{"title":"Fuel System","description":"","products":[{"product_id":"grams-performance-1000cc-injectors-b-d-h-f-series","title":"Grams Performance 1000cc Injectors - B\/D\/H\/F Series","description":"\u003cp\u003eGrams Performance offers innovative, high-performance fuel injectors for today's vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch¨ injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eGrams Performance 1000cc fuel injectors are chosen by professional motorsports and performance enthusiasts because of their quality, consistency, value, and ease of use. They were designed primarily to be used with gasoline based fuels, however, may be used with alcohol based fuels with the understanding that the fuel system must be regularly flushed out and stored with gasoline to minimize flow losses associated with the use of alcohol on a consistent basis.c\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES \u0026amp; BENEFITS:\u003c\/strong\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with all known fuels including gasoline, methanol, and ethanol\u003c\/li\u003e\n\u003cli\u003eFlowed and balanced to within 1% for consistency\u003c\/li\u003e\n\u003cli\u003ePrecise fuel metering up to 118 psi (8 bar)\u003c\/li\u003e\n\u003cli\u003ePressure tested up to 220 psi (15.16 bar)\u003c\/li\u003e\n\u003cli\u003eLightweight valve needle and ultra-fast solenoid\u003c\/li\u003e\n\u003cli\u003eImproved atomization for greater combustion efficiency and reduced emissions\u003c\/li\u003e\n\u003cli\u003eLeak-free operation and optimal performance\u003c\/li\u003e\n\u003cli\u003eHigh-impedance design (no resistor box required)\u003c\/li\u003e\n\u003cli\u003eOver-molded one-piece design for added reliability and simplicity.\u003c\/li\u003e\n\u003cli\u003eMade from Bosch¨ EV14 Standard housing\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement\u003c\/li\u003e\n\u003cli\u003eComes with injector latency data to accurately set up aftermarket ECU\u003c\/li\u003e\n\u003cli\u003eEV6-USCAR electrical connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grams Performance","offers":[{"title":"Default Title","offer_id":29175286923363,"sku":"grpG2-1000-0500","price":1023.76,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/G20-05-1710_1.jpg?v=1569190298"},{"product_id":"aem-adjustable-fuel-pressure-regulator-b-d-series","title":"AEM Adjustable Fuel Pressure Regulator - Honda B Series \u0026 D (EF\/EG)","description":"\u003cp\u003eAEM's Honda\/Acura Adjustable Fuel Pressure Regulators are capable of supporting enough fuel flow for engines up to 1000 horsepower. Our patented interchangeable discharge ports enable the regulator's output to match the output of any fuel pump. AEM includes a custom barb fitting to accommodate the factory fuel hose and the base of each regulator is tapped to accept a -6 AN or 9\/16”x18 fittings.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable from 20 psi to maximum fuel pump capacity\u003c\/li\u003e\n\u003cli\u003eInterchangeable discharge ports match regulator output to output of any fuel pump\u003c\/li\u003e\n\u003cli\u003ePatent # 6,298,828\u003c\/li\u003e\n\u003cli\u003eCNC-machined from 6061-T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003eNo additional parts required for installation\u003c\/li\u003e\n\u003cli\u003eMounts directly to O.E. fuel rail or AEM High Volume Fuel Rail\u003c\/li\u003e\n\u003cli\u003eManufactured and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":29175289020515,"sku":"aem25-300BK","price":353.03,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/AEM25-300BK_1.jpg?v=1582164401"},{"product_id":"k-tuned-fuel-pressure-regulator","title":"K-Tuned Fuel Pressure Regulators","description":"\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll K-series engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e* Works with both N\/A and Forced induction applications.\u003c\/p\u003e\n\u003cp\u003e* Fuel pressure regulator with mount\u003c\/p\u003e\n\u003cp\u003e* Fitting size M6 X 1.0\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eK Tuned has designed a Fuel Pressure Regulator specifically for K series engine needs.  Full billet housing black anodized for a clean look and added durability.  Comes with an adjustable bracket to easily mount it anywhere.  A high quality diaphram is used internally, which is the most important piece.  This FPR is reliable and fully adjustable from 30 - 100 psi depending on the fuel pump being used.   Inlet and outlet ports are 8AN with a 6AN bottom port.\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"No Thanks \/ No Thanks","offer_id":29175332044899,"sku":"KFR-B-52","price":430.79,"currency_code":"NZD","in_stock":true},{"title":"Yes Please \/ No Thanks","offer_id":32595816972387,"sku":"KFR-FIT-B53","price":406.38,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/kfr-b-52_1.jpg?v=1580787433"},{"product_id":"vibrant-an-flare-plug","title":"Vibrant AN Flare Plug","description":"\n\n\u003cp\u003eGot a port that needs blocking off on your fuel reg, radiator header tank, fuel cell etc?\u003c\/p\u003e\n\u003cp\u003eThe this is what you use :)\u003c\/p\u003e\n\u003cp\u003eVibrant Performance are one of the USA's premier supplier of quality exhaust, fabrication and plumbing components.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Vibrant Performance","offers":[{"title":"-6","offer_id":29175350755427,"sku":"vib10442","price":13.79,"currency_code":"NZD","in_stock":true},{"title":"-8","offer_id":29175350788195,"sku":"vib10443","price":13.79,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/10440_WEBL.jpg?v=1580874728"},{"product_id":"vibrant-6-male-to-5-16-tube-adaptor-with-olive","title":"Vibrant -6 AN Male To 5\/16\" Tube Adaptor With Olive","description":"\u003cp\u003e\u003cstrong\u003eVibrant -6 AN Male to Tube Adaptor w' Brass Olive\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUsed to convert from bundy (OEM fuel line supply) to AN fitting. This particular size is suited ideally to fuel feed line on most Honda models (and many other makes).\u003c\/p\u003e\n\u003cp\u003eVibrant Performance is one of the USA's premier supplier of quality exhaust, fabrication and plumbing components.\u003c\/p\u003e","brand":"Vibrant Performance","offers":[{"title":"Default Title","offer_id":30273338703971,"sku":"vib16455","price":36.83,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/16455_WEBL.jpg?v=1580874731"},{"product_id":"epman-billet-fuel-rail-k-series","title":"EPMAN Billet Fuel Rail - K Series","description":"\u003cp\u003e\u003cstrong\u003eEPMAN Billet Fuel Rail – K series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eDress up your bay and increase your fuel flow capacity with these cost-effective billet fuel rails from EPMAN.\u003c\/p\u003e\n\u003cp\u003eA must for K-Swap or when wanting to dress up the bay in a K equipped vehicle.\u003c\/p\u003e\n\u003cp\u003eIncludes port for fuel pressure gauge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Fuel lines will need to be changed when installing in factory equipped K20\/K24 powered vehicle\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePlease note this is an entry level budget product which is reflected in its pricing. Small burrs and scratches or lack in overall quality are not considered grounds for refund. Please opt for a higher quality brand if this is going to be an issue for your build.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"EPMAN","offers":[{"title":"Default Title","offer_id":29175376281699,"sku":"EP-K20YG","price":104.48,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/EPMAN-Engineering-Racing-Fuel-Rail-Kit-For-Honda-Acura-RSX-Integra-DC5-Type-r-K20-Blue.jpg_640x640-1.jpg?v=1580787795"},{"product_id":"aem-universal-fuel-pressure-regulator","title":"AEM Universal Fuel Pressure Regulator","description":"\u003cp\u003eAEM's Honda\/Acura Adjustable Fuel Pressure Regulators are capable of supporting enough fuel flow for engines up to 1000 horsepower. Our patented interchangeable discharge ports enable the regulator's output to match the output of any fuel pump. AEM includes a custom barb fitting to accommodate the factory fuel hose and the base of each regulator is tapped to accept a -6 AN or 9\/16”x18 fittings.\u003cbr\u003e\u003cbr\u003eFor Universal Applications: Our patented interchangeable discharge ports enable the regulator's output to match the output of any fuel pump. Our universal fuel pressure regulator is tapped to accept a -6 AN, or 9\/16”x18 fittings and includes a 1\/8 NPT port for a fuel pressure gauge or pressure sensor pick up.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable from 20 psi to maximum fuel pump capacity\u003c\/li\u003e\n\u003cli\u003eInterchangeable discharge ports match regulator output to output of any fuel pump\u003c\/li\u003e\n\u003cli\u003ePatent # 6,298,828\u003c\/li\u003e\n\u003cli\u003eCNC-machined from 6061-T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003eNo additional parts required for installation\u003c\/li\u003e\n\u003cli\u003eMounts directly to O.E. fuel rail or AEM High Volume Fuel Rail\u003c\/li\u003e\n\u003cli\u003eManufactured and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eParts that can be used to install with the regulator:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1 x E670340MH-BLK 6AN fitting straight fuel pressure take off female to male with female 1\/8 NPT side port\u003c\/p\u003e\n\u003cp\u003e3 x vib16826 Vibrant AN Flare To AN Straight Cut w' O-Ring Adaptor Fitting\u003c\/p\u003e\n\u003cp\u003e1 x Fuel Pressure Gauge - Grams, Epman, STM \u003c\/p\u003e\n\u003cp\u003eHow ever many you need for the install x vib21006 Vibrant Straight Hose End Fitting\u003c\/p\u003e\n\u003cp\u003ePhoto provided to give an example of the set up for install\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":29175382802531,"sku":"aem25-302BK","price":332.91,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/AEM_universal_adjustable_fuel_pressure_regulator_collage.jpg?v=1580875102"},{"product_id":"aem-fuel-rail-d-series","title":"AEM Fuel Rail - D Series (EK)","description":"\u003cp\u003eAEM High Volume fuel rails feature a 1\/2-inch fuel bore to support fuel flow for applications up to 1,000 horsepower. This large bore also dampens backpressure pulses created by larger injectors and works perfectly with stock injector sizes. An additional 1\/8th NPT port is included to accommodate a nitrous set up or fuel pressure gauge. A custom fuel line fitting is included for the factory fuel line, and the ends of each rail are pre tapped to accept -6 AN or 9\/16”x18 fittings for users who want to use custom fuel lines.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo additional parts required for installation\u003c\/li\u003e\n\u003cli\u003eSpecifically engineered for each application\u003c\/li\u003e\n\u003cli\u003eManufactured and assembled in the USA\u003c\/li\u003e\n\u003cli\u003eO.E. fuel pressure regulator or AEM adjustable fuel pressure regulator mounts directly to rail with no modifications\u003c\/li\u003e\n\u003cli\u003eComprehensive installation instructions, hardware, fittings and injector O-rings included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":29175385456739,"sku":"aem25-109BK","price":367.67,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/AEM25-100BK_1.jpg?v=1580875125"},{"product_id":"hybrid-racing-k-swap-tucked-fuel-rail","title":"Hybrid Racing K-Swap Tucked Fuel Rail","description":"\n\u003cp\u003eHybrid Racing fuel rails are made from 6061 aluminum with T6 heat treatment and features a durable anodized finish with a laser etched logo ensuring that your engine bay looks fresh and your engine stays fed!\u003c\/p\u003e\n\u003cp\u003eEach rail includes a 1\/8\" NPT hole that allow you to mount a fuel pressure gauge directly to your fuel rail. This puts the fuel pressure gauge in a spot that's easily visible, so you don't have to poke around in the engine bay just to see if you have fuel pressure. All of the ports can accept a -8 ORB fitting in the inlet(s) and outlet allowing you to run either -6 or -8 AN fuel lines.\u003c\/p\u003e\n\u003cp\u003eThe other detail that should stand out is the option for plugging the side inlet and outlet to allow you to run your fuel line to a centrally located -8 ORB fitting. This is positioned so that the fuel line can pass between the middle two cylinder intake runners (depending on your intake manifold.) This is an excellent option for anyone looking to tuck their wires and lines.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat intake manifolds is this rail compatible with?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis rail has been shown to mount to the PRB, RBC, and RBB intake manifolds without needing any modifications. Any aftermarket intake manifolds that share the same fuel rail mounting points as the PRB, RBC, or RBB should also accept this rail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal K-series Engine Fuel Rail.\u003c\/li\u003e\n\u003cli\u003eAllows you to tuck your fuel lines.\u003c\/li\u003e\n\u003cli\u003e1\/8th npt port for fuel pressure gauge.\u003c\/li\u003e\n\u003cli\u003eNinja Black for the stealthy look.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hybrid Racing","offers":[{"title":"Dust black","offer_id":29175394107491,"sku":"HYB-FRL-01-02","price":404.2,"currency_code":"NZD","in_stock":true},{"title":"Dust Red","offer_id":39645010493539,"sku":"HYB-FRL-01-03","price":404.2,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/img_0109_13.jpg?v=1580787888"},{"product_id":"hybrid-racing-k-swap-fuel-line-kit-oem-fuel-filter","title":"Hybrid Racing K-Swap Fuel Line Kit - OEM Fuel Filter","description":"\n\u003cp\u003e\u003cstrong\u003eSo why do you need a fuel line kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eK-Series engines are normally are supplied with return-less fuel systems, meaning the fuel pressure regulator is inside of the fuel tank and has only one line leading to the engine. In most cases, the chassis that you plan on installing your K series engine (in this case EG,EK,DC) utilizes a return system. In order to have the engine run correctly, you will need to convert the K-Series engine to a return system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat chassis is this kit for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit fits: 92-00 Civic \/ Del Sol \u0026amp; 94-01 Acura Integra\u003cbr\u003e This kit does not fit the EF or DA chassis.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does this kit come with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou will receive 3 lines with the appropriate fittings on the ends. The lines are offered in stainless steel or stainless steel \/ wrapped in black nylon. The black kit is our most popular kit for its stealthy look but they both get the job done perfect.\u003c\/p\u003e\n\u003cp\u003eThe kit also comes with 3 -6AN unions, a banjo fitting to connect to your OEM fuel filter and an adapter to connect to your hard line. This kit is not compatible with our inline filter.\u003c\/p\u003e\n\u003cp\u003eWe stand behind each one of our products and are 100% positive that you will have no problems with our fuel line kits. Each Hybrid Racing product comes with a money back guarantee.\u003c\/p\u003e","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":32473475121251,"sku":"HYB-FLK-01-02","price":361.65,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/ScreenShot2020-05-07at4.56.46PM.png?v=1588910441"},{"product_id":"mpc-billet-fuel-rail-b-series","title":"MPC Billet Fuel Rail - B Series","description":"\n\u003cp\u003eJust when you thought there was no other way to build a better B Series fuel rail, we’ve changed the game! Introducing the biggest, baddest fuel rail to date: The MPC Motorsport High-Flow Billet Fuel Rail.\u003c\/p\u003e\n\u003cp\u003eFrom stock engines to full blown drag cars, this fuel rail can handle all the abuse you can dish out. With a massive 11\/16’’ fuel bore, our rail was built to perform.\u003c\/p\u003e\n\u003cp\u003eBesides great craftsmanship, we’ve added several notable features in order to bring you the best fuel rail possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with all B Series Engines\u003c\/li\u003e\n\u003cli\u003e-8 Inlet\/Outlet\u003c\/li\u003e\n\u003cli\u003eLargest Flow Capacity Available (11\/16\")\u003c\/li\u003e\n\u003cli\u003eEnough fittings to work with virtually any setup\u003c\/li\u003e\n\u003cli\u003eMounting surface for oem\/aem fuel regulators\u003c\/li\u003e\n\u003cli\u003eSolid 6061-T6 Billet Construction\u003c\/li\u003e\n\u003cli\u003eEasily accessible gauge mounting port\u003c\/li\u003e\n\u003cli\u003eFlush-style mounting\u003c\/li\u003e\n\u003cli\u003ePrecision CNC Machined\u003c\/li\u003e\n\u003cli\u003eBuilt in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) MPC High Flow B Series Fuel Rail\u003c\/li\u003e\n\u003cli\u003e(1) 1\/8’’ Fitting\u003c\/li\u003e\n\u003cli\u003e(1) -8AN\/-6AN Fittings (O-Ring Sealed)\u003c\/li\u003e\n\u003cli\u003e(1) -8AN Plugs (O-Ring Sealed)\u003c\/li\u003e\n\u003cli\u003e(1) -8AN\/Factory Fuel Line Fitting (O-Ring Sealed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"951\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/YovvJZX0rkQ\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e \u003c\/p\u003e","brand":"MPC Motorsport","offers":[{"title":"Black","offer_id":29175403151459,"sku":"MPC-FUELRAIL-B-BLK","price":261.92,"currency_code":"NZD","in_stock":true},{"title":"Blue","offer_id":29175403184227,"sku":"MPC-FUELRAIL-B-BLU","price":249.17,"currency_code":"NZD","in_stock":true},{"title":"Gold","offer_id":42981489606755,"sku":"MPC-FUELRAIL-B-GD","price":261.92,"currency_code":"NZD","in_stock":true},{"title":"Purple","offer_id":29175403216995,"sku":"MPC-FUELRAIL-B-PUR","price":261.92,"currency_code":"NZD","in_stock":true},{"title":"Red","offer_id":42981490524259,"sku":"MPC-FUELRAIL-B-RD","price":261.92,"currency_code":"NZD","in_stock":true},{"title":"Silver","offer_id":42981490851939,"sku":"MPC-FUELRAIL-B-SL","price":261.92,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/fdaee3_d5ed93bab96b4613a0b831c2a2287b52-mv2_d_1200_1200_s_2.jpg?v=1580787936"},{"product_id":"vibrant-45-deg-elbow-hose-end-fitting","title":"Vibrant 45 Deg Elbow Hose End Fitting","description":"\n\u003cp\u003eVibrant Performance is one of the USA’s premier supplier of quality exhaust, fabrication and plumbing components.\u003c\/p\u003e\n\u003cp\u003eTheir fittings do not leak and will not fail.\u003c\/p\u003e\n\u003cp\u003eE85 Compatible\u003c\/p\u003e","brand":"Vibrant Performance","offers":[{"title":"-4","offer_id":29175419469923,"sku":"vib21404","price":52.95,"currency_code":"NZD","in_stock":true},{"title":"-6","offer_id":29175419502691,"sku":"vib21406","price":55.25,"currency_code":"NZD","in_stock":true},{"title":"-8","offer_id":29175419535459,"sku":"vib21408","price":61.25,"currency_code":"NZD","in_stock":true},{"title":"-10","offer_id":29175419568227,"sku":"vib21410","price":70.46,"currency_code":"NZD","in_stock":true},{"title":"-12","offer_id":29175419600995,"sku":"vib21412","price":81.28,"currency_code":"NZD","in_stock":true},{"title":"-16","offer_id":29175419633763,"sku":"vib21416","price":93.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/21406_WEBL.jpg?v=1580875492"},{"product_id":"hybrid-racing-k-series-fuel-rail-dc5-ep3","title":"Hybrid Racing K Series Fuel Rail - DC5\/EP3\/CL7","description":"\n\u003cp\u003eHybrid Racing fuel rails are made from 6061 aluminum with T6 heat treatment and feature a durable anodized finish with a laser etched logo ensuring that your engine bay looks fresh and your engine stays fed!\u003c\/p\u003e\n\u003cp\u003eEach rail includes a 1\/8\" NPT hole that allows you to mount a fuel pressure gauge directly to your fuel rail. This puts the fuel pressure gauge in a spot that's easily visible, so you don't have to poke around in the engine bay just to see if you have fuel pressure. All of the ports can accept a -8 ORB fitting in the inlet(s) and an outlet allowing you to run either -6 or -8 AN fuel lines.\u003c\/p\u003e\n\u003cp\u003eThe other detail that should stand out is the option for plugging the side inlet and outlet to allow you to run your fuel line to a centrally located -8 ORB fitting. This is positioned so that the fuel line can pass between the middle two cylinder intake runners (depending on your intake manifold.) This is an excellent option for anyone looking to tuck their wires and lines.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat intake manifolds is this rail compatible with?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis rail has been shown to mount to the PRB, RBC, and RBB intake manifolds without needing any modifications. Any aftermarket intake manifolds that share the same fuel rail mounting points as the PRB, RBC, or RBB should also accept this rail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBolt On K-series Engine Fuel Rail.\u003c\/li\u003e\n\u003cli\u003eAllows you to tuck your fuel lines.\u003c\/li\u003e\n\u003cli\u003e1\/8th npt port for fuel pressure gauge.\u003c\/li\u003e\n\u003cli\u003eNinja Black for the stealthy look.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hybrid Racing","offers":[{"title":"Black","offer_id":29175423041635,"sku":"HYB-FRL-01-16","price":404.2,"currency_code":"NZD","in_stock":true},{"title":"Red","offer_id":39798578741347,"sku":"HYB-FRL-01-17","price":404.2,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/afd96a2eb35aec61454c01d0ddb95d7e_2000x_26e6a4dc-0208-47af-af05-d6c8b13a0b79.jpg?v=1580788097"},{"product_id":"aem-380lph-high-pressure-external-fuel-pump-ethanol-compatible","title":"AEM External Fuel Pumps","description":"\u003cp\u003eThe AEM 380lph High Flow, High Pressure Fuel Pump for high performance naturally aspirated and forced induction EFI vehicles. The High Flow, High Pressure Fuel Pump can be installed externally or in-tank using optional hardware that is sold separately. It utilizes the industry standard “044 Style” envelope and -10 AN female inlet and -6 AN female outlet connections for easy installation on new applications and for quick replacement of existing competitor fuel pumps. The 50-1005 fuel pump delivers incredible performance and value.\u003cbr\u003e\u003cbr\u003eAEM’s 380lph High Flow, High Pressure Fuel Pump is capable of supporting over 1,200 HP normally aspirated and a whopping 1,075 HP at 30 psi boost!* It flows 380 lph (100 gph) at 43 PSI, 340 lph (90 gph) at 73 PSI, and 270 lph (71 gph) at 120 PSI. Complete flow curves from 35 to 120 PSI and current draw vs. fuel pressure charts are available in the specs tab.\u003cbr\u003e\u003cbr\u003eThe AEM 380lph High Flow Fuel Pump is designed for use with gasoline. Alcohol fuels can be used, but pump life will be diminished. The inlet thread is a -10 AN female ORB (O-ring port fitting) and the discharge is a female -6 AN ORB (O-ring port fitting).\u003cbr\u003e\u003cbr\u003eA male -6 to -8 AN discharge fitting with integral high pressure check valve, terminal nuts, terminal boots and installation instructions are included. Optional accessories that are sold separately include a -10 ORB fitting inlet pre-filter (for use with in-tank installations), and both -8 and -6 discharge adapters without integral check valves. Accessory fittings are hard anodized.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for high output naturally aspirated and forced induction EFI vehicles\u003c\/li\u003e\n\u003cli\u003ePopular “044 Style” physical configuration but with AN inlet \u0026amp; discharge port connections\u003c\/li\u003e\n\u003cli\u003eMaintains very high flow even at boosted fuel pressures; 340 lph @ 73 PSI (30 psi boost)\u003c\/li\u003e\n\u003cli\u003eInstalls externally or in-tank\u003c\/li\u003e\n\u003cli\u003eEach pump individually tested to flow minimum of 380lph (100gph) @ 43 PSI\u003c\/li\u003e\n\u003cli\u003eFor gasoline vehicles (pump life will be diminished when used with alcohol fuels)\u003c\/li\u003e\n\u003cli\u003eKit includes fuel pump, -6 to -8 male AN discharge fitting with check valve, terminal nuts \u0026amp; boots, instructions\u003c\/li\u003e\n\u003cli\u003eOptional -10 ORB fitting pre-filter, -6 and -8 discharge adapters without the integral check valves\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePower rating given using gasoline and assuming a base fuel pressure of 43 PSI, 13.5v at the pump with a BSFC of 0.5. Boost fuel pressure is assumed to be the base pressure of 43 PSI + boost pressure. Flow capability for horsepower support is ultimately dependent on fuel hose diameter, and system electrical voltage and amperage capabilities.\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Inlet -10, Outlet -6","offer_id":29175426416739,"sku":"aem50-1005","price":400.61,"currency_code":"NZD","in_stock":true},{"title":"Inlet m18x1.5, Outlet m12x1.5","offer_id":32646473056355,"sku":"aem50-1009","price":400.61,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/50-1005-6.jpg?v=1580875568"},{"product_id":"aem-320lph-in-take-fuel-pump-e85-compatible","title":"AEM 340LPH In Take Fuel Pump - E85 Compatible","description":"\u003cp\u003eAEM’s 340LPH E85-Compatible High Flow In-Tank Fuel Pumps feature robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels, and are tested to work with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline.\u003c\/p\u003e\n\u003cp\u003eThe AEM 340LPH E85-Compatible High Flow In-Tank Fuel Pump is designed for in-tank mounting on high performance naturally aspirated and forced induction vehicles. It features a compact 39mm diameter that fits most applications and an offset inlet design that eases installation.\u003c\/p\u003e\n\u003cp\u003eThe 340LPH E85-Compatible High Flow In-Tank fuel pump includes a wiring harness, pre filter, internal fuel hose, clamps, end cap and rubber buffer sleeve. Every AEM 340LPH E85-Compatible Fuel Pump is tested to flow 340 lph at 40 PSI before it is packaged for sale.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline\u003c\/li\u003e\n\u003cli\u003eDesigned for high output naturally aspirated and forced induction EFI vehicles\u003c\/li\u003e\n\u003cli\u003eIn tank design\u003c\/li\u003e\n\u003cli\u003eEach pump is tested to flow 340 lph @ 40 PSI\u003c\/li\u003e\n\u003cli\u003e39mm diameter fits most applications\u003c\/li\u003e\n\u003cli\u003eIncludes pre filter, hose, clamps, flying lead, end cap and rubber buffer sleeve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTECHNICAL SPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eWeight:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e12.5oz (354grams)\u003cbr\u003e\u003cstrong\u003eOutside Diameter:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e39mm OD\u003cbr\u003e\u003cstrong\u003eExternal Materials:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eBlack plated steel with laser etching, green end caps\u003cbr\u003e\u003cstrong\u003eInlet Fitting:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e7.7mm ID, 11.0mm OD. Offset Inline\u003cbr\u003e\u003cstrong\u003eOutlet Fitting:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e8 mm hose clamp. Offset\u003cbr\u003e\u003cstrong\u003ePRV Activation:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e80 PSI\u003cbr\u003e\u003cstrong\u003eImpeller Design:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSingle Scroll Ceramic Turbine\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVOLTAGE SPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eConnector Terminal:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e6 mm Spade (pos\/neg)\u003cbr\u003e\u003cstrong\u003eMin Voltage Input:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e6 volts\u003cbr\u003e\u003cstrong\u003eMax Voltage Input:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e18 volts\u003cbr\u003e\u003cstrong\u003eCurrent Draw (40 psi):\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e12 amps (13.5v)\u003cbr\u003e\u003cstrong\u003eCurrent Draw (80 psi):\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e15 amps (13.5v)\u003cbr\u003e\u003cstrong\u003eFuse:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e20 amps (13.5v)\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":29175430938723,"sku":"aem50-1200","price":309.12,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/50-1200-1-web.jpg?v=1614571453"},{"product_id":"jbr-throttle-body-methanol-injection-spacer-ms3-6","title":"JBR Throttle Body Methanol Injection Spacer - MS3\/6","description":"\n\u003cp\u003eNeed to reduce boost air temperatures? Want to prevent unwanted knock retard? Need to safely increase timing and increase HP? Then you need to spray meth!\u003c\/p\u003e\n\u003cp\u003eNow you no longer have to drill and tap your cold side piping or manifold. The *JBR Methanol Injection Throttle Body Spacer is quickly and easily installed between the throttle body and intake manifold and everything is included. It has 4, 1\/8\" NPT ports and can be equipped with up to 4 injector nozzles to meet the specific needs of your build.\u003c\/p\u003e\n\u003cp\u003eThe JBR Methanol Injection Throttle Body Spacer is CNC machined from 6061 aluminum then a beautiful black anodized coating is applied.\u003c\/p\u003e\n\u003cp\u003eAlso included is one of our Thermal Insulating Throttle body gaskets! This will help to further reduce boost air temperatures and makes the JBR Methanol Injection Spacer the best value on the market.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned and Manufactured in the USA\u003c\/li\u003e\n\u003cli\u003eBlack anodized finish for long-lasting corrosion-free protection\u003c\/li\u003e\n\u003cli\u003eThermal Insulating gasket included (No need to purchase an additional gasket)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe kit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1, Throttle Body Meth Injection Spacer\u003c\/li\u003e\n\u003cli\u003e1, Thermal insulating throttle body gasket ($25.00 value)\u003c\/li\u003e\n\u003cli\u003e4, Stainless 1\/8\" NPT hex plugs\u003c\/li\u003e\n\u003cli\u003e4, 6mm-1.0 x 75mm socket cap head bolts\u003c\/li\u003e\n\u003cli\u003e4, 6mm flat washers\u003c\/li\u003e\n\u003cli\u003eInstallation instructions are available in our support section\u003c\/li\u003e\n\u003cli\u003eHassle-Free Lifetime Warranty is included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Will require the cold side boost tube to be reduced by 17mm if running a top-mounted intercooler. No modification is typically required if running a front-mounted intercooler.\u003cbr\u003e **May not work with early model MS6 utilizing a top mount intercooler and straight coupler at the throttle body\u003c\/p\u003e","brand":"JBR","offers":[{"title":"Default Title","offer_id":29175449878627,"sku":"MS-INJ-SPCR","price":194.07,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/TB-INJ-SPCR.jpg?v=1580875986"},{"product_id":"skunk2-secondary-fuel-rail-ultra-race","title":"Skunk2 Secondary Fuel Rail - Ultra Race B Series","description":"\n\u003cp\u003eEngineers at Skunk2 Racing have developed primary and secondary fuel rails for the popular Ultra-Series Race intake manifold.\u003c\/p\u003e\n\u003cp\u003eSkunk2’s newest fuel rails are made from 6061-T6 aluminum, features large 0.669-inch internal bores and -8 AN o-ring thread, and can support up to 1,200hp each.\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175466492003,"sku":"skk350-05-6010","price":457.17,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/ultra-race-b-series-fuel-rail-a_1_1.jpg?v=1569190320"},{"product_id":"corksport-tokay-racing-injector-seals-ms3-6","title":"CorkSport Injector Seals - MS3\/6","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003eRunning factory power levels or seeking high HP numbers? Your fuel injectors work under extreme compression and combustion pressure. Don't let wasted power escape around that OEM excuse for a seal. Seriously, have you seen an OEM injector seal? Throw it out now. Get the CorkSport seal designed to deliver every horsepower to the ground where it belongs!\u003c\/p\u003e\n\u003cdiv\u003eOur new, improved injector seals will keep you running longer and surpassing others. They are an extremely cost-effective improvement, designed for 2006-2013 MZR DISI engines available in the Mazdaspeed 3 and Mazdaspeed 6.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Reliable beryllium copper cups allow proper crush sealing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cb\u003eSuperior design:\u003c\/b\u003e The groove and flared lip design allows the seal to crush into the cylinder head, sealing in the OEM location and against the side for superior sealing performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cb\u003eNo studs\u003c\/b\u003e are necessary because the clamping force does not need to be increased above factory specifications.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cspan style=\"color: #707372; font-family: 'Open Sans';\"\u003e \u003c\/span\u003e\u003cb\u003eAdditional Features\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eMade in the USA: \u003c\/b\u003eDesigned, engineered and produced in North America.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCommunity Collaboration:\u003c\/b\u003e These are the famous Tokay BeCuse designed V2 seals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLong-Term Development and Testing:\u003c\/b\u003e Check out our two-part blog series on the design and testing of the seals. Part #1 Part #2\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCorkSport service and support:\u003c\/b\u003e Includes a limited warranty, full colour installation instructions, and all necessary hardware. We provide knowledgeable telephone support at 360-260-2675.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty Details:\u003c\/b\u003e CorkSport offers a limited warranty on the injector seals to be free from manufacturing defects for 90 days. The seals are designed to be installed once and CorkSport will not guarantee removal and subsequent reinstallation. Installation errors of the injector seals are not covered. Please note for warranty considerations the seals will need to be returned to CorkSport for inspection before any replacement parts will be shipped out if applicable. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ciframe width=\"1280\" height=\"720\" src=\"https:\/\/www.youtube.com\/embed\/U6GWyYp5LCQ\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"CorkSport","offers":[{"title":"Default Title","offer_id":29175491985507,"sku":"Gen-6-991-10","price":404.2,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Injector-Seal-Set-MZR-700x465.jpg?v=1580876334"},{"product_id":"hybrid-racing-k-series-fuel-rail-fittings-fd-civic","title":"Hybrid Racing K-Series Fuel Rail \u0026 Fittings FD Civic","description":"\u003cp\u003e\u003cstrong\u003eHybrid Racing K-Series Fuel Rail \u0026amp; Fittings FD Civic\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHybrid Racing fuel rails are made from 6061 aluminium with T6 heat treatment and features a durable anodised finish with a laser etched logo ensuring that your engine bay looks fresh and your engine stays fed!\u003c\/p\u003e\n\u003cp\u003eEach rail includes a 1\/8\" NPT hole that allow you to mount a fuel pressure gauge directly to your fuel rail. This puts the fuel pressure gauge in a spot that's easily visible, so you don't have to poke around in the engine bay just to see if you have fuel pressure. All of the ports can accept a -8 ORB fitting in the inlet(s) and outlet allowing you to run either -6 or -8 AN fuel lines.\u003c\/p\u003e\n\u003cp\u003eThe other detail that should stand out is the option for plugging the side inlet and outlet to allow you to run your fuel line to a centrally located -8 ORB fitting. This is positioned so that the fuel line can pass between the middle two cylinder intake runners (depending on your intake manifold.) This is an excellent option for anyone looking to tuck their wires and lines.\u003c\/p\u003e\n\u003cp\u003eWhat intake manifolds is this rail compatible with?\u003c\/p\u003e\n\u003cp\u003eThis rail has been shown to mount to the PRB, RBC, and RBB intake manifolds without needing any modifications. Any aftermarket intake manifolds that share the same fuel rail mounting points as the PRB, RBC, or RBB should also accept this rail.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat's included:\u003cbr\u003e \u003c\/b\u003e(1) K-Series Fuel Rail\u003cbr\u003e (1) Push-On EFI Fitting\u003cbr\u003e (2) -8 ORB Plug\u003cbr\u003e (1) 1\/8th NPT Plug\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBolt On K-series Engine Fuel Rail.\u003c\/li\u003e\n\u003cli\u003eAllows you to tuck your fuel lines.\u003c\/li\u003e\n\u003cli\u003e1\/8th npt port for fuel pressure gauge.\u003c\/li\u003e\n\u003cli\u003eNinja Black for the stealthy look.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hybrid Racing","offers":[{"title":"Black","offer_id":29175505977443,"sku":"HYB-FRL-01-10","price":404.2,"currency_code":"NZD","in_stock":true},{"title":"Red","offer_id":39798577528931,"sku":"HYB-FRL-01-11","price":404.2,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/8b96172b07e4b87f54bfb5f72ca2f43a_2000x_892f58a4-0bdf-43b4-b753-c485c62d4c8f.jpg?v=1580788647"},{"product_id":"epman-fuel-rail-adaptor-external-regulator","title":"EPMAN Fuel Rail Adaptor - External Regulator","description":"\u003cp\u003e\u003cstrong\u003eEPMAN Honda Fuel Rail Adaptor – External Regulator\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eFuel Regulator Delivery Adapter. Make your installation quicker and easier.\u003c\/p\u003e\n\u003cp\u003eManufactured using aluminum alloys that meet or exceed minimum requirements for hose fittings. Each component is precision-machined to exact tolerances for trouble-free performance.\u003c\/p\u003e\n\u003cp\u003e2 options available - adjustable and non adjustable.\u003c\/p\u003e\n\u003cdiv\u003e\u003cb\u003eKit includes:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e1pc Fuel Delivery Adaptor (Fuel Regulator Adaptor)\u003c\/div\u003e\n\u003cdiv\u003eMade of Black anodised Aluminum for the adjustable adaptor or blue for the non adjustable adaptor.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cem\u003e\u003cstrong\u003ePlease note this is an entry level budget product which is reflected in its pricing. Small burrs and scratches or lack in overall quality are not considered grounds for refund. Please opt for a higher quality brand if this is going to be an issue for your build.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/div\u003e","brand":"EPMAN","offers":[{"title":"Yes","offer_id":29175508369507,"sku":"TK-OL6350","price":35.05,"currency_code":"NZD","in_stock":true},{"title":"No","offer_id":40491182194787,"sku":"TK-OL6350N","price":29.1,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/HTB1tMlCRXXXXXauXFXXq6xXFXXX0.jpg?v=1580788666"},{"product_id":"hybrid-racing-k-swap-fuel-line-kit-hybrid-filter","title":"Hybrid Racing K-Swap Fuel Line Kit w' Hybrid Fuel Filter - EG\/EK\/DC","description":"\n\u003cp\u003eThe Hybrid Racing Tucked fuel line kit was designed for those people looking to clean up their engine bay and eliminate the OEM fuel filter off of the firewall.\u003c\/p\u003e\n\u003cp\u003eThe kit routes the fuel lines between the number 2 and number 3 runners and hugs the transmission as it makes its way to the regulator which you will mount below the brake booster.\u003c\/p\u003e\n\u003cp\u003eThis kit only works with the Hybrid Racing Fuel rail which has the necessary port in the center of the rail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003eBlack Hybrid Racing Inline Filter Included\u003c\/li\u003e\n\u003cli\u003eFuel Line Kit for K-Series Conversions in EG\/EK\/DC Chassis.\u003c\/li\u003e\n\u003cli\u003e-6AN stainless lines with all necessary fittings.\u003c\/li\u003e\n\u003cli\u003ePressure Tested and Assembled by Aeromotive Authorized Dealer.\u003c\/li\u003e\n\u003cli\u003eHybrid Racing Money Back Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do you need a fuel line kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eK-Series engines are normally are supplied with return-less fuel systems, meaning the fuel pressure regulator is inside of the fuel tank and has only one line leading to the engine. In most cases, the chassis that you plan on installing your K series engine (in this case EG, EK, DC) utilizes a return system. In order to have the engine run correctly, you will need to convert the K-Series engine to a return system. Although there is only one line going to the rail, this kit is still a return type system since the pressure is still regulated before it goes back to the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat chassis is this kit for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit fits: 92-00 Civic \/ Del Sol \u0026amp; 93-00 Acura Integra\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does this kit come with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFour lines, adapter fittings and an inline fuel filter. The lines are only offered in black nylon.\u003cbr\u003e We stand behind each one of our products and are 100% positive that you will have no problems with our fuel line kits.\u003c\/p\u003e\n\u003cp\u003eEach Hybrid Racing product comes with a money back guarantee.\u003c\/p\u003e","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":29175545593955,"sku":"HYB-FLK-01-06","price":446.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/FLK_T_1_2000x_631c2fd4-4f45-472c-b6a2-b79e007d377f.png?v=1612832944"},{"product_id":"grams-fuel-pressure-regulator","title":"Grams Performance - Fuel Pressure Regulator","description":"\n\u003cp\u003eControl your fuel system with the Grams Performance fuel pressure regulator. These regulators feature a black anodized top and high quality 6061 hard-anodised aluminium bottom. At the heart of the regulator is a durable custom diaphragm, a stainless steel internal orifice, and a high-pressure spring that allows for pressure adjustment ranging from 30 - 118 psi (2 – 8 bar). Each regulator features two AN -10 ORB inlets, one AN -06 ORB outlet, boost\/vacuum port, gauge port and provisions for a mounting bracket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e30 - 118 psi (2 – 8 bar). pressure range\u003c\/li\u003e\n\u003cli\u003eTwo Inlets at AN -10 ORB\u003c\/li\u003e\n\u003cli\u003eOne outlet\/return at AN -06 ORB\u003c\/li\u003e\n\u003cli\u003e1\/8” (3.175mm) NPT boost\/vacuum port\u003c\/li\u003e\n\u003cli\u003e1:1 Boost\/vacuum rise ratio\u003c\/li\u003e\n\u003cli\u003e6061 Hard anodized aluminum\u003c\/li\u003e\n\u003cli\u003eBlack anodized top\u003c\/li\u003e\n\u003cli\u003eCompatible with all fuel types\u003c\/li\u003e\n\u003cli\u003eRebuildable internals\u003c\/li\u003e\n\u003cli\u003eM6 x 1.0 Mounting location size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDID YOU KNOW?\u003cbr\u003e Grams Performance regulators are designed with simplicity and practicality in mind: a hard-anodised aluminum bottom allows for all fuel types to flow freely through the diaphragm.\u003c\/p\u003e","brand":"Grams Performance","offers":[{"title":"Default Title","offer_id":29175553163363,"sku":"grpG60-99-0000","price":315.6,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/g2-99-0000_gp_00.png?v=1569190327"},{"product_id":"k-tuned-hi-flow-fuel-filter-brackets","title":"K-Tuned Hi Flow Fuel Filter Brackets","description":"\n\u003cp\u003eDesign specifically for the new K-tuned high flow fuel filters.\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":29175563419747,"sku":"KTD-MFF-8K","price":46.29,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/KTD-MFF_HighFlowFuelFilter8AN10AN_4.jpg?v=1580789025"},{"product_id":"gfb-fx-s-fuel-pressure-regulator","title":"GFB FX-S Fuel Pressure Reg - 1:1 Rising Rate 800hp 1\/8NPT on all 5 Ports","description":"\n\u003cp\u003eThe FX-S offers multiple fuel inlet and gauge ports that allow for a wide range of fuel system setups beyond the usual inlet\/outlet, including parallel fuel rail or returnless “deadhead” systems. The two gauge ports allow you to run a mechanical fuel pressure gauge AND an ECU fuel pressure sensor if you want to.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1:1 fuel pressure rise rate\u003c\/li\u003e\n\u003cli\u003eDouble layer\/double reinforced diaphragms with a burst strength exceeding 1000psi\u003c\/li\u003e\n\u003cli\u003eTeflon co-polymer seat with stainless valve to retain fuel pressure longer after shut down\u003c\/li\u003e\n\u003cli\u003eSpring pre-load adjustment screw is o-ring sealed and does not leak vacuum\/boost\u003c\/li\u003e\n\u003cli\u003eStatic pressures adjustable from 28psi to 72psi\u003c\/li\u003e\n\u003cli\u003eCompletely serviceable\u003c\/li\u003e\n\u003cli\u003eMultiple body ports allow for a large variety of setup options\u003c\/li\u003e\n\u003cli\u003e4x 1\/8” NPT ports which can be used for any combination of fuel inlet\/s or pressure gauge\/ECU sensor, and 1x 1\/8” NPT return port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFrom the 800Hp FX-S Street to the 1500Hp FX-R Race version, and whether you run pump petrol\/gasoline, Ethanol, Methanol or Diesel, GFB have you covered no matter what your Fuel Pressure Regulator requirements are.\u003c\/p\u003e\n\u003cp\u003eGo Fast Bits have incorporated a softer, more compliant yet resilient material for the valve seat, which will always positively seal and hold fuel pressure on shut down, designed to give factory-like sealing and reliable startup, as well as superior fuel resistance suitable for Unleaded, Ethanol, Methanol, and Diesel fuels.  They also use a double layer diaphragm, which means we have twice the reinforcing material, and as a result the burst strength exceeds 1000psi!\u003c\/p\u003e","brand":"Go Fast Bits","offers":[{"title":"Default Title","offer_id":29175571546211,"sku":"GFB-8050","price":362.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/GFB-FX-S.jpg?v=1580877451"},{"product_id":"radium-fst-surge-tank-mounting-brackets","title":"Radium FST Surge Tank Mounting Brackets","description":"\u003cp\u003e\u003cstrong\u003eFloor and Wall Mount\u003c\/strong\u003e - This bracket is laser cut from aluminium and powder-coated black and can be mounted on the side or bottom of the surge tank.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrame Mount\u003c\/strong\u003e - Because this bracket has a 90deg formed bend and is cantilevered, it is constructed from steel for superior strength. It is not only nickel plated to resist corrosion, it also allows for components to be grounded to the spare hole in the bracket. This assumes the bracket is mounted to an electrically conductive material such as a steel frame.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAngled Mount\u003c\/strong\u003e - This mounting bracket is used for vehicles that may have a limited mounting height. It can be mounted on a floor and against a wall. This bracket is made from laser-cut aluminium and powder-coated black.\u003c\/p\u003e\n\u003cp\u003eClick \u003ca href=\"http:\/\/data.radiumauto.com\/PublicDocs\/FST_DIMENSIONS.PDF\"\u003eHERE\u003c\/a\u003e for mounting dimensions\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Fram Rail Mount","offer_id":29175599136867,"sku":"rad13-0011","price":66.91,"currency_code":"NZD","in_stock":true},{"title":"Angled Mount","offer_id":29175599169635,"sku":"rad13-0029","price":103.08,"currency_code":"NZD","in_stock":true},{"title":"Wall\/Floor Mount","offer_id":29175599104099,"sku":"rad13-0054","price":41.17,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/FSTmounts.jpg?v=1580877656"},{"product_id":"vibrant-black-nylon-flex-hose-10-foot-roll","title":"Vibrant Black Nylon Flex Hose - 10 Foot Roll","description":"\n\u003cp\u003eVibrant Performance offers a range or Braided Synthetic Rubber Hose manufactured to withstand the demands of the motorsports industry. These hoses are available in a Black Braided Nylon Cover that is lightweight and durable.\u003c\/p\u003e\n\u003cp\u003eVibrant Performance Braided Flex Hoses are suitable for use with oil, water, fuel, coolant and vacuum and are capable of handling temperatures ranging from -40 deg F to 300 deg F and elevated operating pressures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack Braided Nylon Cover\u003c\/li\u003e\n\u003cli\u003eLightweight and Durable\u003c\/li\u003e\n\u003cli\u003eSuitable for use with Oil, Water, Fuel and Coolant\u003c\/li\u003e\n\u003cli\u003eCapable of handling operating temperatures ranging from -40 deg F to 300 deg F and elevated operating pressure of 500psi.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eE85 Compatible\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vibrant Performance","offers":[{"title":"-4","offer_id":29175599235171,"sku":"vib11964","price":151.99,"currency_code":"NZD","in_stock":true},{"title":"-6","offer_id":29175599267939,"sku":"vib11966","price":163.51,"currency_code":"NZD","in_stock":true},{"title":"-8","offer_id":29175599300707,"sku":"vib11968","price":184.24,"currency_code":"NZD","in_stock":true},{"title":"-10","offer_id":29175599333475,"sku":"vib11970","price":216.48,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/11954_WEBL.jpg?v=1580877658"},{"product_id":"grams-1600cc-nissan-r32-r34-rb26-top-feed-only-14mm-injectors","title":"Grams Performance 1600cc Nissan R32, R34, RB26 Top Feed Only 14mm","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eGrams Performance offers innovative, high-performance fuel injectors for today's vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch¨ injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths.\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eGrams 1600cc injectors feature stainless internals and compatible with all fuels including oxygenated fuel with MTBE. Compatible with all fuels including FTW, Q16, M5, C45 etc\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES \u0026amp; BENEFITS:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with all known fuels including gasoline, methanol, and ethanol\u003c\/li\u003e\n\u003cli\u003eFlowed and balanced to within 1% for consistency\u003c\/li\u003e\n\u003cli\u003ePrecise fuel metering up to 118 psi (8 bar)\u003c\/li\u003e\n\u003cli\u003ePressure tested up to 220 psi (15.16 bar)\u003c\/li\u003e\n\u003cli\u003eLightweight valve needle and ultra-fast solenoid\u003c\/li\u003e\n\u003cli\u003eImproved atomization for greater combustion efficiency and reduced emissions\u003c\/li\u003e\n\u003cli\u003eLeak-free operation and optimal performance\u003c\/li\u003e\n\u003cli\u003eHigh-impedance design (no resistor box required)\u003c\/li\u003e\n\u003cli\u003eOver-molded one-piece design for added reliability and simplicity.\u003c\/li\u003e\n\u003cli\u003eMade from Bosch¨ EV14 Standard housing\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement\u003c\/li\u003e\n\u003cli\u003eComes with injector latency data to accurately set up aftermarket ECU\u003c\/li\u003e\n\u003cli\u003eEV6-USCAR electrical connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e6 Injectors\u003c\/p\u003e","brand":"Grams Performance","offers":[{"title":"Default Title","offer_id":29175603003491,"sku":"grpG2-1600-0705","price":2931.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/1600_standing_9.jpg?v=1569190332"},{"product_id":"speed-science-fuel-rail-adaptor-honda","title":"Speed Science Fuel Rail Adaptor - Honda","description":"","brand":"Speed Science","offers":[{"title":"Default Title","offer_id":29175604019299,"sku":"SS-RAILADAPT-HONDA","price":15.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/ss_place_b13ca054-4aa8-4fc5-87f0-13139a7d8b15.gif?v=1571722587"},{"product_id":"grams-1150cc-00-05-s2000-injector-kit","title":"Grams Performance 1150cc Injectors - S2000 00-05","description":"\u003cp\u003eGrams Performance offers innovative, high-performance fuel injectors for today's vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch¨ injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eGrams 2200cc injectors feature stainless internals and compatible with all fuels including oxygenated fuel with MTBE. Compatible with all fuels including FTW, Q16, M5, C45 etc\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES \u0026amp; BENEFITS:\u003c\/strong\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with all known fuels including gasoline, methanol, and ethanol\u003c\/li\u003e\n\u003cli\u003eFlowed and balanced to within 1% for consistency\u003c\/li\u003e\n\u003cli\u003ePrecise fuel metering up to 118 psi (8 bar)\u003c\/li\u003e\n\u003cli\u003ePressure tested up to 220 psi (15.16 bar)\u003c\/li\u003e\n\u003cli\u003eLightweight valve needle and ultra-fast solenoid\u003c\/li\u003e\n\u003cli\u003eImproved atomization for greater combustion efficiency and reduced emissions\u003c\/li\u003e\n\u003cli\u003eLeak-free operation and optimal performance\u003c\/li\u003e\n\u003cli\u003eHigh-impedance design (no resistor box required)\u003c\/li\u003e\n\u003cli\u003eOver-molded one-piece design for added reliability and simplicity.\u003c\/li\u003e\n\u003cli\u003eMade from Bosch¨ EV14 Standard housing\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement\u003c\/li\u003e\n\u003cli\u003eComes with injector latency data to accurately set up aftermarket ECU\u003c\/li\u003e\n\u003cli\u003eEV6-USCAR electrical connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grams Performance","offers":[{"title":"Default Title","offer_id":29175606411363,"sku":"grpG2-1150-0502","price":1255.93,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/800x800_1150cc_0501_1.jpg?v=1569190332"},{"product_id":"grams-1150cc-toyota-2jz-turbo-injector-kit","title":"Grams Performance 1150cc Toyota 2JZ Turbo","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eGrams Performance offers innovative, high-performance fuel injectors for today's vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch¨ injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths.\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eGrams 1150cc injectors feature stainless internals and compatible with all fuels including oxygenated fuel with MTBE. Compatible with all fuels including FTW, Q16, M5, C45 etc\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES \u0026amp; BENEFITS:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with all known fuels including gasoline, methanol, and ethanol\u003c\/li\u003e\n\u003cli\u003eFlowed and balanced to within 1% for consistency\u003c\/li\u003e\n\u003cli\u003ePrecise fuel metering up to 118 psi (8 bar)\u003c\/li\u003e\n\u003cli\u003ePressure tested up to 220 psi (15.16 bar)\u003c\/li\u003e\n\u003cli\u003eLightweight valve needle and ultra-fast solenoid\u003c\/li\u003e\n\u003cli\u003eImproved atomization for greater combustion efficiency and reduced emissions\u003c\/li\u003e\n\u003cli\u003eLeak-free operation and optimal performance\u003c\/li\u003e\n\u003cli\u003eHigh-impedance design (no resistor box required)\u003c\/li\u003e\n\u003cli\u003eOver-molded one-piece design for added reliability and simplicity.\u003c\/li\u003e\n\u003cli\u003eMade from Bosch¨ EV14 Standard housing\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement\u003c\/li\u003e\n\u003cli\u003eComes with injector latency data to accurately set up aftermarket ECU\u003c\/li\u003e\n\u003cli\u003eEV6-USCAR electrical connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e6 Injectors\u003c\/p\u003e","brand":"Grams Performance","offers":[{"title":"Default Title","offer_id":29175606476899,"sku":"grpG2-1150-0801","price":1939.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/800_1150_injectors_kit_11.jpg?v=1569190332"},{"product_id":"grams-1600cc-mitsubishi-evo-1-9","title":"Grams Performance 1600cc Mitsubishi Evo 1-9","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eGrams Performance offers innovative, high-performance fuel injectors for today's vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch¨ injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths.\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eGrams 1600cc injectors feature stainless internals and compatible with all fuels including oxygenated fuel with MTBE. Compatible with all fuels including FTW, Q16, M5, C45 etc\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES \u0026amp; BENEFITS:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with all known fuels including gasoline, methanol, and ethanol\u003c\/li\u003e\n\u003cli\u003eFlowed and balanced to within 1% for consistency\u003c\/li\u003e\n\u003cli\u003ePrecise fuel metering up to 118 psi (8 bar)\u003c\/li\u003e\n\u003cli\u003ePressure tested up to 220 psi (15.16 bar)\u003c\/li\u003e\n\u003cli\u003eLightweight valve needle and ultra-fast solenoid\u003c\/li\u003e\n\u003cli\u003eImproved atomization for greater combustion efficiency and reduced emissions\u003c\/li\u003e\n\u003cli\u003eLeak-free operation and optimal performance\u003c\/li\u003e\n\u003cli\u003eHigh-impedance design (no resistor box required)\u003c\/li\u003e\n\u003cli\u003eOver-molded one-piece design for added reliability and simplicity.\u003c\/li\u003e\n\u003cli\u003eMade from Bosch¨ EV14 Standard housing\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement\u003c\/li\u003e\n\u003cli\u003eComes with injector latency data to accurately set up aftermarket ECU\u003c\/li\u003e\n\u003cli\u003eEV6-USCAR electrical connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grams Performance","offers":[{"title":"Default Title","offer_id":29175607033955,"sku":"grpG2-1600-0600","price":1954.65,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/1600_standing_26.jpg?v=1569190332"},{"product_id":"grams-1600cc-240sx-s13-s14-s15-sr20-top-feed-11mm-injector-kit","title":"Grams Performance 1600cc S13, S14, S15, SR20, G20 Top Feed 11mm","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eGrams Performance offers innovative, high-performance fuel injectors for today's vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch¨ injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths.\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eGrams 1600cc injectors feature stainless internals and compatible with all fuels including oxygenated fuel with MTBE. Compatible with all fuels including FTW, Q16, M5, C45 etc\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES \u0026amp; BENEFITS:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with all known fuels including gasoline, methanol, and ethanol\u003c\/li\u003e\n\u003cli\u003eFlowed and balanced to within 1% for consistency\u003c\/li\u003e\n\u003cli\u003ePrecise fuel metering up to 118 psi (8 bar)\u003c\/li\u003e\n\u003cli\u003ePressure tested up to 220 psi (15.16 bar)\u003c\/li\u003e\n\u003cli\u003eLightweight valve needle and ultra-fast solenoid\u003c\/li\u003e\n\u003cli\u003eImproved atomization for greater combustion efficiency and reduced emissions\u003c\/li\u003e\n\u003cli\u003eLeak-free operation and optimal performance\u003c\/li\u003e\n\u003cli\u003eHigh-impedance design (no resistor box required)\u003c\/li\u003e\n\u003cli\u003eOver-molded one-piece design for added reliability and simplicity.\u003c\/li\u003e\n\u003cli\u003eMade from Bosch¨ EV14 Standard housing\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement\u003c\/li\u003e\n\u003cli\u003eComes with injector latency data to accurately set up aftermarket ECU\u003c\/li\u003e\n\u003cli\u003eEV6-USCAR electrical connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grams Performance","offers":[{"title":"Default Title","offer_id":29175607296099,"sku":"grpG2-1600-0707","price":1954.65,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/1600_standing_26_ec40b4b6-24d7-4b45-b697-00eafb1f5070.jpg?v=1569190332"},{"product_id":"grams-1600cc-00-05-s2000-ap1-injector-kit","title":"Grams Performance 1600cc 00-05 S2000 (AP1\/F20C)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eGrams Performance offers innovative, high-performance fuel injectors for today's vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch¨ injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths.\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eGrams 1600cc injectors feature stainless internals and compatible with all fuels including oxygenated fuel with MTBE. Compatible with all fuels including FTW, Q16, M5, C45 etc\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES \u0026amp; BENEFITS:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with all known fuels including gasoline, methanol, and ethanol\u003c\/li\u003e\n\u003cli\u003eFlowed and balanced to within 1% for consistency\u003c\/li\u003e\n\u003cli\u003ePrecise fuel metering up to 118 psi (8 bar)\u003c\/li\u003e\n\u003cli\u003ePressure tested up to 220 psi (15.16 bar)\u003c\/li\u003e\n\u003cli\u003eLightweight valve needle and ultra-fast solenoid\u003c\/li\u003e\n\u003cli\u003eImproved atomization for greater combustion efficiency and reduced emissions\u003c\/li\u003e\n\u003cli\u003eLeak-free operation and optimal performance\u003c\/li\u003e\n\u003cli\u003eHigh-impedance design (no resistor box required)\u003c\/li\u003e\n\u003cli\u003eOver-molded one-piece design for added reliability and simplicity.\u003c\/li\u003e\n\u003cli\u003eMade from Bosch¨ EV14 Standard housing\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement\u003c\/li\u003e\n\u003cli\u003eComes with injector latency data to accurately set up aftermarket ECU\u003c\/li\u003e\n\u003cli\u003eEV6-USCAR electrical connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grams Performance","offers":[{"title":"Default Title","offer_id":29175607328867,"sku":"grpG2-1600-0502","price":1954.65,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/1600_standing_26_a80071f1-80ff-48ef-b34d-0a0e477499d7.jpg?v=1569190332"},{"product_id":"grams-1600cc-toyota-2jz-turbo-injector-kit","title":"Grams Performance 1600cc Toyota 2JZ Turbo","description":"\u003cp\u003eGrams Performance offers innovative, high-performance fuel injectors for today's vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch¨ injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eGrams 1600cc injectors feature stainless internals and compatible with all fuels including oxygenated fuel with MTBE. Compatible with all fuels including FTW, Q16, M5, C45 etc\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES \u0026amp; BENEFITS:\u003c\/strong\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with all known fuels including gasoline, methanol, and ethanol\u003c\/li\u003e\n\u003cli\u003eFlowed and balanced to within 1% for consistency\u003c\/li\u003e\n\u003cli\u003ePrecise fuel metering up to 118 psi (8 bar)\u003c\/li\u003e\n\u003cli\u003ePressure tested up to 220 psi (15.16 bar)\u003c\/li\u003e\n\u003cli\u003eLightweight valve needle and ultra-fast solenoid\u003c\/li\u003e\n\u003cli\u003eImproved atomization for greater combustion efficiency and reduced emissions\u003c\/li\u003e\n\u003cli\u003eLeak-free operation and optimal performance\u003c\/li\u003e\n\u003cli\u003eHigh-impedance design (no resistor box required)\u003c\/li\u003e\n\u003cli\u003eOver-molded one-piece design for added reliability and simplicity.\u003c\/li\u003e\n\u003cli\u003eMade from Bosch¨ EV14 Standard housing\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement\u003c\/li\u003e\n\u003cli\u003eComes with injector latency data to accurately set up aftermarket ECU\u003c\/li\u003e\n\u003cli\u003eEV6-USCAR electrical connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e6 Injectors\u003c\/p\u003e","brand":"Grams Performance","offers":[{"title":"Default Title","offer_id":29175607394403,"sku":"grpG2-1600-0801","price":2931.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/1600_standing_26_e8643bd7-1699-4400-8626-a7a43dbd706b.jpg?v=1569190332"},{"product_id":"grams-550cc-toyota-2jz-turbo-injector-kit","title":"Grams Performance 550cc Toyota 2JZ Turbo","description":"\u003cp\u003eGrams Performance offers innovative, high-performance fuel injectors for today's vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch¨ injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eGrams Performance 550cc fuel injectors are chosen by professional motorsports and performance enthusiasts because of their quality, consistency, value, and ease of use. They were designed primarily to be used with gasoline based fuels, however, may be used with alcohol based fuels with the understanding that the fuel system must be regularly flushed out and stored with gasoline to minimize flow losses associated with the use of alcohol on a consistent basis. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES \u0026amp; BENEFITS:\u003c\/strong\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with all known fuels including gasoline, methanol, and ethanol\u003c\/li\u003e\n\u003cli\u003eFlowed and balanced to within 1% for consistency\u003c\/li\u003e\n\u003cli\u003ePrecise fuel metering up to 118 psi (8 bar)\u003c\/li\u003e\n\u003cli\u003ePressure tested up to 220 psi (15.16 bar)\u003c\/li\u003e\n\u003cli\u003eLightweight valve needle and ultra-fast solenoid\u003c\/li\u003e\n\u003cli\u003eImproved atomization for greater combustion efficiency and reduced emissions\u003c\/li\u003e\n\u003cli\u003eLeak-free operation and optimal performance\u003c\/li\u003e\n\u003cli\u003eHigh-impedance design (no resistor box required)\u003c\/li\u003e\n\u003cli\u003eOver-molded one-piece design for added reliability and simplicity.\u003c\/li\u003e\n\u003cli\u003eMade from Bosch¨ EV14 Standard housing\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement\u003c\/li\u003e\n\u003cli\u003eComes with injector latency data to accurately set up aftermarket ECU\u003c\/li\u003e\n\u003cli\u003eEV6-USCAR electrical connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e6 Injectors\u003c\/p\u003e","brand":"Grams Performance","offers":[{"title":"Default Title","offer_id":29175607459939,"sku":"grpG2-0550-0801","price":1221.65,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/550-injectors_29.jpg?v=1580789271"},{"product_id":"grams-550cc-nissan-240sx-s13-s14-s15-sr20-top-feed-11mm-injector-kit","title":"Grams Performance 550cc S13, S14, S15, SR20, G20 Top Feed 11mm","description":"\u003cp\u003eGrams Performance offers innovative, high-performance fuel injectors for today's vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch¨ injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eGrams Performance 550cc fuel injectors are chosen by professional motorsports and performance enthusiasts because of their quality, consistency, value, and ease of use. They were designed primarily to be used with gasoline based fuels, however, may be used with alcohol based fuels with the understanding that the fuel system must be regularly flushed out and stored with gasoline to minimize flow losses associated with the use of alcohol on a consistent basis. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES \u0026amp; BENEFITS:\u003c\/strong\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with all known fuels including gasoline, methanol, and ethanol\u003c\/li\u003e\n\u003cli\u003eFlowed and balanced to within 1% for consistency\u003c\/li\u003e\n\u003cli\u003ePrecise fuel metering up to 118 psi (8 bar)\u003c\/li\u003e\n\u003cli\u003ePressure tested up to 220 psi (15.16 bar)\u003c\/li\u003e\n\u003cli\u003eLightweight valve needle and ultra-fast solenoid\u003c\/li\u003e\n\u003cli\u003eImproved atomization for greater combustion efficiency and reduced emissions\u003c\/li\u003e\n\u003cli\u003eLeak-free operation and optimal performance\u003c\/li\u003e\n\u003cli\u003eHigh-impedance design (no resistor box required)\u003c\/li\u003e\n\u003cli\u003eOver-molded one-piece design for added reliability and simplicity.\u003c\/li\u003e\n\u003cli\u003eMade from Bosch¨ EV14 Standard housing\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement\u003c\/li\u003e\n\u003cli\u003eComes with injector latency data to accurately set up aftermarket ECU\u003c\/li\u003e\n\u003cli\u003eEV6-USCAR electrical connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grams Performance","offers":[{"title":"Default Title","offer_id":29175607492707,"sku":"grpG2-0550-0707","price":823.38,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/550-injectors_29_50b41078-74af-45c2-91a1-bbd5f0c5a915.jpg?v=1580789273"},{"product_id":"grams-fuel-filter-100-micron-w-10-an","title":"Grams Performance Fuel Filter - 100 Micron w\/ -10 AN","description":"\n\u003cp\u003eThe compact aluminum casing design of our fuel filters paired with a 100 micron element is sure to provide a solution to keep your system clean and flowing freely! Grams fuel filters help keep your valuable fuel injectors clean and performing at their peak with minimal pressure drop. The stainless steel filter has 60 square inches of surface area to trap dirt, rust or other foreign particles from damaging critical components of your fuel injection system.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cb\u003eFeatures:\u003cbr\u003e \u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003e100 Micron Stainless Steel Filter\u003c\/li\u003e\n\u003cli\u003e60 Square Inches of Surface Area\u003c\/li\u003e\n\u003cli\u003eFree Flowing Radiused End-Caps w\/ -10 AN Fittings\u003c\/li\u003e\n\u003cli\u003eLess Than 0.7 psi Pressure Drop\u003c\/li\u003e\n\u003cli\u003eCorrosion Resistant Hard Anodized Aluminum Casing\u003c\/li\u003e\n\u003cli\u003eCompatible w\/ All Fuel Types\u003c\/li\u003e\n\u003cli\u003eCompatible w\/ EFI or Carburation compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWe highly recommend installing the 100-micron filter before the fuel pump and the 20-micron filter the pump or before the fuel injectors. Filtering the fuel before and after the fuel pump will ensure greater protection for your fuel injection system and safeguard your injectors.\u003c\/div\u003e","brand":"Grams Performance","offers":[{"title":"Default Title","offer_id":29175607558243,"sku":"grpG60-99-0100","price":218.84,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/grp_2179_1.jpg?v=1580877877"},{"product_id":"grams-fuel-filter-20-micron-w-6-an","title":"Grams Performance Fuel Filter - 20 Micron w\/ -6 AN","description":"\n\u003cp\u003eThe compact aluminum casing design of our fuel filters paired with a 20 micron element is sure to provide a solution to keep your system clean and flowing freely! Grams fuel filters help keep your valuable fuel injectors clean and performing at their peak with minimal pressure drop. The stainless steel filter has 60 square inches of surface area to trap dirt, rust or other foreign particles from damaging critical components of your fuel injection system.\u003cb\u003e \u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003e20 Micron Stainless Steel Filter\u003c\/li\u003e\n\u003cli\u003e60 Square Inches of Surface Area\u003c\/li\u003e\n\u003cli\u003eFree Flowing Radiused End-Caps w\/ -6 AN Fittings\u003c\/li\u003e\n\u003cli\u003eLess Than 1.1 psi Pressure Drop\u003c\/li\u003e\n\u003cli\u003eCorrosion Resistant Hard Anodized Aluminum Casing\u003c\/li\u003e\n\u003cli\u003eCompatible w\/ All Fuel Types\u003c\/li\u003e\n\u003cli\u003eCompatible w\/ EFI or Carburation compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe highly recommend installing the 100-micron filter before the fuel pump and the 20-micron filter the pump or before the fuel injectors. Filtering the fuel before and after the fuel pump will ensure greater protection for your fuel injection system and safeguard your injectors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eNote: \u003c\/strong\u003eThis is a special order product, please allow up to 3 weeks for delivery.\u003c\/div\u003e","brand":"Grams Performance","offers":[{"title":"Default Title","offer_id":29175607591011,"sku":"grpG60-99-0026","price":218.84,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/grp_2179_1_70085256-f0ab-4673-ae05-719be6558bc0.jpg?v=1580877889"},{"product_id":"grams-fuel-pressure-gauge-0-30psi","title":"Grams Performance Fuel Pressure Gauge - 0-30psi","description":"\n\u003cp\u003eCompliment your Grams Performance fuel pressure regulator with the all so important fuel pressure gauge! This easy to read, matte black stainless steel gauge measures 0-30 psi (2.06 bar) and is silicone filled to accommodate high vibration applications. While adjusting the regulator, the Grams Fuel Pressure Gauge will provide you an accurate fuel pressure reading at a glance.\u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e0 - 30 psi Pressure Range for Electronic Fuel Injection\u003c\/li\u003e\n\u003cli\u003eEasy to Read High-Contrast 1½” Face\u003c\/li\u003e\n\u003cli\u003eMatte Black Stainless Steel Case and Bezel\u003c\/li\u003e\n\u003cli\u003eStandard 1\/8” Male NPT Fitting\u003c\/li\u003e\n\u003cli\u003eSilicone Filled for Accuracy and Vibration Absorption\u003c\/li\u003e\n\u003cli\u003eIndustry Standard Glass Lens\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Grams Performance","offers":[{"title":"Black","offer_id":29175608213603,"sku":"grpG2-99-0030","price":48.35,"currency_code":"NZD","in_stock":true},{"title":"White","offer_id":29175608246371,"sku":"grpG2-99-0030W","price":48.35,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/g2-99-0030w_gp_02.png?v=1580789284"},{"product_id":"radium-engineering-surge-tank-w-integrated-fpr","title":"Radium Engineering Surge Tank w' Integrated FPR","description":"\n\u003cp\u003eA fuel surge tank (FST) is designed to prevent fuel starvation to the engine on vehicles with inadequate fuel tank baffling. The FST fuel pump feeds the fuel rail(s). The volume of fuel inside the surge tank acts as a buffer to always keep the FST pump supplied with fuel. This volume is maintained by the main fuel tank's (lift) pump as well as the fuel returning from the fuel pressure regulator.\u003c\/p\u003e\n\u003cp\u003eIn the case of the FST-R, the regulator is built into the surge tank and is recirculating fuel internally. Excess fuel in the surge tank is returned back to the vehicle's main fuel tank.\u003c\/p\u003e\n\u003cp\u003eInstalling a surge tank is also an easy way to upgrade the fuel pump of a vehicle without opening or modifying the OEM fuel tank.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRADIUM FST-R FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull CNC aluminium construction with O-ring sealed interfaces\u003c\/li\u003e\n\u003cli\u003eAnodized for compatibility with all fuel types\u003c\/li\u003e\n\u003cli\u003eIntegrated adjustable fuel pressure regulator with 1:1 vacuum reference\u003c\/li\u003e\n\u003cli\u003eInterchangeable regulator orifice sizes to match output of different pumps\u003c\/li\u003e\n\u003cli\u003eNickel-Plated Electrical Connector with 24\" Flying Leads\u003c\/li\u003e\n\u003cli\u003eAssembled with stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eThree 6AN male fittings (8AN can be purchased separately)\u003c\/li\u003e\n\u003cli\u003eFully assembled and leak tested before shipment\u003c\/li\u003e\n\u003cli\u003eLifetime warranty on Radium components (excludes fuel pump, hoses and fittings)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRADIUM FST-R\u003c\/h3\u003e\n\u003cp\u003eThe FST-R (Fuel Surge Tank–Regulated) is an all-new design that houses a single internal fuel pump and has an integrated fuel pressure regulator machined into the top cap. The high-flow regulator is adjustable and features interchangeable orifice sizes. This revolutionary idea eliminates the need for an external fuel pressure regulator along with the extra fittings and hoses. This simplifies the installation, reduces overall cost, reduces weight, and eliminates potential leak points in the fuel system. Furthermore, this system permits cooler fuel temperatures as the fuel is not returning from the hot engine bay. Like all Radium fuel surge tanks, this universal product can be used on any fuel injected application and is compatible with all fuel types.  \u003ca href=\"http:\/\/radiumauto.com\/media\/blog-page.php?New-Product-Release-FST-R....Two-parts-in-one-83\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdditional details on the design of the FST-R can be found here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe FST-R can be configured with all 39mm fuel pumps from many leading manufacturers. If the pump is purchased as part of the FST-R, the surge tank will come fully assembled and will be pressure tested for leaks and ready to be installed. If the pump is purchased elsewhere, some assembly will be required.\u003c\/p\u003e\n\u003cp\u003eThe\u003cstrong\u003e Ti Automotive E5LM brushless pump requires a fuel controller\u003c\/strong\u003e to operate. Some OEM vehicles such as BMW, Buggatti, etc. use brushless pumps and their OEM controllers may work for the E5LM pump. Also, there are aftermarket companies that make brushless packages such as \u003ca href=\"http:\/\/alphaperformance.com\/\"\u003eAMS Performance\u003c\/a\u003e, \u003ca href=\"http:\/\/www.sillyrabbitmotorsport.com\/\"\u003eSRM\u003c\/a\u003e, etc. Check availability first before ordering.\u003c\/p\u003e\n\u003cp\u003eThe side port is the regulated pressure output and is plumbed directly to the fuel rail(s). No additional fuel pressure regulator is required. Pressure adjustment is done using the adjustment screw located on the top cap of the regulator unit. A vacuum line hooks up to the nipple on the FST-R to achieve 1:1 vacuum reference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e \u003cbr\u003eReturnless fuel systems commonly use a constant fuel pressure. In this case, the vacuum reference hose is not required. Fuel Pressure Gauge NOT Included.\u003c\/p\u003e\n\u003cp\u003eThe FST-R is not available in dual-pump configurations.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"No \/ AEM 50-1000","offer_id":29175629054051,"sku":"rad20-0129-00","price":1213.31,"currency_code":"NZD","in_stock":true},{"title":"No \/ AEM 50-1200 E85","offer_id":29175629086819,"sku":"rad20-0130-00","price":1213.31,"currency_code":"NZD","in_stock":true},{"title":"Yes \/ AEM 50-1200 E85","offer_id":29175628955747,"sku":"rad20-0130-01","price":1348.85,"currency_code":"NZD","in_stock":true},{"title":"No \/ Walbro GSS342","offer_id":29175628988515,"sku":"rad20-0133-00","price":1184.02,"currency_code":"NZD","in_stock":true},{"title":"Yes \/ Walbro GSS342","offer_id":29175628890211,"sku":"rad20-0133-01","price":1282.24,"currency_code":"NZD","in_stock":true},{"title":"No \/ Walbro F90000267\/274\/285 E85","offer_id":29175629021283,"sku":"rad20-0135-00","price":1184.02,"currency_code":"NZD","in_stock":true},{"title":"Yes \/ Walbro F90000274 E85","offer_id":29175628922979,"sku":"rad20-0135-01","price":1431.0,"currency_code":"NZD","in_stock":true},{"title":"No \/ Ti Automotive E5LM","offer_id":29175629119587,"sku":"rad20-0368-00","price":1184.02,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/prod_pic-4241.jpg?v=1580878306"},{"product_id":"vibrant-reducer-adaptor-fitting","title":"Vibrant Reducer Adaptor Fitting","description":"\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eVibrant Performance is one of the USA’s premier supplier of quality exhaust, fabrication and plumbing components.\u003c\/p\u003e\n\u003cp\u003eTheir fittings do not leak and will not fail.\u003c\/p\u003e\n\u003cp\u003eE85 Compatible\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Vibrant Performance","offers":[{"title":"44779","offer_id":39861956051043,"sku":"vib10432","price":23.01,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/10432_WEBL.jpg?v=1580879175"},{"product_id":"vibrant-180-degree-hose-end-fitting","title":"Vibrant 180 Degree Hose End Fitting","description":"\n\n\u003cp\u003eVibrant Performance are one of the USA's premier supplier of quality exhaust, fabrication and plumbing components.\u003c\/p\u003e\n\u003cp\u003eE85 Compatibile\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Vibrant Performance","offers":[{"title":"-6","offer_id":29175693705315,"sku":"vib21806","price":73.68,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/21806_WEBL.jpg?v=1580879180"},{"product_id":"vibrant-90-deg-elbow-hose-end-fitting","title":"Vibrant 90 Deg Elbow Hose End Fitting","description":"\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eVibrant Performance is one of the USA’s premier supplier of quality exhaust, fabrication and plumbing components.\u003c\/p\u003e\n\u003cp\u003eTheir fittings do not leak and will not fail.\u003c\/p\u003e\n\u003cp\u003eE85 Compatible\u003c\/p\u003e","brand":"Vibrant Performance","offers":[{"title":"-4","offer_id":29175693738083,"sku":"vib21904","price":52.95,"currency_code":"NZD","in_stock":true},{"title":"-6","offer_id":29175693836387,"sku":"vib21906","price":55.25,"currency_code":"NZD","in_stock":true},{"title":"-8","offer_id":29175693869155,"sku":"vib21908","price":61.25,"currency_code":"NZD","in_stock":true},{"title":"-10","offer_id":29175693901923,"sku":"vib21910","price":70.46,"currency_code":"NZD","in_stock":true},{"title":"-12","offer_id":29175693803619,"sku":"vib21912","price":81.28,"currency_code":"NZD","in_stock":true},{"title":"-16","offer_id":29175693770851,"sku":"vib21916","price":93.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/21906_WEBL.jpg?v=1580879182"},{"product_id":"epman-billet-fuel-filter","title":"EPMAN Billet Fuel Filter","description":"\u003cp\u003eEPMAN T6062 Billet Aluminium Fuel Filter 100 Micro stainless filer element (removable\/cleanable) -6 AN fittings included\u003c\/p\u003e\n\u003cp\u003eNote: We recommend a thorough inspection before installation to ensure the filter is clean and free from all loose debris.  Filters come loosely assembled.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePlease note this is an entry level budget product which is reflected in its pricing. Small burrs and scratches or lack in overall quality are not considered grounds for refund. Please opt for a higher quality brand if this is going to be an issue for your build.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"EPMAN","offers":[{"title":"Black \/ AN6","offer_id":29175699603555,"sku":"EP-OF06-BK","price":64.8,"currency_code":"NZD","in_stock":true},{"title":"Blue \/ AN6","offer_id":29175699636323,"sku":"EP-OF06-BL","price":64.8,"currency_code":"NZD","in_stock":true},{"title":"Black \/ AN8","offer_id":40491181998179,"sku":"EP-OF08-BK","price":64.8,"currency_code":"NZD","in_stock":true},{"title":"Blue \/ AN8","offer_id":40491182030947,"sku":"EP-OF08-BL","price":64.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/475327006f4673ab794d48191baf9c0f.image_.654x550.jpg?v=1580879249"},{"product_id":"epman-billet-fuel-rail-d-series","title":"EPMAN Billet Fuel Rail - D Series","description":"\u003cp\u003e\u003cstrong\u003eEPMAN Billet Fuel Rail – D series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eDress up your bay and increase your fuel flow capacity with these cost effective billet fuel rails from EPMAN.\u003c\/p\u003e\n\u003cp\u003eEasy to fit and connect up to OEM fuel lines or adapt to AN fittings.\u003c\/p\u003e\n\u003cp\u003eIncludes port for fuel pressure gauge.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePlease note this is an entry level budget product which is reflected in its pricing. Small burrs and scratches or lack in overall quality are not considered grounds for refund. Please opt for a higher quality brand if this is going to be an issue for your build.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"EPMAN","offers":[{"title":"Default Title","offer_id":29175699800163,"sku":"EP-HONDAD16YG","price":104.48,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/AUTOFAB-HIGH-FLOW-FUEL-RAIL-Fit-For-font-b-Honda-b-font-99-00-font-b.jpg?v=1580789935"},{"product_id":"epman-billet-fuel-rail-b-series","title":"EPMAN Billet Fuel Rail - B Series","description":"\u003cp\u003e\u003cstrong\u003eEPMAN Billet Fuel Rail – B series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eDress up your bay and increase your fuel flow capacity with these cost effective billet fuel rails from EPMAN.\u003c\/p\u003e\n\u003cp\u003eEasy to fit and connect up to OEM fuel lines or adapt to AN fittings.\u003c\/p\u003e\n\u003cp\u003eIncludes port for fuel pressure gauge.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePlease note this is an entry level budget product which is reflected in its pricing. Small burrs and scratches or lack in overall quality are not considered grounds for refund. Please opt for a higher quality brand if this is going to be an issue for your build.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"EPMAN","offers":[{"title":"Default Title","offer_id":29175699865699,"sku":"EP-HONDAB16YG","price":117.7,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/EPMAN-FUEL-INJECTOR-RAIL-BLUE-Fit-For-Honda-Civic-Si-B16A-B16A1-B16A2-B16A3-EP-HONDAB16YG-1.jpg?v=1580789936"},{"product_id":"vibrant-straight-hose-end-fitting","title":"Vibrant Straight Hose End Fitting","description":"\n\n\u003cp\u003eVibrant Performance are one of the USA's premier supplier of quality exhaust, fabrication and plumbing components.\u003c\/p\u003e\n\u003cp\u003eE85 Compatibile\u003c\/p\u003e","brand":"Vibrant Performance","offers":[{"title":"-4","offer_id":42846606393443,"sku":"vib21004","price":25.32,"currency_code":"NZD","in_stock":true},{"title":"-6","offer_id":42846606458979,"sku":"vib21006","price":26.69,"currency_code":"NZD","in_stock":true},{"title":"-8","offer_id":42846607278179,"sku":"vib21008","price":30.62,"currency_code":"NZD","in_stock":true},{"title":"-10","offer_id":42846607409251,"sku":"vib21010","price":37.52,"currency_code":"NZD","in_stock":true},{"title":"-12","offer_id":31848261189731,"sku":"vib21012","price":52.95,"currency_code":"NZD","in_stock":true},{"title":"-16","offer_id":42846607474787,"sku":"vib21016","price":75.07,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/21006_WEBL.jpg?v=1580879281"},{"product_id":"vibrant-alloy-male-weld-bung","title":"Vibrant Alloy Male Weld Bung","description":"\n\n\u003cp\u003eVibrant Weld Bungs are ideal for use with Aluminium Radiators, Oil Pans, custom tank fabrication or any other project that requires custom plumbing.\u003c\/p\u003e\n\u003cp\u003eAll Bungs Sold Seperately.\u003c\/p\u003e","brand":"Vibrant Performance","offers":[{"title":"-6","offer_id":29175708876899,"sku":"vib11151","price":20.7,"currency_code":"NZD","in_stock":true},{"title":"-8","offer_id":29175708909667,"sku":"vib11152","price":23.01,"currency_code":"NZD","in_stock":true},{"title":"-10","offer_id":29175708942435,"sku":"vib11153","price":25.32,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/11153_WEBL.jpg?v=1580879303"},{"product_id":"epman-fuel-pressure-gauge","title":"EPMAN Fuel Pressure Gauge","description":"\n\u003cp\u003eFuel pressure gauge liquid 0-160 psi oil press gauge fuel gauge white face universal 1\/8 NPT 0-160 psi universal High Quality Fuel Pressure Gauge\u003c\/p\u003e\n\u003cp\u003eCompact sized  fuel pressure Gauge. Proper fuel pressure is critical for adjusting your carburettor or fuel injection, so don't rely on a poor quality gauge, Get this direct mount fuel pressure gauge. Liquid FILLED keeps the needle steady, which is extremely critical during engine operation\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003eFit with 1\/8 NPT Threads\u003c\/p\u003e\n\u003c\/div\u003e","brand":"EPMAN","offers":[{"title":"Default Title","offer_id":29175726702691,"sku":"GA04D1","price":26.45,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Untitled-1_fd3a9bc5-65bf-4d13-8f81-7fc7c48034f1.png?v=1600055558"},{"product_id":"epman-universal-alloy-surge-tank-2l","title":"EPMAN Universal Alloy Surge Tank - 2L","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003eEPMAN Aluminium Alloy 2L 2 Litre Universal Fuel Surge Cell Tank.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimension:\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolume - 2 Litres\u003c\/li\u003e\n\u003cli\u003eIn\/Outlet -8AN Fitting (Top)\u003c\/li\u003e\n\u003cli\u003eIn\/Outlet -6AN Fitting x 2 (bottom)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade From High-Quality Light Weight Aluminium\u003c\/li\u003e\n\u003cli\u003eThis is a universal tank, some modification may be required to fit your car\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePlease note this is an entry level budget product which is reflected in its pricing. Small burrs and scratches or lack in overall quality are not considered grounds for refund. Please opt for a higher quality brand if this is going to be an issue for your build.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"EPMAN","offers":[{"title":"Default Title","offer_id":29175735189603,"sku":"EP-YX9411-2","price":117.7,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Untitled-presentation-copy.jpg?v=1580879540"}],"url":"https:\/\/www.speedscience.co.nz\/collections\/fuel-system.oembed?page=9","provider":"Speed Science","version":"1.0","type":"link"}