=1582164599"},{"product_id":"acl-main-bearing-set-b-k-series","title":"ACL Main Bearing Set - Honda B \u0026 K Series","description":"\u003cp\u003eACL Race Series performance engine bearings are recognized as a premier brand throughout the motorsports world. Race Series rod and main bearings are standard components in race engines that have set records and won championships from Mexico to Bonneville - from sport compact drift racing to small block NASCAR, IHRA and NHRA competitions. The unique combination of design, metallurgy and engineering provides Race Series performance bearings with the endurance and capability to perform where others cannot. These exceptional bearings are available for a variety of American, Asian and European performance engines.\u003cbr\u003e\u003c\/p\u003e","brand":"ACL","offers":[{"title":"Standard","offer_id":29175292624995,"sku":"ACL5M1959H-STD","price":216.91,"currency_code":"NZD","in_stock":true},{"title":".001 Extra Clearance","offer_id":39530788749411,"sku":"ACL5M1959HX-STD","price":216.91,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/ACL5M1959HX-STD_1.jpg?v=1580787092"},{"product_id":"gates-racing-cambelt-b16b-b18c","title":"Gates Racing Cambelt - B16B\/B18C","description":"\u003cp\u003e\u003cstrong\u003eGates Racing Cambelt -B16B\/B18C\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGates Racing High-Performance Timing Belts are incredibly strong, extremely heat resistant. Tough enough to take the worst pummeling your engine can dish out. No other belts help protect your engine and deliver high performance like Gates Racing High-Performance Timing Belts.\u003c\/p\u003e\n\u003cp\u003eYes, the colour gives you a hot custom look. But look deeper. Constructed of HNBR elastomeric composites, Gates Racing High-Performance Timing Belts are 300% stronger than stock belts and deliver up to three times the heat resistance. You can count on them to hold up to the rigors of high horsepower, even with interference engines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWear Resistant Teeth. High saturation HNBR elastomeric composites contribute to the exceptional durability and heat resistance with aramid reinforcement.\u003c\/li\u003e\n\u003cli\u003eRobust Reinforced Tooth Jacket. Durable nylon fiber provides extra wear resistance, doubling tooth strength.\u003c\/li\u003e\n\u003cli\u003eSuper Strong Tensile Cord. Added strength comes from premium, high-strength glass cords.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Gates","offers":[{"title":"Default Title","offer_id":29175292657763,"sku":"GATT247RB","price":344.71,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Untitled-1_e5ce27c6-b433-4d28-ab2d-e0d5b7a66bfa.png?v=1600043413"},{"product_id":"k-n-panel-filter-dc2","title":"K\u0026N Panel Filter - DC2","description":"\u003cp\u003e\u003cstrong\u003eK\u0026amp;N Panel Filter - DC2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill fit any B Series powered Integra 93-00\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eK\u0026amp;N Replacement High-Flow Air Filters are The Original High-Flow Air Filter. They flow well and they filter well - that's it. End of Story!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Air Flow with Excellent Filtration\u003c\/li\u003e\n\u003cli\u003eDesigned to Increase Horsepower and Acceleration\u003c\/li\u003e\n\u003cli\u003eWashable and Reusable\u003c\/li\u003e\n\u003cli\u003eWill NOT Void Vehicle Warranty\u003c\/li\u003e\n\u003cli\u003eLasts up to 50,000km before cleaning is required depending on driving conditions\u003c\/li\u003e\n\u003cli\u003eK\u0026amp;N Million Mile Limited Warranty\u003c\/li\u003e\n\u003cli\u003eEconomical, a K\u0026amp;N Air Filter Will Last the Life of Your Automobile\u003c\/li\u003e\n\u003cli\u003eWorks with Original Equipment Manufacturer Vehicle Electronics\u003c\/li\u003e\n\u003cli\u003eEasy High-Performance Add-on\u003c\/li\u003e\n\u003cli\u003eEnvironmentally Friendly\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K\u0026N","offers":[{"title":"Default Title","offer_id":29175293116515,"sku":"KNE-2427","price":476.88,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/K_NE-2427_1.jpg?v=1580793769"},{"product_id":"skunk2-pro-series-cam-gears-b-series-h23a","title":"Skunk2 Pro Series Cam Gears - B Series\/H23A","description":"\n\u003cp\u003eAn engine's camshafts must be set at their proper positions relative to the crankshaft in order to maximize horsepower. Black Series Pro Series Cam Gears for Honda's B-series and H23A1 engines enable serious tuners to optimize horsepower and torque by being able to adjust camshaft timing +\/- 10 degrees, in one-degree increments, allowing them to tailor the power curve appropriately.\u003c\/p\u003e\n\u003cp\u003eThanks to laser-etched timing and directional marks, precise camshaft adjustments can be made quickly and easily. Pro Series Cam Gears feature precision-machined, hard-anodized teeth to reduce premature wear with a signature, six-bolt design that eliminates gear slipping. Skunk2's lightweight design (35 percent lighter than OEM) and CNC-machined, 7075-T6 billet aluminium construction reduces rotational inertia, resulting in increased engine response and acceleration. Skunk2's adjustable cam gears have also been proven on race cars in the most extreme conditions for more than a decade.\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Hard","offer_id":29175293444195,"sku":"skk304-05-5202","price":646.23,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":29175293476963,"sku":"skk304-05-5205","price":646.23,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/304-05-5202_1.jpg?v=1569190299"},{"product_id":"skunk2-viton-valve-stem-seals-b-d-h-k-series","title":"Skunk2 Viton Valve Stem Seals - B\/D\/H\/K Series","description":"\u003cp\u003eSkunk2s Viton Valve Stem Seals for popular Honda engines are designed to provide exceptional lubrication while keeping oil out of the combustion chamber. Only Viton is able to provide precise oil control and maximum durability, even at high rpm. Unlike OEM Honda valve stem seals that use different materials for both intake and exhaust seals, all Skunk2 seals exceed OEM specifications and are manufactured from high-quality Viton. Each seal also features stiffer retaining springs for a precise fit. The results are a seal that's resistant to extreme heat, oil additives, and abrasion.\u003c\/p\u003e\n\u003cp\u003eHigh-quality valve stem seals are vital to an engine's performance and longevity. Skunk2s Viton Valve Stem Seals ensure that each valve stem remains properly lubricated without allowing oil into the combustion chamber.\u003c\/p\u003e\n\u003cp\u003eFits B-series VTEC, H-series VTEC, K-series, D-series, and F-series (S2000) engines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot compatible with non-VTEC engines.\u003c\/p\u003e\n\u003cp\u003eSold in a set of 16\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175293509731,"sku":"skk312-05-0100","price":74.57,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/312-05-0100_1.jpg?v=1569190299"},{"product_id":"skunk2-lost-motion-assembly-b-series","title":"Skunk2 Lost Motion Assembly - B\/H Series","description":"\u003cp\u003eSkunk2 Racing High-Lift Lost Motion Assembly (LMA) Kits for the Honda B and H Series VTEC engines are direct replacements for factory lost motion assemblies. The function of the LMA is to keep the center VTEC rocker in the proper position when it is not engaged, and to provide additional spring force to control the added weight off the rocker assembly when it is engaged. \u003c\/p\u003e\n\u003cp\u003eWhen using high lift camshafts, Factory LMAs may bind and wear down the VTEC lobe. To counter this, Skunk2 Racing designed a spring style High-Lift LMA designed with more travel to accommodate high lift camshafts. \u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect Replacement for OE\u003c\/li\u003e\n\u003cli\u003eSpring Designed for Extended Travel\u003c\/li\u003e\n\u003cli\u003eRecommend for ALL High-Lift VTEC Camshafts\u003c\/li\u003e\n\u003cli\u003eHardened Tips for Longevity and Durability\u003c\/li\u003e\n\u003cli\u003eFits all B and H Series VTEC Cylinder Heads\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175293739107,"sku":"skk312-05-0200","price":233.49,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/312-05-0200_1.jpg?v=1569190299"},{"product_id":"skunk2-alpha-valve-springs-retainers-kit-b-series","title":"Skunk2 Alpha Valve Springs \u0026 Retainers Kit - B Series","description":"\u003cp\u003e\u003cstrong\u003eSkunk2 Alpha Valve Springs \u0026amp; Retainers Kit - B Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSkunk2 is proud to introduce its Alpha Valve Spring and Titanium Retainer Kit for Honda’s B-series VTEC engines. Each kit includes Skunk2’s high-quality dual valve springs and race-proven titanium retainers that are the result of nearly two decades of racing and engine building experience.\u003c\/p\u003e\n\u003cp\u003eEach Alpha Valve Spring is manufactured exclusively from super-clean, chrome-silicone wire milled in Japan. By using inner and outer springs mated together through a slight interference fit and with differing frequencies, Alpha Valve Springs are able to prevent valve float and maintain valvetrain stability at engine speeds in excess of 10,000 rpm.\u003c\/p\u003e\n\u003cp\u003eSkunk2’s industry-leading Alpha Titanium Retainers are designed to significantly reduce valvetrain mass, resulting in more horsepower and improved valvetrain stability. Similar to Skunk2’s already popular Pro Series Titanium Retainers, Alpha Titanium Retainers feature radius-cut edges for additional rocker arm clearance and reduced weight, strategically positioned lightening grooves, and reduced overall heights for better valve seal clearance and even further weight reduction.\u003c\/p\u003e\n\u003cp\u003eAlpha Titanium Retainers are manufactured using the latest 3D CAD (Computer Aided Design) and FEA (Finite Element Analysis) to ensure that each is optimized for strength as well as for reduced weight. Skunk2 engineers then test and prove their designs on the engine dyno as well as the race track. Once approved for manufacturing, only medical-grade titanium that’s been ultrasonically inspected and certified is used. Following CNC machining, each retainer is then individually inspected to ensure proper hole diameter, taper, and that each are free from machining defects to ensure proper installed valve spring heights and pressures. Finally, each retainer is serialized for your protection, including valuable information, like material batch specifics as well as production and inspection dates.\u003c\/p\u003e\n\u003cp\u003eSkunk2 designs, develops, and tests its entire valvetrain lineup in-house to ensure superior quality and maximum performance gains. During development, each valvetrain component is tested both on the dyno and the road, including 11,000 rpm drag racing engines and 17,000 rpm superbikes. Manufactured from the best materials available, Skunk2 valvetrain components provide exceptional performance, reliability, and quality and remain standard-issue on each Skunk2 vehicle that we build and support.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeat Pressure: 68 lbs at 1.320”\u003c\/li\u003e\n\u003cli\u003eOpen Pressure: 210 lbs at 0.820”\u003c\/li\u003e\n\u003cli\u003eCoil Bind: 0.800”\u003c\/li\u003e\n\u003cli\u003eNot compatible with Pro Series Camshafts.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175293771875,"sku":"skk344-05-1300","price":919.61,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/344-05-1300_1.jpg?v=1569190299"},{"product_id":"skunk2-alpha-alloy-radiator-honda-civic-92-00","title":"Skunk2 Alpha Alloy Radiator - EG\/Ek Half Size","description":"\u003cp\u003eSkunk2's all-aluminium, half-size Alpha Series Radiator for the 92-00' Civic is a direct-fit upgrade designed to dramatically increase both cooling efficiency and engine performance. Alpha Series Radiators are manufactured from lightweight and durable aluminum, feature 100-percent brazed cores, and include polished end tanks with Skunk2's signature Alpha logo embossed along each side. Each Alpha Series Radiator features a dual-core design, high-efficiency fins for maximum cooling capabilities, and includes a genuine Skunk2 Radiator Cap for maximum performance and a premium appearance. Each Alpha Series Radiator also includes provisions for the OEM cooling fan and larger \u003cstrong\u003e1.25-inch inlets and outlets (B\/H\/K Series)\u003c\/strong\u003e, which makes it ideal for most engine swaps that utilize larger radiator hoses.\u003c\/p\u003e\n\u003cp\u003eSkunk2's commitment to producing high-quality components means that each Alpha Series Radiator meets or exceeds original equipment manufacturer standards, that each radiator may be installed without modification to the vehicle, and is compatible with OEM hoses, cooling fans, and shrouds. (Note: Some engine swap applications may require custom radiator hoses and\/or cooling fans.)\u003c\/p\u003e\n\u003cp\u003eSkunk2's Alpha Series Radiators are the perfect addition to any high-performance vehicle and are designed for the street, the track, or even OEM replacement purposes. Alpha Series Radiators are built to withstand harsh elements as well as against years of under-hood heat cycling. Each Alpha Series Radiator adheres to strict quality control standards and careful packaging, resulting in tubes and fins capable of optimal flow and efficient heat transfer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual-core design.\u003c\/li\u003e\n\u003cli\u003eIncludes Skunk2 Radiator Cap.\u003c\/li\u003e\n\u003cli\u003eFeatures 1.25-inch inlet and outlet - suit b series v-tec\u003c\/li\u003e\n\u003cli\u003eNot compatible with automatic transmission cooling system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Also suitable for DC2\/Orthia\/SJ Integra\/Domani MB4\/5 and many other configurations with custom mounting\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175295180899,"sku":"skk349-05-2000","price":485.6,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/349-05-2000_81.jpg?v=1569190299"},{"product_id":"skunk2-alpha-alloy-radiator-honda-integra-93-00","title":"Skunk2 Alpha Alloy Radiator - Integra 93-00","description":"\n\u003cp\u003eSkunk2's all-aluminum, full-size Alpha Series Radiator for the Dc2 Integra is a direct-fit upgrade designed to dramatically increase both cooling efficiency and engine performance. Alpha Series Radiators are manufactured from lightweight and durable aluminum, feature 100-percent brazed cores, and include polished end tanks with Skunk2's signature Alpha logo embossed along each side. Each Alpha Series Radiator features a dual-core design, high-efficiency fins for maximum cooling capabilities, and includes a genuine Skunk2 Radiator Cap for maximum performance and a premium appearance. Each Alpha Series Radiator also includes provisions for the OEM cooling fan and OEM-compatible, \u003cstrong\u003e1.25-inch inlets and outlets (B\/H\/K Series)\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eSkunk2's commitment to producing high-quality \u003cspan id=\"\" class=\"\"\u003ecomponents means that each Alpha Series Radiator meets or exceeds original equipment manufacturer standards, that each radiator may be installed without modification to the vehicle, and is compatible with OEM hoses, cooling fans, and shrouds. (Note: Some engine swap applications may require custom radiator hoses and\/or cooling fans.)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSkunk2's Alpha Series Radiators are the perfect addition to any high-performance vehicle and are designed for the street, the track, or even OEM replacement purposes. Alpha Series Radiators are built to withstand harsh elements as well as against years of under-hood heat cycling. Each Alpha Series Radiator adheres to strict quality control standards and careful packaging, resulting in tubes and fins capable of optimal flow and efficient heat transfer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual-core design.\u003c\/li\u003e\n\u003cli\u003eIncludes Skunk2 Radiator Cap.\u003c\/li\u003e\n\u003cli\u003eFeatures 1.25-inch inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eNot compatible with automatic transmission cooling system.\u003c\/li\u003e\n\u003cli\u003eNot compatible with OEM air conditioning fan.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175295279203,"sku":"skk349-05-1000","price":541.98,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/349-05-1000_1.jpg?v=1568634418"},{"product_id":"plm-power-driven-tri-y-header-b-series","title":"PLM Power Driven Tri-Y Header - B Series - BIG TUBE","description":"\u003cp\u003eThe best B series header design on the market, period. The Tri-Y design delivers extra power throughout the entire rev range. A hybrid of conventional 4-2-1 and 4-1 designs, it is the go-to header for all serious about making more power!\u003c\/p\u003eDesigned for high compression big cam 1800\/2000cc builds\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade of 304 Stainless steel\u003c\/li\u003e\n\u003cli\u003eOne year limited warranty\u003c\/li\u003e\n\u003cli\u003eShort tube Tri-Y header\u003c\/li\u003e\n\u003cli\u003eTrue 2.5\" collector\u003c\/li\u003e\n\u003cli\u003eMachined CNC'd manifold flange\u003c\/li\u003e\n\u003cli\u003eGaskets included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e Ground clearance is significantly reduced over other designs. If your car is very low, we suggest looking at the host of other options we have in stock - all of which have superior ground clearance.\u003c\/p\u003eThe angle of the section under the sump points downwards somewhat - usually som modification is required, esp on low cars.\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e As per usual, EF \u0026amp; DA owners will require aftermarket subframe\/traction bar setups.\u003c\/p\u003e","brand":"PLM","offers":[{"title":"Default Title","offer_id":29175300685923,"sku":"PLM-HB20-HEADER","price":1053.11,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/PLM-HB18-HEADER-2T.jpg?v=1582164667"},{"product_id":"moroso-baffled-sump-5-5-quart-capacity-w-trap-doors-b-series","title":"Moroso Baffled Sump 5.5 Quart Capacity W' Trap Doors - B Series","description":"","brand":"Moroso","offers":[{"title":"Default Title","offer_id":29175303962723,"sku":"20910","price":931.82,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/files\/20910_black_web.jpg?v=1749175549"},{"product_id":"plm-adjustable-shifter-b-d-series","title":"PLM Adjustable Shifter B\/D Series","description":"\n\n\u003cp\u003eThe Private Label Mfg Fully Adjustable shifter is constructed with high quality alloy steel for maximum durability and reliability to ensure the shifter will last. The added weight of the shifter results in smoother and more positive shifting with the ergonomic design that just falls into your hands, to the very first ultra-smooth shift.\u003c\/p\u003e\n\u003cp\u003eThe shifter was designed to have an adjustable ratio as the stock shifter to an more aggressive feel. The shifter is fully height adjustable to accommodate each drivers desired position, as every driver is different. The shifter certainly does not look stock, but the shift feel and throw can be adjusted like the stock shifter. Each short shifter features a non-binding sealed bearing and a low friction coating that ensures smooth and precise shifting, even under the harshest driving conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-part design for easier installation\u003c\/li\u003e\n\u003cli\u003eFits any Honda\/Acura thread-pitch knob\u003c\/li\u003e\n\u003cli\u003eAdjustable handle compensates for small-diameter racing steering wheels\u003c\/li\u003e\n\u003cli\u003eRevised bushings for even smoother shifting\u003c\/li\u003e\n\u003cli\u003eStandard Honda\/Acura 10x1.5mm thread pitch and shift knob applications\u003c\/li\u003e\n\u003cli\u003eMade from high grade stainless steel \u0026amp; billet aluminium\u003c\/li\u003e\n\u003cli\u003eMachine spun stainless finish\u003c\/li\u003e\n\u003cli\u003eShift Knob not included\u003c\/li\u003e\n\u003cli\u003eAll necessary allen keys for adjusting included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLM","offers":[{"title":"Default Title","offer_id":29175305633891,"sku":"PLM-SHIFTER-B\/D","price":306.76,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/PLM-SHIFTER-B-D-2T.jpg?v=1582165761"},{"product_id":"plm-power-driven-ta-header-b-series","title":"PLM Power Driven TA Header - B Series","description":"\n\u003cp\u003ePrivate Label MFG Power Driven (TA) B-Series header features a true 4-2-1 merge collector for more equal exhaust flow. This header delivers the best peak horsepower gain while utilizing a one piece design. This is ideal for all forms of competition; Autocross, Drag racing and road racing.\u003c\/p\u003e\n\u003cp\u003e*Private label MFG recommends using our test pipes for an easier installation.\u003c\/p\u003e\n\u003cp\u003eRecommended for 1.6L-2.0L engine displacements\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade of Stainless steel\u003c\/li\u003e\n\u003cli\u003eOne year limited warranty\u003c\/li\u003e\n\u003cli\u003eShort tube Tri-Y header\u003c\/li\u003e\n\u003cli\u003eTrue 2.5\" collector\u003c\/li\u003e\n\u003cli\u003eMachined CNC-ed manifold flange\u003c\/li\u003e\n\u003cli\u003eFlange is .38\" which is just about 3\/8\" thick\u003c\/li\u003e\n\u003cli\u003e18G on the 304 S\/S. Measured at .049\" to .050\"\u003c\/li\u003e\n\u003cli\u003eOne piece design\u003c\/li\u003e\n\u003cli\u003eGaskets included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Will fit EF\/DA chassis with minimal subframe modification - less so than Tri-y and other designs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned for maximum ground clearance whilst still providing a fantastic increase in torque and performance. The go-to option for those whose car is lowered by 50mm or more.\u003c\/strong\u003e\u003c\/p\u003e","brand":"PLM","offers":[{"title":"Default Title","offer_id":29175309434979,"sku":"PLM-HB18-TA-HEADER","price":1044.1,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Untitled-4.png?v=1588306940"},{"product_id":"ngk-ignition-leads-b-series","title":"NGK Ignition Leads - B Series B16A\/B18C Vtec","description":"\n\u003cp\u003eHigh quality OEM quality replacement leads.\u003c\/p\u003e\n\u003cp\u003eLeads perish and degrade over time - to avoid ignition issues it is recommended you replace your leads when any visible signs of wear are detected.\u003c\/p\u003e\n\u003cp\u003eNote: V-Tec Engines Only\u003c\/p\u003e","brand":"NGK","offers":[{"title":"Default Title","offer_id":29175309893731,"sku":"HE64","price":187.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/HE64_1.jpg?v=1580787284"},{"product_id":"blox-racing-block-guard-b-series","title":"BLOX Racing Block Guard - Honda B Series 81mm","description":"\u003cp\u003eBLOX Racing Block Guard – B-series\u003c\/p\u003e\n\u003cp\u003eBLOX Racing engine block guards help strengthen and support the upper cylinders walls in open-deck Honda\/Acura engines.\u003c\/p\u003e\n\u003cp\u003eCNC-machined from AL6061, the BLOX Racing engine block guard also provides maximum coolant passage to the head minimizing the risk of head gasket failure and cracked cylinder sleeves.\u003c\/p\u003e\n\u003cp\u003eBLOX Racing billet block guards are necessary for forced-induction engine applications.\u003c\/p\u003e","brand":"BLOX Racing","offers":[{"title":"Default Title","offer_id":29175319953507,"sku":"BXPT-10200","price":287.91,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/BXPT-10200_1.jpg?v=1580874110"},{"product_id":"cometic-street-pro-head-gasket-set-b-series","title":"Cometic Street Pro Head Gasket Set - B Series","description":"\u003cp\u003eCometic Street Pro Head Gasket Set – B Series\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCometic Street Pro Head Gasket Set - B Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMaster head sets from the Cometic gurus out of the USA. They are a complete head rebuilt set with everything needed to freshen up your head as part of your engine rebuild or regular maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e81.5mm\u003c\/strong\u003e - Suits 81-81.5mm bore size - oem size\/rebuild\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e82mm\u003c\/strong\u003e - Suits 81.5-82mm bore size - rebuild\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e84.5mm\u003c\/strong\u003e - Suits B20 v-tec (or sleeved b16\/b18\/) oem\/rebuild\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e.030\"\u003c\/strong\u003e is the oem thickness head gasket and recommended for 99% of applications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHead Type - virtually the only difference between kits listed for B18C black top or B16a\/B18cR is the intake manifold gasket. In most cases this will likely have been replaced with an aftermarket heat shield type. We certainly recommend that! In any case, it doesn't really matter which kit you buy in this respect. They are virtually identical ;)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIndividual gaskets and gasket kits are available for both the Domestic and Import Automotive Markets. The Performance Gasket Line gives you options in: head gasket bore size and shape, gasket thickness, and custom water passages and pocket dimension solutions. Valve Cover and MLS Exhaust gaskets are also a part of the Performance Gasket Line.\u003c\/p\u003e\n\u003cp\u003eThe StreetPro Gasket Line is a product line of Cometic Gasket manufactured by Cometic. StreetPro is geared toward the street-rodder who is looking to purchase a kit with all necessary gaskets and seals needed for a rebuild. StreetPro gasket kits are sold as a top end and bottom end kits. Purchase both top- and bottom-end kits for a total engine rebuild. Quality gasket materials are a priority in StreetPro kits. Kits materials include: MLS, AFM, Aramid Fiber, and Armor Clad.\u003c\/p\u003e\n\u003cp\u003eModern lightweight engines are producing more horsepower, higher cylinder pressure, clamp load and extreme temperatures. Cometic is committed to provide innovative, quality gaskets while maximizing your engine?s power and performance. Cometic gaskets are proudly made in the U.S.A. with materials manufactured on American soil. Cometic Gasket, Inc., is an exclusive NASCAR Performance Product.\u003c\/p\u003e","brand":"Cometic","offers":[{"title":".030\" 81.5mm \/ B16\/B18CR","offer_id":29175323590755,"sku":"PRO2002T-815-030","price":494.7,"currency_code":"NZD","in_stock":true},{"title":".030\" 82mm \/ B16\/B18CR","offer_id":29175323656291,"sku":"PRO2002T-820-030","price":549.67,"currency_code":"NZD","in_stock":true},{"title":".030\" 81.5mm \/ B18C Black Top","offer_id":29175323557987,"sku":"PRO2003T-815-030","price":549.67,"currency_code":"NZD","in_stock":true},{"title":".030\" 82mm \/ B18C Black Top","offer_id":29175323623523,"sku":"PRO2003T-820-030","price":549.67,"currency_code":"NZD","in_stock":true},{"title":".030\" 84.5mm \/ B18C Black Top","offer_id":29175323689059,"sku":"PRO2049T-845-030","price":549.67,"currency_code":"NZD","in_stock":true},{"title":".030\" 84.5mm \/ B16\/B18CR","offer_id":29175323721827,"sku":"PRO2050T-845-030","price":494.7,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/F152325509.jpg?v=1582171270"},{"product_id":"skunk2-pro-xp-valve-springs-b-series","title":"Skunk2 Pro XP Valve Springs - B\/H Series","description":"\n\u003cp\u003eSkunk2 is proud to introduce its Pro Series XP (Extra Pressure) Racing Valve Spring Kits for the Honda B-series VTEC engines. Each kit includes Skunk2's high-quality race-proven dual valve springs that are the result of nearly two decades of racing and engine building experience.\u003c\/p\u003e\n\u003cp\u003ePRO XP features a higher seat pressure for turbocharged and extreme high RPM motors. This spring has a seat pressure of 93lbs @ 1.320 while keeping the coil bind height for higher lift camshafts.\u003c\/p\u003e\n\u003cp\u003eEach Pro Series XP Racing Valve Spring is manufactured exclusively from super-clean, chrome-silicone wire milled in Japan. By using inner and outer springs mated together through a slight interference fit and with differing frequencies, Pro Series XP Racing Valve Springs are able to \u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003eprevent valve float and maintain valvetrain stability at engine speeds in excess of 11,000 rpm. Wound by a premier North American winder, our Pro Series XP Racing Valve Springs retains its durability and strength that results in improvement to the extreme fatigue limit of the wire and enhanced resistance to load loss.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePro Series XP Racing Valve Springs are engineered to handle the demands of extreme-lift camshafts operating at prolonged, high-rpm use at championship-level racing. Skunk2's Pro Series XP Racing Valve Spring's for the Honda's B-series VTEC engines are simply the best on the market. Pro Series XP Racing Valve Springs have been tested at speeds exceeding 11,000 rpm on our engine dyno, street, and the race track. Our superior, Japanese-milled, super-clean chrome silicone wire is 100-percent eddy-current inspected prior to coiling. Next, they are heat-treated, shot-peened, and chemically polished for strength and durability. A special nitriding process concludes Skunk2's rigorous manufacturing process. The end result is a lightweight valve spring that safely accommodates high-lift camshafts and features superior resistance to load loss, even under extreme operating conditions.\u003c\/p\u003e\n\u003cp\u003eSkunk2 designs, develops, and tests its entire valvetrain lineup in-house to ensure superior quality and maximum performance gains. During development, each valvetrain component is tested both on the dyno and the road, including 11,000 rpm drag racing engines and 17,000 rpm superbikes. Manufactured from the best materials available, Skunk2 valvetrain components provide exceptional performance, reliability, and quality. These components remain standard-issue on each Skunk2 vehicle that we build and support.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeat Pressure: 93 lbs at 1.320\u003c\/li\u003e\n\u003cli\u003eOpen Pressure: 238 lbs at 0.820\u003c\/li\u003e\n\u003cli\u003eCoil Bind: 0.718\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175331356771,"sku":"skk311-05-7350","price":890.18,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/dsc_0003_11.jpg?v=1569190305"},{"product_id":"skunk2-alpha-radiator-ef-civic-crx-full-size","title":"Skunk2 Alpha Radiator - EF Civic\/CRX Full Size","description":"\n\u003cp\u003eSkunk2s all-aluminium, full-size Alpha Series Radiator for the 88-91 Civic\/CRX is a direct-fit upgrade designed to dramatically increase both cooling efficiency and engine performance. Alpha Series Radiators are manufactured from lightweight and durable aluminium, feature 100-percent brazed cores, and include polished end tanks with Skunk2's signature Alpha logo embossed along each side. Each Alpha Series Radiator features a dual-core design, high-efficiency fins for maximum cooling capabilities, and includes a genuine Skunk2 Radiator Cap for maximum performance and a premium appearance. Each Alpha Series Radiator also includes provisions for the OEM cooling fan and larger \u003cstrong\u003e1.25-inch inlets and outlets (B\/H\/K Series)\u003c\/strong\u003e, which makes it ideal for most engine swaps that utilize larger radiator hoses.\u003c\/p\u003e\n\u003cp\u003eSkunk2's commitment to producing high-quality components means that each Alpha Series Radiator meets or exceeds original equipment manufacturer standards, that each radiator may be installed without modification to the vehicle, and is compatible with OEM hoses, cooling fans, and shrouds. (Note: Some engine swap applications may require custom radiator hoses and\/or cooling fans.)\u003c\/p\u003e\n\u003cp\u003eSkunk2's Alpha Series Radiators are the perfect addition to any high-performance vehicle and are designed for the street, the track, or even OEM replacement purposes. Alpha Series Radiators are built to withstand harsh elements as well as against years of under-hood heat cycling. Each Alpha Series Radiator adheres to strict quality control standards and careful packaging, resulting in tubes and fins capable of optimal flow and efficient heat transfer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual-core design.\u003c\/li\u003e\n\u003cli\u003eIncludes Skunk2 Radiator Cap.\u003c\/li\u003e\n\u003cli\u003eFeatures 1.25-inch inlet and outlet (B\/H\/F\/K Series)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWill not fit ef8\/9 without subframe modification or traction bar fitted.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175331717219,"sku":"skk349-05-1500","price":541.98,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/alpha4.jpg?v=1569190305"},{"product_id":"cometic-head-gasket-b16-b18","title":"Cometic Head Gasket - B16\/B18","description":"\u003cp\u003e\u003cstrong\u003eCometic Head Gasket - B16\/B18\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eModern lightweight engines are producing more horsepower, higher cylinder pressure, clamp load and extreme temperatures. Cometic is committed to provide innovative, quality gaskets while maximizing your engine's power and performance. Cometic gaskets are proudly made in the U.S.A. with materials manufactured on American soil. Cometic Gasket, Inc., is an exclusive NASCAR Performance Product.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e .018 Thickness Compression Figures - Raise Compression\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eB16A \u003c\/b\u003e- Compression raised from 10.38:1 to 10.74:1\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eB16B \u003c\/b\u003e- Compression raised from 10.63:1 to 11.01:1\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eB18C \u003c\/b\u003e- Compression raised from 10.49:1 to 10.82:1\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eB18C ITR - \u003c\/b\u003eCompression raised from 11.20:1 to 11.57:1\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e .050 Thickness Compression Figures - Lower Compression\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eB16A \u003c\/b\u003e- Compression lowered from 10.38:1 to 9.81:1\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eB16B \u003c\/b\u003e- Compression lowered from 10.63:1 to 10.03:1\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eB18C \u003c\/b\u003e- Compression lowered from 10.49:1 to 10:1\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eB18C ITR - \u003c\/b\u003eCompression lowered from 11.20:1 to 10.60:1\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: 84mm and 85mm options suit sleeved b16\/b18 builds - NOT B20 blocks.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Cometic","offers":[{"title":"82mm - .030\" Oem Thickness","offer_id":39462572425315,"sku":"cgsC4168-030","price":261.69,"currency_code":"NZD","in_stock":true},{"title":"85mm - .030\" OEM Thickness","offer_id":29175334600803,"sku":"cgsC4182-030","price":261.69,"currency_code":"NZD","in_stock":true},{"title":"84mm - .030\" OEM Thickness","offer_id":29175334568035,"sku":"cgsC4188-030","price":261.69,"currency_code":"NZD","in_stock":true},{"title":"84mm - .040\" Lower Compression","offer_id":40731869347939,"sku":"cgsC4188-040","price":261.69,"currency_code":"NZD","in_stock":true},{"title":"81mm - .018\" Increase Compression","offer_id":29175334469731,"sku":"cgsC4231-018","price":261.69,"currency_code":"NZD","in_stock":true},{"title":"81mm - .030\" OEM Thickness","offer_id":29175334502499,"sku":"cgsC4231-030","price":261.69,"currency_code":"NZD","in_stock":true},{"title":"81mm - .051\" Lower Compression","offer_id":29175334535267,"sku":"cgsC4231-051","price":261.69,"currency_code":"NZD","in_stock":true},{"title":"81.5mm - .030\" OEM Thickness","offer_id":32902265045091,"sku":"cgsC4232-030","price":261.69,"currency_code":"NZD","in_stock":true},{"title":"81.5mm - .040\"","offer_id":32329278455907,"sku":"cgsC4232-040","price":261.69,"currency_code":"NZD","in_stock":true},{"title":"81.5mm - .051\" Lower Compression","offer_id":32328995569763,"sku":"cgsC4232-051","price":261.69,"currency_code":"NZD","in_stock":true},{"title":"81mm - .080\" Lower Compression","offer_id":39298788851811,"sku":"cgsC4232-080","price":261.69,"currency_code":"NZD","in_stock":true},{"title":"85mm - .051\" Lower Compression","offer_id":43677460562019,"sku":"cgsC4182-051","price":261.69,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/gaskets-cometic-mls-generic.jpg?v=1588391993"},{"product_id":"honda-genuine-front-crank-seals","title":"Honda Genuine Front Crank Seals","description":"\u003cp\u003eWorth the little bit extra - you don't want this leaking or you have to pull all that stuff off again!!\u003c\/p\u003e\n\u003cp\u003eNote - D series owners! there are 2 options both are the same, only that Honda have 2 different part numbers for the same seal.\u003c\/p\u003e\n\u003cp\u003eif unsure, dont hesitate to ask us! via email or call\u003c\/p\u003e","brand":"Honda Genuine Parts","offers":[{"title":"D Series (New Part Number)","offer_id":32976389898339,"sku":"91212-P01-003","price":35.85,"currency_code":"NZD","in_stock":true},{"title":"D Series (Original Part number)","offer_id":40371787530339,"sku":"91212-P7A-004","price":35.85,"currency_code":"NZD","in_stock":true},{"title":"H Series","offer_id":29175341744227,"sku":"91212-PAA-A01","price":35.85,"currency_code":"NZD","in_stock":true},{"title":"D17A","offer_id":43014118178915,"sku":"91212-PLC-003","price":35.85,"currency_code":"NZD","in_stock":true},{"title":"B Series","offer_id":29175341678691,"sku":"91212-PR3-003","price":35.85,"currency_code":"NZD","in_stock":true},{"title":"K Series","offer_id":29175341711459,"sku":"91212-RTA-003","price":40.17,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/91212-pr3-003-38x50x7.4-500x500.jpg?v=1580787532"},{"product_id":"simota-3-alloy-intake-pipe-kit-dc2-incl-wabs","title":"Simota 3\" Alloy Intake Pipe Kit - DC2 (incl w'ABS)","description":"\n\u003cp\u003eSimota are the original Honda intake pipe kit and pod filter manufacturer.  You’ll find their products on millions of cars worldwide – especially Hondas!\u003c\/p\u003e\n\u003cp\u003eGain power and most importantly VTAXXXXX SOUNDS with these intake pipe kits.\u003c\/p\u003e\n\u003cp\u003eSmoother internal flow and of course, the benefit of a high flow pod filter combine to increase power and torque throughout the rev range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll Simota intake pipe kits include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3″ polished alloy pipe\u003c\/li\u003e\n\u003cli\u003e3-2.5″ pipe to throttle body joiner\u003c\/li\u003e\n\u003cli\u003e3″ hose clamp\u003c\/li\u003e\n\u003cli\u003eAir filter mounting clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee related products for Simota and K\u0026amp;N air filter options.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e Will also fit EG, all DC model \u0026amp; EK (but will need provision for air temp sensor added)\u003cbr\u003e Cars with 70mm throttle bodies fitted will require a 3″-3″ pipe to throttle body joiner – available separately.\u003c\/p\u003e","brand":"Simota","offers":[{"title":"Default Title","offer_id":29175341809763,"sku":"BQI03-99110","price":152.35,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/IMG_7635.jpg?v=1580874454"},{"product_id":"skunk2-billet-wire-cover-b-series","title":"Skunk2 Billet Wire Cover - B VTEC - Polished","description":"\n\u003cp\u003eSkunk2's Fine Tuning products and accessories, like its Polished Billet Wire Covers for Honda's B-series VTEC engines, help put the finishing touches onto your vehicle you work so hard to make perform well.\u003c\/p\u003e\n\u003cp\u003eConsistent with Skunk2's racing heritage and high-performance parts manufacturing practices, each Polished Billet Wire Cover is precision CNC machined from high-quality, 6061 billet aluminium and features a durable, fully polished finish. Skunk2's Polished Billet Wire Covers are also compatible with your vehicle's OEM valve cover and feature a contrasting, acid-etched Skunk2 logo for the ultimate finishing touch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003cbr\u003e\u003c\/strong\u003eNot compatible with non-VTEC engines.\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":39608102223971,"sku":"skk632-05-2090","price":253.98,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/632-05-2090.jpg?v=1569190307"},{"product_id":"skunk2-rocker-cover-washer-set-b-series","title":"Skunk2 Rocker Cover Washer Set - B Series","description":"\n\u003cp\u003eSkunk2 is proud to introduce the most unique, low-profile dress-up hardware you've ever seen. An original design, Skunk2's Low Profile Valve Cover Hardware kits are the only ones designed specifically for B-series valve covers.\u003c\/p\u003e\n\u003cp\u003eLow Profile Valve Cover Hardware kits are a comprehensive design, featuring specially engineered standoffs, that include provisions for Skunk2's unique, low-profile washers and flush-mounted, stainless steel hardware. Each kit includes 12 low-profile washers and 12 flush-mounted, stainless steel bolts. All kits are compatible with OEM valve covers as well as OEM and most aftermarket spark plug wire covers, including those from Skunk2.\u003c\/p\u003e\n\u003cp\u003eEach OEM-grade standoff replaces the factory mounting studs, allowing for the camshaft caps to be secured to factory specifications. No other valve cover kit available does this. A series of Viton O-rings and the appropriate standoff extensions are included with each kit to ensure a leak-free seal and OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003eOnly Skunk2's 40-piece Low Profile Valve Cover Hardware kits include washers and standoffs for all eight mounting points as well as for fastening most spark plug wire covers into place. And only Skunk2 offers the most low-profile washers and bolts around, measuring more than 75% thinner than the factory washer and nut combination.\u003c\/p\u003e\n\u003cp\u003eSkunk2's Low Profile Valve Cover Hardware kits are manufactured from 6061-T6 aluminium and are available for B-series VTEC engines in black, blue, gold, purple, red, and clear hard-anodized finishes, and feature Skunk2's classic, laser-etched logo. Skunk2 employs the same design and manufacturing methods for all of its Fine Tuning accessories as it does for its top-of-the-line racing components. Skunk2's Low-Profile Valve Cover Hardware kits help put that unique finishing touch onto the vehicle you work so hard to make perform well, and we make every effort to ensure that their style is consistent with our rich racing heritage.\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Clear","offer_id":29175342137443,"sku":"skk649-05-0110","price":152.38,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":29175342170211,"sku":"skk649-05-0115","price":152.38,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/valvecovertest_3.jpg?v=1569190307"},{"product_id":"honda-genuine-spark-plug-tube-seals","title":"Honda Genuine Spark Plug Tube Seals","description":"\n\u003cp\u003eGot oil down in your spark plugs? These little seals are the culprit!\u003c\/p\u003e\n\u003cp\u003eD SERIES OWNERS! There is an oddball tube seal that pops up from time to time - please give us your chassis number and rego in the order notes so we can ensure you get the right seals!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold individually - 4 Required!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Honda Genuine Parts","offers":[{"title":"K Series","offer_id":29175342760035,"sku":"12342-PCX-004","price":18.02,"currency_code":"NZD","in_stock":true},{"title":"D15 \/ D16A(OBD1)","offer_id":32140182618211,"sku":"12342-PJ7-000","price":11.8,"currency_code":"NZD","in_stock":true},{"title":"F Series (SOHC)","offer_id":43192723964003,"sku":"12342-PT0-000","price":39.33,"currency_code":"NZD","in_stock":true},{"title":"B\/H (F Series DOHC) \u0026 DOHC ZC","offer_id":29175342694499,"sku":"12342-PT2-000","price":10.45,"currency_code":"NZD","in_stock":true},{"title":"D16Y\/Z","offer_id":29175342727267,"sku":"12342-RYE-004","price":9.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Screen-Shot-2018-09-13-at-9.21.45-AM.png?v=1580874504"},{"product_id":"skunk2-cam-seal-honda-b-h-f-series","title":"Skunk2 Cam Seal - B\/H\/F Series","description":"\n\u003cp\u003eSkunk2's Fine Tuning products and accessories, like its Cam Seal for Honda's B-series, H-series, and DOHC D-series engines, help put the finishing touches onto your vehicle you work so hard to make perform well. Consistent with Skunk2's racing heritage and high-performance parts manufacturing practices, each Cam Seal is precision CNC machined from high-quality, 6061 billet aluminium and features a durable, hard anodized finish.\u003c\/p\u003e\n\u003cp\u003eUnlike OEM cam seals, Skunk2 Cam Seals feature three o-rings for a positive seal and a precise fit. Each Cam Seal also features a laser-etched Skunk2 logo for the ultimate finishing touch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"product-note-intro\"\u003eNote:\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003eAluminium construction lasts virtually forever, unlike OEM rubber seals.\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Gunmetal","offer_id":29175342858339,"sku":"skk658-05-0200","price":77.38,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":31866065322083,"sku":"skk658-05-0205","price":77.38,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/00skunk2camseal_1024x1024_b4ba8cb5-d40e-4a60-a682-78279af9c328.jpg?v=1582166631"},{"product_id":"skunk2-ultra-race-intake-manifold-b-series","title":"Skunk2 Ultra Race Intake Manifold - B Series","description":"\n\u003cp\u003eThe engineers at Skunk2 Racing have worked tirelessly to develop the next generation of high performance intake manifolds and are proud to announce the release of the much anticipated Ultra Series Intake Manifold. \u003cstrong\u003eYears of R\u0026amp;D\u003c\/strong\u003e have culminated in a multi-piece cast aluminium intake manifold that offers advantages that only a modular design could allow.\u003c\/p\u003e\n\u003cp\u003eBuilding upon the performance legacy of our Pro Series Intake Manifold, as well as using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a three-piece modular design that \u003cstrong\u003eallows for easy disassembly, porting, and plenum volume changes\u003c\/strong\u003e through the use of a removable plenum and optional plenum spacers. In addition to CFD testing, the Ultra Series Intake Manifold has undergone extensive \u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003ein-house dyno and on-car testing which has led to a design that is less restrictive, yielding both torque and power gains well over many of the competitors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003eUltra Series Intake Manifolds are made from high-grade 356 aluminium alloy for a strong and lightweight design, CNC-machined for a precise fit, and individually inspected for quality assurance. The large 90mm throttle body opening, 87mm velocity stacks, and hi-velocity intake runners with smooth transitions allow the Ultra Series Manifold to outflow the competition. Designed to be used with built, high-horsepower naturally aspirated or forced induction setups, the Skunk2 Ultra Series Intake Manifold \u003cstrong\u003ehelps provide a new level affordable high-end intake technology\u003c\/strong\u003e to the marketplace.\u003cbr\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cbr\u003e FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAvailable in 3.5L (4.5L and 5.5L configurations require purchase of optional spacers)\u003c\/li\u003e\n\u003cli\u003eOptional Billet Aluminum Plenum Spacers in 1L or 2L sizes\u003c\/li\u003e\n\u003cli\u003eHi-Grade Mounting Hardware\u003c\/li\u003e\n\u003cli\u003e6.5” Tilted \u0026amp; Tapered Hi-Velocity Runners\u003c\/li\u003e\n\u003cli\u003eRaised 87mm Velocity Stacks - Plenty of Material to Port\u003c\/li\u003e\n\u003cli\u003eProvisions for additional injectors on bottom side of runners\u003c\/li\u003e\n\u003cli\u003e90mm Throttle Body Flange - Std. 5.0L Ford Pattern\u003c\/li\u003e\n\u003cli\u003e4 x 1\/8” NPT, 3 x 1\/4” NPT and 1 x OEM AIT Port\u003c\/li\u003e\n\u003cli\u003eIncludes Thermal Manifold Flange Gasket\u003c\/li\u003e\n\u003cli\u003eGenerously Cast Runner Walls for Porting\u003c\/li\u003e\n\u003cli\u003eFits ALL Popular Chassis Configurations - Not Just Race Cars \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003e\u003cspan class=\"product-note-intro\"\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: \u003c\/span\u003eIdeal for turbocharged and extreme naturally aspirated racing applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e3.5 liter= High Horsepower N\/A and Forced Induction applications up to 600hp\u003cbr\u003e 4.5 liter= 600-1000 horsepower\u003cbr\u003e 5.5 liter= 1,000 horsepower and up\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"1280\" height=\"720\" src=\"https:\/\/www.youtube.com\/embed\/_GvJZKIrukY\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Bare Alloy \/ 3.5L","offer_id":29175359864931,"sku":"skk307-05-9000","price":1914.64,"currency_code":"NZD","in_stock":true},{"title":"Black Powdercoat \/ 3.5L","offer_id":29175359897699,"sku":"skk307-05-9055","price":2019.1,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/b_ultra_race_mani_1.jpg?v=1569190309"},{"product_id":"ati-super-damper-b-series","title":"ATI Super Damper - B Series","description":"\u003cp\u003eATI has designed a 5.5\" damper for the Honda B-Series for high horsepower street use. This new design is a direct replacement for the stock OEM B16, B18 and Honda B20 damper. The heart of this unit is the tried and true damper within a damper design that has put ATI ahead of the rest. The outer shell has been machined with the necessary multi groove pulleys to utilize the factory serpentine belt set-ups.\u003c\/p\u003e\n\u003cp\u003eThe damper includes a removable serpentine style power steering pulley for 94 and newer B-Series applications, with the V-groove power steering pulley available upon request for the earlier B-Series applications.\u003c\/p\u003e\n\u003cp\u003eATI's 7\" and 6.325\" race versions are built with all-out power in mind. You won't find drives for A\/C and power steering here. The alternator drive is built into the hub with laser engraved 360 timing marks on outer damper shell.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptions Explained:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStreet w' AC\/PS - High horsepower street use - n\/a \u0026amp; turbo applications\u003cbr\u003e Race 300HP+ w\/o' AC\/PS - Race use - High Horsepower N\/A - 3.5lb\u003cbr\u003e Race 300HP+ w\/o' AC\/PS - Race use - High Horsepower Forced Induction 5lb\u003c\/p\u003e","brand":"ATI","offers":[{"title":"Race 400HP w\/o' AC\/PS 3.75lb","offer_id":29175361044579,"sku":"918470","price":889.36,"currency_code":"NZD","in_stock":true},{"title":"Race 400HP+ w\/o' AC\/PS 5lb","offer_id":29175361077347,"sku":"918471","price":877.11,"currency_code":"NZD","in_stock":true},{"title":"Street w' AC\/PS","offer_id":29175361011811,"sku":"918476","price":833.71,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/OEM-honda-small.jpg?v=1580874925"},{"product_id":"skunk2-alpha-titanium-retainer-set-b-h-series","title":"Skunk2 Alpha Titanium Retainers - B\/H Series","description":"\n\u003cp\u003eSkunk2's industry-leading Alpha Titanium Retainers are designed to significantly reduce valvetrain mass, resulting in more horsepower and improved valvetrain stability. Similar to Skunk2's already popular Pro Series Titanium Retainers, Alpha Titanium Retainers feature radius-cut edges for additional rocker arm clearance and reduced weight, strategically positioned lightening grooves, and reduced overall heights for better valve seal clearance and even further weight reduction.\u003c\/p\u003e\n\u003cp\u003eAlpha Titanium Retainers are manufactured using the latest 3D CAD (Computer Aided Design) and FEA (Finite Element Analysis) to ensure that each is optimized for strength as well as for reduced weight. Skunk2 engineers then test and prove their designs on the engine dyno as well as the race track. \u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003eOnce approved for manufacturing, only medical-grade titanium that's been ultrasonically inspected and certified is used. Following CNC machining, each retainer is then individually inspected to ensure proper hole diameter, taper, and that each are free from machining defects to ensure proper installed valve spring heights and pressures. Finally, each retainer is serialized for your protection, including valuable information, like material batch specifics as well as production and inspection dates.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSkunk2 designs, develops, and tests its entire valvetrain lineup in-house to ensure superior quality and maximum performance gains. During development, each valvetrain component is tested both on the dyno and the road, including 11,000 rpm drag racing engines and 17,000 rpm superbikes. Manufactured from the best materials available, Skunk2 valvetrain components provide exceptional performance, reliability, and quality and remain standard-issue on each Skunk2 vehicle that we build and support.\u003c\/p\u003e\n\u003cp\u003eSkunk2 designs, develops, and tests its entire valvetrain lineup in-house to ensure superior quality and maximum performance gains. During development, each valvetrain component is tested both on the dyno and the road, including 11,000 rpm drag racing engines and 17,000 rpm superbikes. Manufactured from the best materials available, Skunk2 valvetrain components provide exceptional performance, reliability, and quality and remain standard-issue on each Skunk2 vehicle that we build and support. Although retainers may appear easy to make, they remain a critical engine component where quality control is crucial. Material flaws and improper machining can result in incorrect valve spring installed heights and potential retainer failures. Skunk2 cautions enthusiasts from using retainers made from companies that claim to have engineering capabilities but do not have practical engine building, CAD modeling, and machining experience.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cbr\u003eNot compatible with Pro-Series camshafts - Must use spring base kit in H\/F Series applications.\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175363272803,"sku":"skk308-05-1300","price":459.86,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/dsc_0001_4.jpg?v=1569190310"},{"product_id":"epman-billet-wire-cover-b-series","title":"EPMAN Billet Wire Cover - B Series","description":"\u003cp\u003e\u003cstrong\u003eEPMAN Billet Wire Cover – B Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eAn ideal finishing touch to any B series motor.\u003c\/p\u003e\n\u003cp\u003eQuick to install, fits well and looks good!\u003c\/p\u003e","brand":"EPMAN","offers":[{"title":"Black","offer_id":29175363338339,"sku":"EP-YQG03Honda-BLK","price":64.8,"currency_code":"NZD","in_stock":true},{"title":"Blue","offer_id":29175363371107,"sku":"EP-YQG03Honda-BLU","price":64.8,"currency_code":"NZD","in_stock":true},{"title":"Gold","offer_id":29175363403875,"sku":"EP-YQG03Honda-GLD","price":64.8,"currency_code":"NZD","in_stock":true},{"title":"Gunmetal","offer_id":29175363436643,"sku":"EP-YQG03Honda-GUN","price":64.8,"currency_code":"NZD","in_stock":true},{"title":"Purple","offer_id":29175363502179,"sku":"EP-YQG03Honda-PUR","price":64.8,"currency_code":"NZD","in_stock":true},{"title":"Red","offer_id":29175363469411,"sku":"EP-YQG03Honda-RED","price":64.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Screen-Shot-2016-09-05-at-4.40.26-PM.png?v=1580874940"},{"product_id":"epman-billet-cam-plug-seal-b-series","title":"EPMAN Billet Cam Plug Seal - B\/H Series V-Tec","description":"\u003cp\u003eSuperior to the OEM plug, which often leaks.\u003c\/p\u003e\n\u003cp\u003eThe EPMAN cam seal plug has 3 o-rings making it virtually impossible to leak. It also looks cool too!\u003c\/p\u003eWill fit all B Series and H\/F Series DOHC V-Tec engines (excl f20c)","brand":"EPMAN","offers":[{"title":"Black","offer_id":29175364288611,"sku":"EP-FG004-BK","price":19.84,"currency_code":"NZD","in_stock":true},{"title":"Blue","offer_id":29175364354147,"sku":"EP-FG004-BL","price":19.84,"currency_code":"NZD","in_stock":true},{"title":"Gold","offer_id":29175364255843,"sku":"EP-FG004-GD","price":19.84,"currency_code":"NZD","in_stock":true},{"title":"Green","offer_id":29175364419683,"sku":"EP-FG004-GR","price":19.84,"currency_code":"NZD","in_stock":true},{"title":"Gunmetal","offer_id":29175364452451,"sku":"EP-FG004-GU","price":19.84,"currency_code":"NZD","in_stock":true},{"title":"Purple","offer_id":29175364386915,"sku":"EP-FG004-PR","price":19.84,"currency_code":"NZD","in_stock":true},{"title":"Red","offer_id":29175364223075,"sku":"EP-FG004-RD","price":19.84,"currency_code":"NZD","in_stock":true},{"title":"Silver","offer_id":29175364321379,"sku":"EP-FG004-SI","price":19.84,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Screen-Shot-2016-09-05-at-4.18.01-PM.png?v=1580874946"},{"product_id":"epman-cam-cap-washer-kit-b-series","title":"EPMAN Cam Cap Washer Kit - B Series","description":"\n\u003cp\u003eA nice finishing touch to your engine bay.\u003c\/p\u003e\n\u003cp\u003eEasy install in minutes!\u003c\/p\u003e","brand":"EPMAN","offers":[{"title":"Black","offer_id":29175365238883,"sku":"EP-DP011-BK","price":19.84,"currency_code":"NZD","in_stock":true},{"title":"Blue","offer_id":29175365304419,"sku":"EP-DP011-BL","price":19.84,"currency_code":"NZD","in_stock":true},{"title":"Gold","offer_id":29175365206115,"sku":"EP-DP011-GD","price":19.84,"currency_code":"NZD","in_stock":true},{"title":"Green","offer_id":29175365369955,"sku":"EP-DP011-GR","price":19.84,"currency_code":"NZD","in_stock":true},{"title":"Gunmetal","offer_id":29175365402723,"sku":"EP-DP011-GU","price":19.84,"currency_code":"NZD","in_stock":true},{"title":"Purple","offer_id":29175365337187,"sku":"EP-DP011-PR","price":19.84,"currency_code":"NZD","in_stock":true},{"title":"Red","offer_id":29175365173347,"sku":"EP-DP011-RD","price":19.84,"currency_code":"NZD","in_stock":true},{"title":"Silver","offer_id":29175365271651,"sku":"EP-DP011-SI","price":19.84,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/EPMAN-6mm-racing-Metric-Cup-Washer-Kit-Cam-Cap-B-Series-DEFAULT-COLOR-Blue-EP-DP011.jpg_640x640_d617ac40-b8c1-4a73-a515-c6deba96f80e.jpg?v=1580787771"},{"product_id":"epman-header-washer-kit","title":"EPMAN Header Washer Kit","description":"\n\u003cp\u003eTake your engine bay to the next level with the bolt\/washer set for your exhaust manifold.\u003c\/p\u003e\n\u003cp\u003eA nice touch on both factory or aftermarket headers.\u003c\/p\u003e","brand":"EPMAN","offers":[{"title":"Black","offer_id":29175369629795,"sku":"EP-DQ001-BK","price":26.45,"currency_code":"NZD","in_stock":true},{"title":"Blue","offer_id":29175369695331,"sku":"EP-DQ001-BL","price":26.45,"currency_code":"NZD","in_stock":false},{"title":"Green","offer_id":29175369760867,"sku":"EP-DQ001-GR","price":26.45,"currency_code":"NZD","in_stock":true},{"title":"Red","offer_id":29175369564259,"sku":"EP-DQ001-RD","price":26.45,"currency_code":"NZD","in_stock":true},{"title":"Silver","offer_id":29175369662563,"sku":"EP-DQ001-SI","price":26.45,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/EPMAN-brand-JDM-style-8MM-Metric-Header-Cup-Washers-Kit-Various-for-Honda-Engines-EP-DQ001.jpg?v=1614583875"},{"product_id":"epman-block-bung-breather-kit-b-series","title":"EPMAN Block Bung \u0026 Breather Kit - B Series","description":"\u003cp\u003e\u003cstrong\u003eEPMAN Block Bung \u0026amp; Breather Kit – B Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eA must have for any decent catch can system.\u003c\/p\u003e\n\u003cp\u003eDelete the standard PCV valve and vent excess block pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Contains:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x block plug\u003c\/li\u003e\n\u003cli\u003e2 x m28\/-10 fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: The block plug is a very tight fit - lube and careful installation required\u003c\/p\u003e","brand":"EPMAN","offers":[{"title":"Black","offer_id":29175369826403,"sku":"EP-FGFT001-BK","price":51.58,"currency_code":"NZD","in_stock":true},{"title":"Blue","offer_id":29175369859171,"sku":"EP-FGFT001-BL","price":51.58,"currency_code":"NZD","in_stock":true},{"title":"Red","offer_id":29175369891939,"sku":"EP-FGFT001-RD","price":51.58,"currency_code":"NZD","in_stock":true},{"title":"Silver","offer_id":29175369924707,"sku":"EP-FGFT001-SI","price":51.58,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/High-Quality-EPMAN-BLUE-REAR-BLOCK-BREATHER-FITTINGS-PLUG-FOR-HONDA-ACURA-B16-B18-M28-TO.jpg?v=1580787779"},{"product_id":"epman-hardened-engine-mount-bushes-pair","title":"EPMAN Hardened Engine Mount Bushes (pair)","description":"\u003cp\u003eReplacement engine mount bushes to suit EPMAN mounts.\u003c\/p\u003e\n\u003cp\u003eGood to keep on hand for spares or suitable when making your own custom mounts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold as Pair\u003c\/strong\u003e\u003c\/p\u003e","brand":"EPMAN","offers":[{"title":"Default Title","offer_id":29175371464803,"sku":"CXX-PB001","price":33.06,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/85322e7ec2d07dd4baa6fc2634954e87.image_.550x550.jpg?v=1580787791"},{"product_id":"epman-silicone-radiator-hose-kit-b16a-b18cr","title":"EPMAN Silicone Radiator Hose Kit - B16A\/B18CR","description":"\u003cp\u003e\u003cstrong\u003eEPMAN Silicone Radiator Hose Kit – B16A\/B18CR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor High Temperature and High Boost Application.\u003c\/p\u003e\n\u003cp\u003eWithstands Operating Temperatures from -65F to 500F Degrees Fahrenheit.\u003c\/p\u003e\n\u003cp\u003eWorking pressure 85 PSI \/ Burst pressure 245 PSI\u003c\/p\u003e\n\u003cp\u003eWill suit any fwd chassis with B series PR 3 head (b16a\/b16b\/b18cr).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"EPMAN","offers":[{"title":"Black","offer_id":29175377723491,"sku":"TK-ARR002-BLK","price":104.48,"currency_code":"NZD","in_stock":true},{"title":"Blue","offer_id":29175377690723,"sku":"TK-ARR002-BLU","price":104.48,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Screen-Shot-2017-10-25-at-10.08.44-AM.png?v=1580875046"},{"product_id":"blox-racing-billet-cam-seal-b-h-series","title":"BLOX Racing Billet Cam Seal - Version 3","description":"\u003cp\u003eBLOX Racing Billet Cam Seals – B\/H Series\u003c\/p\u003e\n\u003cp\u003eBLOX Racing cam seals are CNC-machined from high quality billet aluminium and feature three O-rings. Each piece is anodized for durability and offers maximum protection against oil leaks compared to OEM or other aftermarket cam seals.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe version 2 BLOX Racing cam seal's design features a fixed-logo insert.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eBLOX Racing always recommends brand new cam seals whenever servicing, removing and replacing camshafts. Fits Honda and Acura B-series and H-series engines.\u003c\/p\u003e","brand":"BLOX Racing","offers":[{"title":"Purple","offer_id":29175381885027,"sku":"BXAC-00402-PR-V2","price":39.16,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/billetcamseals-all-500x500.jpg?v=1580787831"},{"product_id":"arp-crank-pulley-bolt-b-series","title":"ARP Crank Pulley Bolt - B Series","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003eAs the crankshaft flexes and twists, the balancer absorbs incredible amounts of kinetic energy. To ensure that the balancer is locked in position, ARP has developed these ultra-strong 200,000 psi bolts that let you exert maximum clamping force. Special features include 1\/4\" thick, wide area washer and an extra tall 12-point head that accepts a deep socket and eliminates the worry of stripping the head.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSquare Drive Balancer Bolts\u003c\/strong\u003e\u003cbr\u003e ARP offers a special version of its rugged 200,000 psi rated balancer bolt that can accept a standard 1\/2\" drive ratchet or breaker bar to facilitate rotating\u003cbr\u003e the crank assembly.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2\" square drive forged into bolt head, enabling the rotation of an engine with any 1\/2\" drive tool\u003c\/li\u003e\n\u003cli\u003eMade from heat-treated 8740 chrome-moly steel with heavy-duty black oxide finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":29175382343779,"sku":"arp208-2501","price":100.52,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/91eUApP_4SL._AC_SY550.jpg?v=1582171415"},{"product_id":"je-pistons-set-b-series","title":"JE Forged Pistons Set - B Series","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eJE Forged Pistons - B Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJE Pistons are specifically engineered for extreme applications up to, and including, professional competition. These pistons are made with 2618 T6 high tensile forged aluminum alloy and feature smooth flowing radii for excellent flame travel.\u003c\/p\u003e\n\u003cp\u003eIf you want to make reliable horsepower and lots of it, you need these!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDome\/Dish requires no deburring or preparation\u003c\/li\u003e\n\u003cli\u003e2618 T6 high tensile forged aluminum\u003c\/li\u003e\n\u003cli\u003eJE designs are specifically engineered for extreme applications up to, and including, professional competition. In this environment, the higher compression ratios, highest boost or heavy nitrous usage necessitate the higher tensile strength 2618 aluminium alloy.\u003c\/li\u003e\n\u003cli\u003eDome and dishes feature smooth flowing radii for excellent flame travel.\u003c\/li\u003e\n\u003cli\u003e1.0 x 1.2 x 2.8mm ring widths.\u003c\/li\u003e\n\u003cli\u003e.827 x 2.250 straight wall carbon steel wrist pin provided.\u003c\/li\u003e\n\u003cli\u003ePin fitting and wire locks included\u003c\/li\u003e\n\u003cli\u003eRings Now Included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JE Pistons","offers":[{"title":"12.5:1 Naturally Aspirated \/ 84.5mm (b20 \u0026 stroker)","offer_id":29175383261283,"sku":"je302417","price":1776.81,"currency_code":"NZD","in_stock":true},{"title":"9:1 Forced Induction \/ 81.5mm (b16\/18)","offer_id":29175383195747,"sku":"je302502","price":1776.81,"currency_code":"NZD","in_stock":true},{"title":"12.5:1 Naturally Aspirated \/ 81.5mm (b16\/18)","offer_id":29175383228515,"sku":"je302505","price":1776.81,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/rsz_je_piston_kit_zoom.jpg?v=1580875120"},{"product_id":"jenvey-sf-taper-throttle-body-kit-b-series","title":"Jenvey SF Taper Throttle Body Kit - B Series - Base Pricing","description":"\u003ch4\u003e\u003cstrong\u003ePRODUCTS THAT ARE PRICED HERE ARE BASE PRICES \u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003cp\u003eHonda B16 \u0026amp; B18c5 ITB throttle body kit from Jenvey Dynamics includes four SF48\/4.5\/1 taper throttle bodies ( ITB's), a Jenvey Dynamics EFI inlet manifold, fuel rail, and four 90mm long airhorns.\u003c\/p\u003e\n\u003cp\u003eJenvey throttle bodies and all Jenvey throttle body accessories are engineered for Motorsport, offering excellent performance, reliability, lightness, and value.\u003c\/p\u003e\n\u003cp\u003eThis 52mm SF Taper throttle body kit is ideal for high compression, big cam engines being used in race application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: See related products for air filter, tps, throttle linkage and other recommended parts\u003c\/p\u003e","brand":"Jenvey","offers":[{"title":"B16A\/B \u0026 B18CR","offer_id":29175386079331,"sku":"CKHA01","price":3986.05,"currency_code":"NZD","in_stock":true},{"title":"B18C Black Top","offer_id":29175386112099,"sku":"CKHA02","price":3986.05,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/ckha01.jpg?v=1580875129"},{"product_id":"skunk2-pro-series-intake-manifold-b18c-black-top","title":"Skunk2 Pro Series Intake Manifold - B18C (black top)","description":"\n\u003cp\u003eMore than a decade ago, Skunk2’s engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2’s Pro Series Intake Manifold in our signature Black Series finish for Honda's B-series VTEC engines (GS-R only) features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains.\u003cbr\u003e \u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003e\u003cbr\u003e Skunk2’s cast-aluminum Pro Series Intake Manifolds for Honda’s B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors’ manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSkunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"951\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/_GvJZKIrukY\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Silver","offer_id":29175391223907,"sku":"skk307-05-0270","price":636.18,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":29175391191139,"sku":"skk307-05-0275","price":691.33,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/307-05-0270_1.jpg?v=1622520220"},{"product_id":"skunk2-4-bar-map-sensor-b-d-h-f-series","title":"Skunk2 4 Bar MAP Sensor - B\/D\/H\/F Series","description":"\u003cp\u003eSkunk2 is proud to offer a 4-Bar MAP Sensor for B, D, H, and F-series (F20B \u0026amp; SOHC and ’00-’05 S2000) engines.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSkunk2 MAP sensors are plug-in compatible and are direct replacements for Honda’s factory-issued MAP sensor.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecs\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\n@page { margin: 2cm }\n\t\tP { margin-bottom: 0cm }\n\t\tP.western { font-family: \"Arial\", serif; font-size: 10pt; so-language: en-US; font-weight: bold }\n\t\tP.cjk { font-family: \"Arial\"; font-size: 10pt; so-language: en-US; font-weight: bold }\n\t\tP.ctl { font-family: \"Arial\"; font-size: 10pt; so-language: ar-SA; font-weight: bold }\n--\u003e\u003c\/style\u003e\n\u003cp align=\"LEFT\" class=\"western\"\u003e\u003cspan face=\"Times New Roman, serif\" style=\"font-family: 'Times New Roman', serif;\"\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003e\u003cspan size=\"2\" style=\"font-size: small;\"\u003eScalar 838\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"LEFT\" class=\"western\"\u003e\u003cspan face=\"Times New Roman, serif\" style=\"font-family: 'Times New Roman', serif;\"\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003e\u003cspan size=\"2\" style=\"font-size: small;\"\u003eOffset 31\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"western\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp align=\"LEFT\" class=\"western\"\u003e\u003cspan face=\"Times New Roman, serif\" style=\"font-family: 'Times New Roman', serif;\"\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003e\u003cb\u003eVoltage to pressure (KPA) conversion\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"western\" lang=\"en-US\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"western\" lang=\"en-US\"\u003eP= pressure in KPA 4 bar = 400 KPA\u003c\/p\u003e\n\u003cp class=\"western\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"western\" lang=\"en-US\"\u003eVoltage out\/signal = 5 X (.002421 X P - .00842)\u003c\/p\u003e\n\u003cp class=\"western\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"western\" lang=\"en-US\"\u003eAtmosphere equals 1 bar or 100 KPA = 5 X (.002421 X 100 - .00842) = 1.168 volts @ 1 bar or 100 KPA\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175391256675,"sku":"skk352-05-1510","price":253.98,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/b_series.jpg?v=1569190312"},{"product_id":"skunk2-plenum-spacer-ultra-street-b-k","title":"Skunk2 Ultra Street Plenum Spacer","description":"\n\u003cp\u003eForced induction, big block b series or k series owners - you'll wanna add this to the mix.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e.50L Billet Aluminum Spacer\u003c\/li\u003e\n\u003cli\u003eLonger Socket Head Hardware\u003c\/li\u003e\n\u003cli\u003eGaskets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175391551587,"sku":"skk907-05-9100","price":257.96,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/silver_.5_spacer_2_1.jpg?v=1569190312"},{"product_id":"moroso-baffled-sump-b-series-4-quart-capacity","title":"Moroso Baffled Sump - B Series 4 Quart Capacity","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAs at June 2025 Moroso has stopped supplying zinc coated sumps. All sumps will now be powder coated black. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBolt-on OEM spec sump with baffle - perfect for the car that sees the occasional track day and doesn't require the higher-spec kicked out, trap door version.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with OEM exhaust manifold and most aftermarket exhaust\/header combinations\u003c\/li\u003e\n\u003cli\u003eSump baffle that fully surrounds oil pump pickup\u003c\/li\u003e\n\u003cli\u003eTurbo\/Supercharger oil drain back\u003c\/li\u003e\n\u003cli\u003eIncludes a magnetic drain plug\u003c\/li\u003e\n\u003cli\u003eTemperature sensor bung provision\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Moroso","offers":[{"title":"Default Title","offer_id":29175393419363,"sku":"20911","price":544.46,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/files\/20911_black.jpg?v=1749175227"},{"product_id":"speedfactory-na-catch-can-kit-b-series","title":"SpeedFactory NA Catch Can Kit- B Series","description":"\u003cp\u003e\u003cstrong\u003eSpeedFactory NA Catch Can Kit - B series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SpeedFactory Racing Naturally Aspirated Catch Can is designed to work with any B-Series naturally aspirated (non-supercharged, non-turbocharged) engine setup.\u003c\/p\u003e\n\u003cp\u003eThis breather setup is engineered to provide the sufficient crankcase ventilation your high-performance engine needs, and also condenses crankcase blow-by oil and moisture correctly. The factory PCV system is replaced and all oil vapours are vented to the atmosphere through the single filter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis kit includes the following:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Naturally Aspirated Catch Can\u003c\/li\u003e\n\u003cli\u003e1 x  Breather Filter\u003c\/li\u003e\n\u003cli\u003e2 x  B-Series engine block adapter fittings\u003c\/li\u003e\n\u003cli\u003e2 x Catch can hose fittings\u003c\/li\u003e\n\u003cli\u003e1 x  Mounting bracket and (1)clamp\u003c\/li\u003e\n\u003cli\u003e1 x  Drain Plug\u003c\/li\u003e\n\u003cli\u003e1 x Oil hose and (4) clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCatch Can Dimensions: 3\" diameter x 7\" tall\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUse with SpeedFactory or Epman Block Bungs\u003c\/strong\u003e\u003c\/p\u003e","brand":"SpeedFactory","offers":[{"title":"Default Title","offer_id":29175397711971,"sku":"SF-02-035","price":386.44,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Screen-Shot-2018-09-06-at-4.53.44-PM.png?v=1580875229"},{"product_id":"speedfactory-complete-tucked-radiator-kit-b-series","title":"SpeedFactory Complete Tucked Radiator Kit - B Series","description":"\u003cp\u003e\u003cstrong\u003eSpeedFactory Complete Tucked Radiator Kit - \u003c\/strong\u003e\u003cstrong\u003eB Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SpeedFactory Racing Aluminium Tucked Radiator is a must-have when trying to utilize precious engine bay space. It is not only more efficient than the oem radiator resulting in increased performance but also provides lower coolant temperatures in extreme environments and conditions.\u003c\/p\u003e\n\u003cdiv class=\"std\"\u003e\n\u003cp\u003eThe core is 100% aluminium and is a dual-pass, dual-core cross flow design that is proven to reduce coolant temperatures by up to 20-30 degrees. The Speedfactory logo is CNC engraved into the top bar of the radiator itself. It is designed to fit with minimal modifications (minor drilling) to the mounting area.\u003c\/p\u003e\n\u003cp\u003eThis radiator is designed for street, track, and show applications.\u003c\/p\u003e\n\u003cp\u003e*Proudly made in the USA\u003c\/p\u003e\n\u003cp\u003e*Overall dimensions 24\" wide x 9 1\/2\" tall x 3\" thick (with fan \u0026amp; shroud combo 5 1\/2\" thick)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpeedFactory Tucked Radiator -16 inlets\/outlets\u003c\/li\u003e\n\u003cli\u003eDual SPAL Fans \u0026amp; Shroud\u003c\/li\u003e\n\u003cli\u003eSpeedFactory Filler Neck\u003c\/li\u003e\n\u003cli\u003eSpeedFactory Thermostat Housing\u003c\/li\u003e\n\u003cli\u003eVibrant -16 Straight Fitting x2\u003c\/li\u003e\n\u003cli\u003eVibrant -16 45 degree fitting x2\u003c\/li\u003e\n\u003cli\u003eVibrant -16 hose x 5 feet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou won't find a better quality, more comprehensive and better-performing radiator kit than this!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.facebook.com\/plugins\/video.php?href=https%3A%2F%2Fwww.facebook.com%2Fspeedfactoryracing%2Fvideos%2F10156594868997738%2F\u0026amp;show_text=0\u0026amp;width=560\" width=\"560\" height=\"315\" style=\"border: none; overflow: hidden;\" scrolling=\"no\" frameborder=\"0\" allowtransparency=\"true\" allowfullscreen=\"true\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"SpeedFactory","offers":[{"title":"B\/D\/H\/F \/ -16AN \/ No","offer_id":29175401250915,"sku":"SF-06-031","price":1550.29,"currency_code":"NZD","in_stock":true},{"title":"B\/D\/H\/F \/ -16AN \/ Yes","offer_id":33281556676707,"sku":"SF-06-031+SF-06-048","price":2963.16,"currency_code":"NZD","in_stock":true},{"title":"B\/D\/H\/F \/ 32mm \/ No","offer_id":43737391497315,"sku":"SF-06-032","price":1550.29,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/rsz_tucked_combo_2.jpg?v=1580875234"},{"product_id":"mpc-billet-fuel-rail-b-series","title":"MPC Billet Fuel Rail - B Series","description":"\n\u003cp\u003eJust when you thought there was no other way to build a better B Series fuel rail, we’ve changed the game! Introducing the biggest, baddest fuel rail to date: The MPC Motorsport High-Flow Billet Fuel Rail.\u003c\/p\u003e\n\u003cp\u003eFrom stock engines to full blown drag cars, this fuel rail can handle all the abuse you can dish out. With a massive 11\/16’’ fuel bore, our rail was built to perform.\u003c\/p\u003e\n\u003cp\u003eBesides great craftsmanship, we’ve added several notable features in order to bring you the best fuel rail possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with all B Series Engines\u003c\/li\u003e\n\u003cli\u003e-8 Inlet\/Outlet\u003c\/li\u003e\n\u003cli\u003eLargest Flow Capacity Available (11\/16\")\u003c\/li\u003e\n\u003cli\u003eEnough fittings to work with virtually any setup\u003c\/li\u003e\n\u003cli\u003eMounting surface for oem\/aem fuel regulators\u003c\/li\u003e\n\u003cli\u003eSolid 6061-T6 Billet Construction\u003c\/li\u003e\n\u003cli\u003eEasily accessible gauge mounting port\u003c\/li\u003e\n\u003cli\u003eFlush-style mounting\u003c\/li\u003e\n\u003cli\u003ePrecision CNC Machined\u003c\/li\u003e\n\u003cli\u003eBuilt in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) MPC High Flow B Series Fuel Rail\u003c\/li\u003e\n\u003cli\u003e(1) 1\/8’’ Fitting\u003c\/li\u003e\n\u003cli\u003e(1) -8AN\/-6AN Fittings (O-Ring Sealed)\u003c\/li\u003e\n\u003cli\u003e(1) -8AN Plugs (O-Ring Sealed)\u003c\/li\u003e\n\u003cli\u003e(1) -8AN\/Factory Fuel Line Fitting (O-Ring Sealed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"951\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/YovvJZX0rkQ\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e \u003c\/p\u003e","brand":"MPC Motorsport","offers":[{"title":"Black","offer_id":29175403151459,"sku":"MPC-FUELRAIL-B-BLK","price":261.92,"currency_code":"NZD","in_stock":true},{"title":"Blue","offer_id":29175403184227,"sku":"MPC-FUELRAIL-B-BLU","price":249.17,"currency_code":"NZD","in_stock":true},{"title":"Gold","offer_id":42981489606755,"sku":"MPC-FUELRAIL-B-GD","price":261.92,"currency_code":"NZD","in_stock":true},{"title":"Purple","offer_id":29175403216995,"sku":"MPC-FUELRAIL-B-PUR","price":261.92,"currency_code":"NZD","in_stock":true},{"title":"Red","offer_id":42981490524259,"sku":"MPC-FUELRAIL-B-RD","price":261.92,"currency_code":"NZD","in_stock":true},{"title":"Silver","offer_id":42981490851939,"sku":"MPC-FUELRAIL-B-SL","price":261.92,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/fdaee3_d5ed93bab96b4613a0b831c2a2287b52-mv2_d_1200_1200_s_2.jpg?v=1580787936"},{"product_id":"k-tuned-shifter-bush-kit-b-series","title":"K-Tuned Shifter Bush Kit - B Series","description":"\n\u003cp\u003eApplication: B-Series EF\/EG\/EK\/DA\/DC2 (Original B16\/18 or B-Series Swap)\u003c\/p\u003e\n\u003cp\u003eReplacement bushings for b-series shifter linkage. Replace the cracked and worn out bushings on the transmission and the back of the linkage and help improve the overall feeling of your shifting. The replacement bushings are designed to withstand harsh conditions they will see daily driving your Honda\/Acura that has been running strong for 20 years. Installation can be done using simple hand tools.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eNote: Bushes are a slightly upgrade in firmness from oem.\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":29175411212387,"sku":"KTD-BS-BUS","price":70.93,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/R1-09399-RT.jpg?v=1580787996"},{"product_id":"skunk2-pro-series-intake-manifold-b16-b18cr","title":"Skunk2 Pro Series Intake Manifold - B16\/B18CR","description":"\n\u003cp\u003eMore than a decade ago, Skunk2’s engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2’s Pro Series Intake Manifold in its signature Black Series finish for Honda's B-series VTEC engines (non-GS-R) features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains.\u003c\/p\u003e\n\u003cp\u003eSkunk2’s cast-aluminum Pro Series Intake Manifolds for Honda’s B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors’ manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power.\u003c\/p\u003e\n\u003cp\u003eSkunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"951\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/_GvJZKIrukY\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Silver","offer_id":29175419306083,"sku":"skk307-05-0290","price":636.18,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":29175419273315,"sku":"skk307-05-0295","price":691.33,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/0290-01_1.jpg?v=1569190314"}],"url":"https:\/\/www.speedscience.co.nz\/collections\/honda-b18c-b18cr.oembed","provider":"Speed Science","version":"1.0","type":"link"}