{"title":"Exhaust","description":"","products":[{"product_id":"yonaka-2-25-stainless-catback-exhaust-system-ef-civic-3dr","title":"Yonaka 2.25\" Stainless Catback Exhaust System - EF Civic 3dr","description":"\n\u003cp\u003eThis Yonaka Motorsports catback exhaust system is made of fully polished stainless steel, with 2.25\" OD mandrel bent piping, and a 4.25\" tip. Expect a quiet, clean, deep hum, without that irritating mid-range raspy sound.\u003c\/p\u003e\n\u003cp\u003eDirect bolt-on fit. All installation hardware is included.\u003c\/p\u003e\n\u003cp\u003eNote: Some USDM vs JDM\/NZDM differences may require basic modification.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"951\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/W0sfomOf71I\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Yonaka - USA","offers":[{"title":"Default Title","offer_id":29062334120035,"sku":"YMCB003","price":1404.15,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/YMCB003-2.jpg?v=1580793640"},{"product_id":"cobb-3-stainless-catback-exhaust-ms3-gen-1","title":"COBB 3\" Stainless Catback Exhaust - Mazda MPS \/ MS3 Gen 1","description":"\u003cp\u003eThe COBB Tuning Gen1 MAZDASPEED3 Cat-Back is constructed purely from 304 Stainless Steel. The system starts with a stock donut-style flange that mounts to the OEM downpipe or any stock-replacement downpipe, such as the COBB Tuning 3\" Downpipe.\u003c\/p\u003e\n\u003cp\u003eNext up is a polished resonator section with attractive rolled end-cap, followed by a polished low-restriction straight-through muffler section, also with this attractive rolled end-caps. A thick stainless-steel 2-bolt flange connects to the final section of the exhaust that ends in a tasteful, slash-cut 3.5\" double wall tip featuring an etched COBB logo.\u003c\/p\u003e\n\u003cp\u003eThis COBB Tuning exhaust system conforms to the SAE dictated 95-decibel exhaust noise level limit enforced by California, as well as other states in the US.\u003c\/p\u003e\n\u003cp\u003eThe COBB 3\" SS Catback Exhaust was engineered specifically to match the performance needs of the 2007-2009 MAZDASPEED3. The attention to detail that goes into the fabrication of this catback makes it a shame to hide it underneath the car. Manufactured using mandrel-bent T304 stainless steel with a custom resonator and high-flow muffler for optimal performance and reliability. Its factory-like fit, attractive finish and subtle yet deep exhaust note put it safely 11 dB below the SAE J1169 limit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"no-b-margin\"\u003e\n\u003cli\u003e304 Stainless Steel for Corrosion Resistance\u003c\/li\u003e\n\u003cli\u003eTIG Welded Throughout\u003c\/li\u003e\n\u003cli\u003ePolished 4\" Tip\u003c\/li\u003e\n\u003cli\u003eImpressive Sound\u003c\/li\u003e\n\u003cli\u003eWithin SAE J1169 Sound Restrictions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ciframe title=\"vimeo-player\" src=\"https:\/\/player.vimeo.com\/video\/124645248\" width=\"640\" height=\"360\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e","brand":"COBB","offers":[{"title":"Default Title","offer_id":29062334283875,"sku":"COBB571100","price":1575.36,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/571100_main.jpg?v=1580787037"},{"product_id":"plm-power-driven-tri-y-header-b-series","title":"PLM Power Driven Tri-Y Header - B Series - BIG TUBE","description":"\u003cp\u003eThe best B series header design on the market, period. The Tri-Y design delivers extra power throughout the entire rev range. A hybrid of conventional 4-2-1 and 4-1 designs, it is the go-to header for all serious about making more power!\u003c\/p\u003eDesigned for high compression big cam 1800\/2000cc builds\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade of 304 Stainless steel\u003c\/li\u003e\n\u003cli\u003eOne year limited warranty\u003c\/li\u003e\n\u003cli\u003eShort tube Tri-Y header\u003c\/li\u003e\n\u003cli\u003eTrue 2.5\" collector\u003c\/li\u003e\n\u003cli\u003eMachined CNC'd manifold flange\u003c\/li\u003e\n\u003cli\u003eGaskets included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e Ground clearance is significantly reduced over other designs. If your car is very low, we suggest looking at the host of other options we have in stock - all of which have superior ground clearance.\u003c\/p\u003eThe angle of the section under the sump points downwards somewhat - usually som modification is required, esp on low cars.\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e As per usual, EF \u0026amp; DA owners will require aftermarket subframe\/traction bar setups.\u003c\/p\u003e","brand":"PLM","offers":[{"title":"Default Title","offer_id":29175300685923,"sku":"PLM-HB20-HEADER","price":1053.11,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/PLM-HB18-HEADER-2T.jpg?v=1582164667"},{"product_id":"plm-power-driven-tri-y-header-h22a-f20b","title":"PLM Power Driven Tri-Y Header - H22A\/F20B","description":"\u003cp\u003ePrivate Label MFG H-Series Tri-Y header features a true step up exhaust header design. The four-piece design header delivers low to mid range power while maximizing engine compartment space for this exhaust manifold. The header is ideal for all forms of competition; auto-cross, drag racing and road racing.\u003c\/p\u003e\n\u003cp\u003eRecommended for Preludes\/Accords and swap cars with H-Series motors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade of 304 Stainless steel\u003c\/li\u003e\n\u003cli\u003eOne year limited warranty\u003c\/li\u003e\n\u003cli\u003eShort tube Tri-Y header\u003c\/li\u003e\n\u003cli\u003eTrue 2.5\" collector\u003c\/li\u003e\n\u003cli\u003eMachined CNC-ed manifold flange\u003c\/li\u003e\n\u003cli\u003eFlange is .38\" which is just about 3\/8\" thick\u003c\/li\u003e\n\u003cli\u003e18G on the 304 S\/S. Measured at .049\" to .050\"\u003c\/li\u003e\n\u003cli\u003eFour piece design\u003c\/li\u003e\n\u003cli\u003eGaskets included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: This header does not come with a flex fitting.\u003c\/strong\u003e\u003c\/p\u003e","brand":"PLM","offers":[{"title":"Default Title","offer_id":29175301439587,"sku":"PLM-H2B-HEADER","price":1010.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/PLM-H2B-HEADER-2T.jpg?v=1588306299"},{"product_id":"plm-k-series-header-4-2-1-cl7-9","title":"PLM Power Driven Header 4-2-1 - CL7\/9","description":"\u003cp\u003ePrivate Label MFG Power Driven K-Series CL7\/9 4-2-1 header features a true step-up exhaust header which is designed and engineered for maximum flow and horsepower. The Tri-Y header delivers low to mid-end power while utilizing a two-piece design.\u003c\/p\u003e\n\u003cp\u003eThis is ideal for all forms of competition; Autocross, drag racing and Road racing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade of 304 Brushed Stainless steel\u003c\/li\u003e\n\u003cli\u003e2.5-inch collector outlet\u003c\/li\u003e\n\u003cli\u003eHand TIG Welded\u003c\/li\u003e\n\u003cli\u003eCNC machined manifold flange\u003c\/li\u003e\n\u003cli\u003eOne year warranty\u003c\/li\u003e\n\u003cli\u003e1 DECAT pipe\u003c\/li\u003e\n\u003cli\u003e18G on the 304 S\/S. Measured at .049\" to .050\"\u003c\/li\u003e\n\u003cli\u003eOEM spec header gasket\u003c\/li\u003e\n\u003cli\u003eOEM spec donut gasket\u003c\/li\u003e\n\u003cli\u003eTwo piece design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor the CL9\/K24 it may need some fabrication to get clearance on the cross member for the header to fit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA usdm vs jdm difference means secondary o2 sensor positioning requires modification\u003c\/strong\u003e\u003c\/p\u003e","brand":"PLM","offers":[{"title":"Default Title","offer_id":29175301537891,"sku":"PLM-HK24-CL9-HEADER","price":1215.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/PLM-HK24-HEADER-2T.jpg?v=1580873769"},{"product_id":"plm-k-series-header-4-2-1-dc5-ep3","title":"PLM Power Driven Header 4-2-1 - DC5\/EP3","description":"\u003cp\u003ePrivate Label MFG K-series DC5\/EP3 Tri-Y header features a true step-up exhaust header design. The Tri-Y header delivers low to mid end power while utilizing a four piece design which maximizes the engine compartment space. This exhaust manifold is ideal for all forms of competition; Autocross, drag racing and road racing.\u003c\/p\u003e\n\u003cp\u003e*Includes Test pipe, Gaskets \u0026amp; all necessary hardware\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade of 304 Stainless steel\u003c\/li\u003e\n\u003cli\u003eOne year limited warranty\u003c\/li\u003e\n\u003cli\u003eShort tube Tri-Y header\u003c\/li\u003e\n\u003cli\u003eTrue 2.5\" collector\u003c\/li\u003e\n\u003cli\u003eMachined CNC-ed manifold flange\u003c\/li\u003e\n\u003cli\u003eFlange is .38\" which is just about 3\/8\" thick\u003c\/li\u003e\n\u003cli\u003e18G on the 304 S\/S. Measured at .049\" to .050\"\u003c\/li\u003e\n\u003cli\u003eFive piece design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e EP3 owners will need to modify test pipe\/exhaust for correct fitment due to differences with DC5 (which the headers are designed for). Due to sway bar clearance issues, we have found on some models fitting longer sway bar links allows more sway bar clearance.\u003c\/p\u003e","brand":"PLM","offers":[{"title":"Default Title","offer_id":29175301865571,"sku":"PLM-HDC5-HEADER","price":948.3,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/PLM-HDC5-HEADER-3T.jpg?v=1580873799"},{"product_id":"plm-power-driven-ta-header-b-series","title":"PLM Power Driven TA Header - B Series","description":"\n\u003cp\u003ePrivate Label MFG Power Driven (TA) B-Series header features a true 4-2-1 merge collector for more equal exhaust flow. This header delivers the best peak horsepower gain while utilizing a one piece design. This is ideal for all forms of competition; Autocross, Drag racing and road racing.\u003c\/p\u003e\n\u003cp\u003e*Private label MFG recommends using our test pipes for an easier installation.\u003c\/p\u003e\n\u003cp\u003eRecommended for 1.6L-2.0L engine displacements\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade of Stainless steel\u003c\/li\u003e\n\u003cli\u003eOne year limited warranty\u003c\/li\u003e\n\u003cli\u003eShort tube Tri-Y header\u003c\/li\u003e\n\u003cli\u003eTrue 2.5\" collector\u003c\/li\u003e\n\u003cli\u003eMachined CNC-ed manifold flange\u003c\/li\u003e\n\u003cli\u003eFlange is .38\" which is just about 3\/8\" thick\u003c\/li\u003e\n\u003cli\u003e18G on the 304 S\/S. Measured at .049\" to .050\"\u003c\/li\u003e\n\u003cli\u003eOne piece design\u003c\/li\u003e\n\u003cli\u003eGaskets included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Will fit EF\/DA chassis with minimal subframe modification - less so than Tri-y and other designs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned for maximum ground clearance whilst still providing a fantastic increase in torque and performance. The go-to option for those whose car is lowered by 50mm or more.\u003c\/strong\u003e\u003c\/p\u003e","brand":"PLM","offers":[{"title":"Default Title","offer_id":29175309434979,"sku":"PLM-HB18-TA-HEADER","price":1044.1,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Untitled-4.png?v=1588306940"},{"product_id":"vibrant-streetpower-muffler-flat-black","title":"Vibrant StreetPower Muffler - Flat Black","description":"\n\u003cp\u003eFly below the radar with a Vibrant STREETPOWER Flat Black Muffler. It's a must for any true \"Sleeper\" car.\u003c\/p\u003e\n\u003cp\u003e100% Stainless Steel Construction with a high temperature Flat Black coating to help avoid unwanted attention\u003c\/p\u003e\n\u003cp\u003eFeature Vibrant's \"True Straight Through\" perforated internals for unrestricted flow and maximum horsepower.\u003c\/p\u003e\n\u003cp\u003eThese mufflers are densely packed with our premium multi-layered sound absorption materials, helping produce a low, deep exhaust tone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMuffler Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInlet Diameter: 3\"\u003c\/li\u003e\n\u003cli\u003eTip(s) Style: 3\" Round Tip, Angle Cut (Single Wall)\u003c\/li\u003e\n\u003cli\u003eMuffler Size: 5\" x 9\" Oval Muffler Body, 15\" Long\u003c\/li\u003e\n\u003cli\u003eOverall Length: 20\" (including tip)\u003c\/li\u003e\n\u003cli\u003eTip Length: 5\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vibrant Performance","offers":[{"title":"2.25\"","offer_id":29175323951203,"sku":"VIB1145","price":428.39,"currency_code":"NZD","in_stock":true},{"title":"2.5\"","offer_id":29175323983971,"sku":"VIB1146","price":428.39,"currency_code":"NZD","in_stock":true},{"title":"3\"","offer_id":29175324016739,"sku":"VIB1147","price":444.51,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/1145_1.jpg?v=1582166222"},{"product_id":"vibrant-ultra-quiet-resonator","title":"Vibrant Ultra Quiet Resonator","description":"\n\u003cp\u003eVibrant's Ultra Quiet Resonator utilizes a larger sound absorption chamber for better sound suppression than typical bottle style resonators.\u003c\/p\u003e\n\u003cp\u003eFeature Vibrant's \"True Straight Through\" perforated core, surrounded by our premium multi-layer sound absorption materials.\u003c\/p\u003e\n\u003cp\u003eOriginally designed to help eliminate the \"rifling\" noise that is common with most 6 cyl. and 8 cyl. vehicles equipped with straight through performance exhaust systems, but now being used world wide to reduce overall sound.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBody Width: 6.5\" x 4.75\"\u003c\/li\u003e\n\u003cli\u003eBody Length: 9.75\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 13.75\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vibrant Performance","offers":[{"title":"2.25 Inch","offer_id":29175324115043,"sku":"VIB1140","price":361.6,"currency_code":"NZD","in_stock":true},{"title":"2.5 Inch","offer_id":29175324180579,"sku":"VIB1141","price":361.6,"currency_code":"NZD","in_stock":true},{"title":"3 Inch","offer_id":29175324213347,"sku":"VIB1142","price":368.51,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/1140_WEBL.jpg?v=1582171273"},{"product_id":"blox-racing-test-pipes","title":"BLOX Racing Adjustable Test Pipes - EF\/EG\/DA\/DC\/DB\/EK","description":"\u003cp class=\"p1\"\u003eBLOX Racing test pipes are constructed out of T304 stainless steel and are great alternatives for the restrictive factory catalytic converter.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eEach test pipe is TIG-welded and features thick flanges and significantly increases exhaust flow.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe Honda test pipes feature slip-fit piping that offer adjustability and versatility in clocking angles. This unique feature helps accommodate the many different header lengths and collector angles that are currently on the market.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eOverall Length w\/ Mid Section Installed - 16.75\"\u003cbr\u003eOverall Length w\/o Mid Section Installed - 11.75\" \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eSupplied with adonut gasket, MLS gasket and hardware.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eFOR RACE USE ONLY.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 class=\"p1\"\u003eVEHICLE APPLICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e88-91 Civic\/CRX\u003c\/li\u003e\n\u003cli\u003e92-95 Civic\u003c\/li\u003e\n\u003cli\u003e92-97 Delsol\u003c\/li\u003e\n\u003cli\u003e96-00 Civic\u003c\/li\u003e\n\u003cli\u003e90-93 Integra\u003c\/li\u003e\n\u003cli\u003e94-01 Integra\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BLOX Racing","offers":[{"title":"2.25 Inch","offer_id":29175329390691,"sku":"BXEX-20100","price":296.14,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/BXEX-20100_1.jpg?v=1580787387"},{"product_id":"gfb-ex50-50mm-external-wastegate-v-band","title":"GFB EX50 - 50mm External Wastegate","description":"\u003cp\u003e\u003cstrong\u003e\"with the manifold glowing...the boost never varies\"\u003c\/strong\u003e Joe Signorelli\u003c\/p\u003e\n\u003cp\u003eDesigned to cope with the brutal conditions of extreme exhaust temperatures, the EX50 features not only a huge flow capacity, but also a compact size that is unmatched by competitors for a 50mm wastegate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupplied with a 13psi spring\u003c\/li\u003e\n\u003cli\u003e7psi and 9psi springs also available that can be ganged together with the supplied 13psi spring in various combinations to allow boost pressures of 7, 9, 13, 16, 20, 22 and 29psi.\u003c\/li\u003e\n\u003cli\u003eBody, valve and seat are made from high-temp stainless steel\u003c\/li\u003e\n\u003cli\u003eActuator housing machined from billet 7075 aluminium – much stronger \u0026amp; harder than 6061\u003c\/li\u003e\n\u003cli\u003eFlow tests show that for the same valve lift, the EX50 outflows its nearest competitor by 18%\u003c\/li\u003e\n\u003cli\u003eInternal valve shroud protects valve stem from excessive heat and prevents carbon-related sticking\u003c\/li\u003e\n\u003cli\u003eTop-hat style Nomex-reinforced silicone rolling diaphragm for longer valve travel\u003c\/li\u003e\n\u003cli\u003e90° banjo-style boost hose connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eV-band clamp mounting system, supplied with 304 stainless weld-on adaptors (base flange is compatible with TiAl 44 flange when used with GFB adaptor)\u003c\/p\u003e\n\u003cp\u003eOur main goal for the EX50 was to create a wastegate that had a very large flow capacity in a package that is physically as small as possible.  This was achieved with the use of CAD design which allowed us to minimise the amount of unnecessary bulk (particularly on the actuator).\u003c\/p\u003e\n\u003cp\u003eGood flow around a poppet-style valve depends on a smooth and generous bowl area into which the valve lifts.  Many brands do not allow enough room around the valve head for good flow, instead relying on increasing the valve travel as a band-aid solution.Joe Signorelli of Rotormaster and GAS Motorsport has done extensive testing on the EX50, on various high-powered circuit and drag engines (both piston and rotary), and most notably, on the brand-new 2JZ powered Celica.\u003c\/p\u003e\n\u003cp\u003eOf the EX50 Joe says “I couldn’t be happier with the way it performs.  Our circuit car comes into the pits after a race with the manifold glowing, and the boost never varies”.\u003c\/p\u003e","brand":"Go Fast Bits","offers":[{"title":"Standard 13psi","offer_id":29175330209891,"sku":"GFB-7001","price":729.0,"currency_code":"NZD","in_stock":true},{"title":"Add 7psi Spring","offer_id":29175330242659,"sku":"GFB-7001+7","price":788.0,"currency_code":"NZD","in_stock":true},{"title":"Add 7 \u0026 9 Psi Springs","offer_id":29175330308195,"sku":"GFB-7001+7+9","price":847.0,"currency_code":"NZD","in_stock":true},{"title":"Add 9 Psi Spring","offer_id":29175330275427,"sku":"GFB-7001+9","price":788.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Image-4.jpg?v=1580874179"},{"product_id":"skunk2-alpha-headers-d-series","title":"Skunk2 Alpha Headers - D Series","description":"\n\u003cp\u003eSkunk2 is proud to announce its all-new Alpha Series Header for the Honda D-Series engines. Patterned after our already popular and dyno-proven MegaPower Headers, which have been used by leading, competitive race teams for years, Skunk2's Alpha Series Header employs many of the same design characteristics and technology. Our decision to produce the Alpha Series Header was driven by our desire to make our race-proven design more affordable and accessible to everyday enthusiasts. New manufacturing techniques allow us to do so at a lower overall cost, making race-winning header technology available to everyone. Skunk2's Alpha Series Header for VTEC and non-VTEC D-series engines offers Skunk2 performance, industry-leading customer service, and a full warranty policy, all at a price \u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003ecomparable to lesser budget-minded headers. Unlike the budget-minded headers, though, only Skunk2 Alpha Series Headers ensure precise fitment and the peace of mind of knowing that a Skunk2 representative is just a phone call or email away.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAll Skunk2 Alpha headers are designed and engineered to maximize exhaust flow and increase both horsepower and torque throughout the powerband. The unique design is the result of more than a decade of racing experience coupled with computerized modeling and extensive dyno testing. \u003cstrong\u003eEach Skunk2 Alpha Series Header features equal-length, sequentially paired, stepped primaries in a 4-2-1 tri-Y design that terminates with True Merged Collector with a 2.5-inch outlet\u003c\/strong\u003e. Skunk2's Alpha Header also include 02 bungs for OEM and aftermarket sensors. Each header is constructed from stainless steel with mandrel-bent tubing for strength, corrosion resistance and durability. The Skunk2 Alpha D-Series header also includes a donut gasket and a weld on exhaust flange, this included flange can be utilized as an option to weld the Alpha Header to an aftermarket exhaust.\u003c\/p\u003e\n\u003cp\u003eThese features, paired with Skunk2's unique design specs, provide an extremely broad powerband that's applicable to a wide range of engine sizes and configurations. Alpha Series Headers also feature specific sized primary tubes to achieve optimum overall and peak power. By sizing the primary tubes' diameter, Skunk2 is able to maintain the highest possible exhaust gas speed throughout the header, which improves mid-range power and throttle response significantly. Skunk2's Alpha Series Header provides the perfect combination of top-end power without sacrificing mid-range performance or throttle response. The Alpha Header will pair up perfectly with the Kraftwerks D-Series Supercharger Kit., and has all the clearance needed for a great fit.\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175360225379,"sku":"skk412-05-1970","price":1015.77,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/files\/Untitled-1_0000_412-05-1970_1.jpg?v=1731272343"},{"product_id":"skunk2-mega-power-rr-exhaust-eg-3dr-76mm","title":"Skunk2 Mega Power RR Exhaust - EG 3dr 76mm","description":"\n\u003cp\u003eA properly designed exhaust system is critical to engine performance. Skunk2's 76mm MegaPower RR Exhaust system for the '92-'95 Civic hatchback (all trims) was developed with this in mind and is based off of more than 15 years' worth of racing experience. Dyno-proven for maximum horsepower, MegaPower RR systems are constructed of T-304 stainless steel, are robotically TIG welded, and feature CNC mandrel bends for a precise fit.\u003c\/p\u003e\n\u003cp\u003eDesigned for heavily modified naturally aspirated engines as well as for turbocharged applications that require more exhaust flow than Skunk2's 70mm MegaPower R Exhausts provide, MegaPower RR Exhausts allow engines to breathe more efficiently and produce more power thanks to larger diameter piping. MegaPower RR Exhaust systems were designed for maximum flow and power, featuring oversized tubing and mufflers, which result in a significantly louder tone when compared to other MegaPower systems.\u003c\/p\u003e\n\u003cp\u003eFeaturing Japanese-spec, Super N1 styling, MegaPower RR Exhaust systems generate more horsepower by optimizing engine airflow and volume through carefully selected, application-specific tubing lengths and diameters and increased wave scavenging effects for more horsepower. CNC mandrel bending allows for a constant tubing diameter throughout the bend, which results in precise fitment as well as improved exhaust gas flow. Each system is fitted with a resonator, includes stainless steel flanges, and is finished off with a straight-through, low-restriction racing muffler for uninterrupted flow. Each fully polished muffler is mated to a 110mm polished tip with its own acid-etched MegaPower badge and serialized nameplate. A Skunk2 removable silencer and all necessary hardware are also included.\u003c\/p\u003e\n\u003cp\u003eSkunk2's MegaPower Exhaust systems are based off of the same systems we custom build for our road racing and time attack vehicles. MegaPower Exhaust systems offer more performance, better build-quality, and the ultimate sound when compared to comparably priced systems.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003cbr\u003e\u003c\/strong\u003e\u003cspan\u003eThis exhaust comes with a generic 2 bolt flange (contrary to the picture) at the cat converter end and will not bolt-on to any off the shelf header\/cat\/test pipe.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"860\" height=\"573\" src=\"https:\/\/www.youtube.com\/embed\/0_ZIoY8_qhc\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Skunk2 Exhausts","offers":[{"title":"Default Title","offer_id":29175429202019,"sku":"skk413-05-6010","price":1712.53,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/413-05-6010.jpg?v=1569190315"},{"product_id":"skunk2-mega-power-rr-exhaust-fd-civic-76mm","title":"Skunk2 Mega Power RR Exhaust - FD Civic 76mm","description":"\n\u003cp\u003eA properly designed exhaust system is critical to engine performance. Skunk2’s 76mm MegaPower RR Exhaust system for the '06-'11 Civic sedan was developed with this in mind and is based on more than 15 years’ worth of racing experience.\u003c\/p\u003e\n\u003cp\u003eDyno-proven for maximum horsepower, MegaPower RR systems are constructed of T-304 stainless steel, are robotically TIG welded, and feature CNC mandrel bends for a precise fit. Designed for heavily modified naturally aspirated engines as well as for turbocharged applications that require more exhaust flow than Skunk2’s 70mm MegaPower R Exhausts provide, MegaPower RR Exhausts allow engines to breathe more efficiently and produce more power thanks to larger diameter piping. MegaPower RR Exhaust systems were designed for maximum flow and power, featuring oversized tubing and mufflers, which result in a significantly louder tone when compared to other MegaPower systems. Featuring Japanese-spec, Super N1 styling, MegaPower RR Exhaust systems generate more horsepower by optimizing engine airflow and volume through carefully selected, application-specific tubing lengths and diameters and increased wave scavenging effects for more horsepower.\u003c\/p\u003e\n\u003cp\u003eCNC mandrel bending allows for a constant tubing diameter throughout the bend, which results in precise fitment as well as improved exhaust gas flow. Each system is fitted with a resonator, includes stainless steel flanges, and is finished off with a straight-through, low-restriction racing muffler for uninterrupted flow. Each fully polished muffler is mated to a 110mm polished tip with its own acid-etched MegaPower badge and serialized nameplate. A Skunk2 removable silencer and all necessary hardware are also included. Skunk2’s MegaPower Exhaust systems are based on the same systems we custom build for our road racing and time attack vehicles. MegaPower Exhaust systems offer more performance, better build-quality, and the ultimate sound when compared to comparably priced systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e USDM \u0026amp; JDM systems are slightly different. If using a USDM header - everything is 100% bolt on - if using a JDM header, some modification to the b pipe is required.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"860\" height=\"573\" src=\"https:\/\/www.youtube.com\/embed\/0_ZIoY8_qhc\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Skunk2 Exhausts","offers":[{"title":"Default Title","offer_id":29175439720547,"sku":"skk413-05-6030","price":1712.53,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/413-05-6030.jpg?v=1569190317"},{"product_id":"plm-k-series-header-4-2-1-k24-block-dc5-ep3","title":"PLM Power Driven Header 4-2-1 K24 - Honda DC5\/EP3","description":"\u003cp\u003ePrivate Label MFG K-series DC5\/EP3 Tri-Y header features a true step-up exhaust header design. The Tri-Y header delivers low to mid end power while utilizing a four piece design which maximizes the engine compartment space. This exhaust manifold is ideal for all forms of competition; Autocross, drag racing and road racing.\u003c\/p\u003e\n\u003cp\u003e*Includes Test pipe, Gaskets \u0026amp; all necessary hardware\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade of 304 Stainless steel\u003c\/li\u003e\n\u003cli\u003eOne year limited warranty\u003c\/li\u003e\n\u003cli\u003eShort tube Tri-Y header\u003c\/li\u003e\n\u003cli\u003eTrue 2.5″ collector\u003c\/li\u003e\n\u003cli\u003eMachined CNC-ed manifold flange\u003c\/li\u003e\n\u003cli\u003eFlange is .38″ which is just about 3\/8″ thick\u003c\/li\u003e\n\u003cli\u003e18G on the 304 S\/S. Measured at .049″ to .050″\u003c\/li\u003e\n\u003cli\u003eFive piece design\u003c\/li\u003e\n\u003cli\u003eNote: For EP3 Civic, DC5 Type R the test pipe may need modification to suit the Catback exhaust you are running. Sway bar clearance on some models is tight, we have found fitting longer sway bar links gives more sway bar clearance.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLM","offers":[{"title":"Default Title","offer_id":29175466426467,"sku":"PLM-HDC5-K24-HEADER","price":1170.13,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/1_edbdb589-a338-4b4c-8c06-3f5988b6ac1b.png?v=1588546435"},{"product_id":"xs-power-stainless-v3-turbo-manifold-ms3-6","title":"XS Power Stainless V3 Turbo Manifold - MS3\/6","description":"\u003cp\u003eThe best value for money manifolds on the market for the MPS\/Mazdaspeed platforms.\u003c\/p\u003e\n\u003cp\u003eThe new V3 version is available in both OEM and externally wastegated configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits factory turbo and big factory replacement turbos (Now T3 and 3\" V band Option available!!)\u003c\/li\u003e\n\u003cli\u003e44mm w\/g outlet (where applicable)\u003c\/li\u003e\n\u003cli\u003eT304 Thick-Wall Stainless\u003c\/li\u003e\n\u003cli\u003eFully TIG welded\u003c\/li\u003e\n\u003cli\u003eBraced with THICK flanges and piping to support the weight of the turbo\u003c\/li\u003e\n\u003cli\u003e11mm thick flange\u003c\/li\u003e\n\u003cli\u003e3mm thick wall piping\u003c\/li\u003e\n\u003cli\u003e48mm OD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWastegated version includes a block off cap and v-band clamp for running internal type wastegate if required.\u003c\/strong\u003e\u003c\/p\u003e","brand":"XS Power","offers":[{"title":"K04 + No Wastegate Flange","offer_id":29175492739171,"sku":"XSP-MAZDISI-V3-KO4-INTW\/G","price":950.0,"currency_code":"NZD","in_stock":true},{"title":"T3 + Wastegate Flange","offer_id":29175492804707,"sku":"XSP-MAZDISI-V3-T3","price":990.0,"currency_code":"NZD","in_stock":true},{"title":"3\" V Band Flange","offer_id":39885194854499,"sku":"XSP-MAZDISI-V3-Vband","price":990.0,"currency_code":"NZD","in_stock":true},{"title":"K04 + Wastegate Flange","offer_id":29175492771939,"sku":"XSP-MAZDISI-V3-WG","price":990.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/6251DS-1.jpg?v=1656475412"},{"product_id":"epman-stainless-v-band-clamp-kit","title":"EPMAN Stainless V-Band Clamp Kit","description":"\n\u003cp\u003eThese stainless steel V-band universal clamp flange are designed for welding to your pipes and clamping exhaust components together, and together with the SS304 stainless steel V-band clamp.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePackage includes:\u003c\/b\u003e  1 x clamp, 2 x flanges, male+female\u003cbr\u003e \u003cb\u003eMaterial:\u003c\/b\u003e  High quality 304 stainless steel\u003cbr\u003e \u003cb\u003eApplication: \u003c\/b\u003eUniversal kits\u003c\/p\u003e","brand":"EPMAN","offers":[{"title":"2.5\"","offer_id":29175508467811,"sku":"TK-VKG25","price":38.95,"currency_code":"NZD","in_stock":true},{"title":"2.75\"","offer_id":29175508500579,"sku":"TK-VKG275","price":39.95,"currency_code":"NZD","in_stock":true},{"title":"3\"","offer_id":29175508533347,"sku":"TK-VKG30","price":44.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/HTB174PoRVXXXXbBaXXXq6xXFXXXd.jpg?v=1580788670"},{"product_id":"epman-low-mount-turbo-manifold-b-series-t3","title":"EPMAN Low Mount Turbo Manifold - B Series T3","description":"\u003cp\u003e\u003cstrong\u003eEPMAN Low Mount Turbo Manifold – B Series T3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eHigh-Quality low mount manifold for all Honda B series engines.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with T3 exhaust housing and 2 bolt wastegate (35\/38mm)\u003c\/p\u003e\n\u003cp\u003eLow mount design makes for quick and easy turbo install with shorter piping and less fabrication required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThick, Strong Iron Casting\u003c\/li\u003e\n\u003cli\u003eLow Mount Design\u003c\/li\u003e\n\u003cli\u003eT3 Turbo Flange\u003c\/li\u003e\n\u003cli\u003e2 Bolt 35\/38mm Wastegate Flange\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePlease note this is an entry level budget product which is reflected in its pricing. Small burrs and scratches or lack in overall quality are not considered grounds for refund. Please opt for a higher quality brand if this is going to be an issue for your build.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"EPMAN","offers":[{"title":"Default Title","offer_id":29175526588515,"sku":"TK-EM03","price":183.83,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Screen-Shot-2016-08-03-at-4.34.26-PM.png?v=1580876921"},{"product_id":"gfb-ex38-38mm-external-wastegate","title":"GFB EX38 - 38mm External Wastegate","description":"\n\u003cp\u003eThe EX38 features a 38mm valve and comes standard with a 10psi spring. Additional springs are also available - by using various combinations of 5psi, 7psi, and 10psi springs, you can achieve base boost pressures of 5, 7, 10, 12, 15, 17, and 22psi.\u003c\/p\u003e\n\u003cp\u003eStanding only 93mm tall, the EX38 is shorter than its nearest rival. The inlet flange I.D. features a tapered entry to assist a smooth transition from the exhaust pipe into the valve, and the seat I.D. is larger than other wastegates of the same size for extra flow.\u003c\/p\u003e\n\u003cp\u003eThe EX38 is directly compatible with TiAl MV-S flanges, meaning you can use the EX38 on turbo kits designed for TiAl wastegates\u003c\/p\u003e\n\u003cp\u003eWhen it comes to external wastegates, some things you want big, others you want small – like big flow, small size, right? GFB offers a range that are among the most compact external wastegates in their class, being shorter in height than their closest rivals without sacrificing flow.\u003c\/p\u003e\n\u003cp\u003eAll GFB wastegates feature an investment cast body made from 253MA chromium-nickel stainless steel, a CNC machined billet stainless valve, and all stainless steel weld-on fittings and hardware, whilst the diaphragm is nomex-reinforced silicone. All this adds up to a wastegate built to handle extreme conditions with the reliability you can trust!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMost compact wastegate range on the market!\u003c\/li\u003e\n\u003cli\u003eBody, valve, seat and all mounting hardware is CNC machined from high-temp stainless steel\u003c\/li\u003e\n\u003cli\u003eActuator housing CNC machined from billet 6061 aluminium\u003c\/li\u003e\n\u003cli\u003eNomex-reinforced silicone diaphragm\u003c\/li\u003e\n\u003cli\u003eInternal shroud protects valve stem from excessive heat and prevents carbon-related sticking\u003c\/li\u003e\n\u003cli\u003eV-band clamp mounting system\u003c\/li\u003e\n\u003cli\u003eMade in Australia under ISO 9001\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Go Fast Bits","offers":[{"title":"Standard 10psi","offer_id":29175563649123,"sku":"GFB-7003","price":529.0,"currency_code":"NZD","in_stock":true},{"title":"Add 5psi Spring","offer_id":29175563681891,"sku":"GFB-7003+5","price":583.0,"currency_code":"NZD","in_stock":true},{"title":"Add 5 \u0026 7psi Springs","offer_id":29175563747427,"sku":"GFB-7003+5+7","price":638.0,"currency_code":"NZD","in_stock":true},{"title":"Add 7psi Spring","offer_id":29175563714659,"sku":"GFB-7003+7","price":583.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Image_0811aa4b-6a07-4ecb-81c3-680c262521c6.jpg?v=1580877407"},{"product_id":"tegiwa-o2-bung-bolt","title":"Tegiwa O2 Bung Bolt","description":"\n\u003cp\u003eThis is ideal if you need to 'plug' an existing sensor hole. Universal fit and will fit 99.9% of lamda threads\u003c\/p\u003e","brand":"Tegiwa","offers":[{"title":"Default Title","offer_id":29175575216227,"sku":"T-4040014","price":19.25,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/tegiwa-o2-bung-bolt.jpg?v=1580789071"},{"product_id":"skunk2-alpha-k-swap-header-eg-ek-dc","title":"Skunk2 Alpha K-Swap Header - EG\/EK\/DC","description":"\n\u003cp\u003eSkunk2’s Alpha Series Header utilizes our race-proven designs in a more affordable and accessible to everyday enthusiasts. Skunk2 has been designing custom headers for its drag racing, road racing, and endurance cars for years, and is now offering this same technology to consumers. Patterned after our already popular and dyno-proven MegaPower Headers, which have been used by leading, competitive race teams for years, Skunk2’s Alpha Series Header employs many of the same design characteristics and technology.\u003c\/p\u003e\n\u003cp\u003eK-Swap Alpha Headers are compatible with K-series engines in chassis ranging from the ’88-’91 Civic, ’92-’95 Civic, ’96-’00 Civic, ’90-’93 Integra, and ’94-’01 Integra. Fitment is second-to-none. Unlike competitors’ headers, Skunk2’s K-Swap Alpha Header does not require the front cross-member to be cut or modified, and is compatible with most swaps featuring Hasport engine mounts or comparable mount kits.\u003c\/p\u003e\n\u003cp\u003eSkunk2’s Alpha Header is designed and engineered to maximize exhaust flow and increase both horsepower and torque throughout the powerband. The unique design is the result of more than a decade of racing experience coupled with computerized modeling and extensive dyno testing. Each Skunk2 Alpha Header features equal-length, sequentially paired, stepped primaries and a 4-2-1 tri-Y design that terminates into a 2.5-inch collector. These features, paired with Skunk2’s unique design specs, provide an extremely broad powerband that’s applicable to a wide range of engine sizes and configurations. Alpha Headers also feature the smallest possible primary tubes required to achieve optimum overall and peak power. By minimizing the primary tubes’ diameter, Skunk2 is able to maintain the highest possible exhaust gas speed throughout the header, which improves mid-range power and throttle response significantly. Skunk2’s Alpha Header provides the perfect combination of top-end power without sacrificing mid-range power or throttle response.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEqual-Length, Tri-Y Design\u003c\/li\u003e\n\u003cli\u003eT-304 Stainless Steel Construction\u003c\/li\u003e\n\u003cli\u003eUnique Cylinder Pairing\u003c\/li\u003e\n\u003cli\u003eSpecially Designed Steps\u003c\/li\u003e\n\u003cli\u003eThin-Wall, Cast Collector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Header requires modification for use with K24 block\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175582294115,"sku":"skk412-05-1905","price":1217.67,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/800_alpha_swap_1.jpg?v=1569190330"},{"product_id":"yonaka-stainless-4-1-race-headers-b-series","title":"Yonaka Stainless 4-1 Race Headers - B Series","description":"\n\u003cp\u003eYonaka Motorsports headers for all B-Series DOHC VTEC motors featuring 1 5\/8\" pipes with 2.5\" collector flange. This is an aftermarket header, designed from the JDM 1998+ Integra Type R B18C engine.\u003c\/p\u003e\n\u003cp\u003eWith the larger pipes and the larger 2.5\" collector, it will immediately add horsepower. Totally redesigned to improve fitness and flow. This header is fully polished stainless steel.\u003c\/p\u003e\n\u003cp\u003eNote: We don't recommend these headers on extremely low cars.\u003c\/p\u003e","brand":"Yonaka - USA","offers":[{"title":"Default Title","offer_id":29175583572067,"sku":"YMEH004","price":585.88,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/YMEH004-2.jpg?v=1580877540"},{"product_id":"plm-t3-top-mount-turbo-manifold-h-f-series","title":"PLM T3 Top Mount Turbo Manifold - H\/F Series","description":"\n\u003cp\u003ePLM Private Label Mfg. Power Driven T3 Top Mount Turbo Manifold ( H\/F Series - H22A\/F20B) is designed to spool large turbos very quickly, producing massive midrange gains that carry to redline. This manifold is designed for any H\/F series boosted application, where long-lasting quality is important! Top mount design looks rad too!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand New In Box\u003c\/li\u003e\n\u003cli\u003eAlternator Relocation Bracket Required\u003c\/li\u003e\n\u003cli\u003eMade of 304 Stainless steel\u003c\/li\u003e\n\u003cli\u003eOne year limited warranty\u003c\/li\u003e\n\u003cli\u003eMachined CNC'd manifold flange\u003c\/li\u003e\n\u003cli\u003e12.5mm thick flanges\u003c\/li\u003e\n\u003cli\u003eThick 8 gauge \/ Schedule 40 pipe\u003c\/li\u003e\n\u003cli\u003eOne piece design\u003c\/li\u003e\n\u003cli\u003e44mm wastegate flanges\u003c\/li\u003e\n\u003cli\u003eNOT A\/C or P\/S compatible\u003c\/li\u003e\n\u003cli\u003eSurfaced Head Flange For Perfect Seal\u003c\/li\u003e\n\u003cli\u003eFully Ported Low Angle Merge Collector\u003c\/li\u003e\n\u003cli\u003eProfessionally TIG welded and assembled\u003c\/li\u003e\n\u003cli\u003eWill fit EG, DC, EK H22A Swapped Cars\u003c\/li\u003e\n\u003cli\u003eWorks with H2B and H22 swaps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Untested in Prelude\/Accord chassis - custom radiator setup will be required.\u003c\/p\u003e","brand":"PLM","offers":[{"title":"Default Title","offer_id":29175600775267,"sku":"PLM-H-T3","price":1699.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Screen-Shot-2019-01-21-at-7.47.10-PM.png?v=1580877677"},{"product_id":"plm-t3-top-mount-turbo-manifold-d-series","title":"PLM T3 Top Mount Turbo Manifold - D Series","description":"\n\u003cp\u003ePLM Private Label Mfg. Power Driven T3 Top Mount Turbo Manifold ( D Series - D13\/15\/16\/17) is designed to spool large turbos very quickly, producing massive midrange gains that carry to redline. This manifold is designed for any D series boosted application, where long-lasting quality is important! Top mount design looks rad too!\u003c\/p\u003e\n\u003cp\u003eHalf size radiator required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand New In Box\u003c\/li\u003e\n\u003cli\u003eD-Series Motor (D15, D16, D16Z6, D16Y8)\u003c\/li\u003e\n\u003cli\u003eMade of 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003eOne year limited warranty\u003c\/li\u003e\n\u003cli\u003eMachined CNC manifold flange\u003c\/li\u003e\n\u003cli\u003e12.5mm thick flanges\u003c\/li\u003e\n\u003cli\u003eThick 8 gauge \/ Schedule 40 pipe\u003c\/li\u003e\n\u003cli\u003eOne piece design\u003c\/li\u003e\n\u003cli\u003e44mm wastegate flanges\u003c\/li\u003e\n\u003cli\u003eNOT A\/C or Power Steering compatible\u003c\/li\u003e\n\u003cli\u003eSurfaced Head Flange For Perfect Seal\u003c\/li\u003e\n\u003cli\u003eFully Ported Low Angle Merge Collector\u003c\/li\u003e\n\u003cli\u003eProfessionally TIG welded and assembled\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLM","offers":[{"title":"Default Title","offer_id":29175600808035,"sku":"PLM-D-T3-TOP","price":1321.4,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Screen-Shot-2019-01-22-at-8.19.02-PM.png?v=1580877716"},{"product_id":"plm-t3-ramhorn-turbo-manifold-sr20det-rwd","title":"PLM T3 Ramhorn Turbo Manifold - SR20DET (rwd)","description":"\n\u003cp\u003ePrivate Label MFG Power Driven Top Mount T3 Ramhorn turbo manifold (SR20DET) AC Compatible is designed to spool large turbos very quickly, producing massive midrange gains that carry to redline. This manifold is designed for any RWD SR20DET Series boosted application, where long-lasting quality is important!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand New In Box\u003c\/li\u003e\n\u003cli\u003eMade of 304 Stainless steel\u003c\/li\u003e\n\u003cli\u003eOne year limited warranty\u003c\/li\u003e\n\u003cli\u003eMachined CNC-ed manifold flange\u003c\/li\u003e\n\u003cli\u003e12.5mm thick flanges\u003c\/li\u003e\n\u003cli\u003eTgauge8 guage\/Schedule 40 pipe\u003c\/li\u003e\n\u003cli\u003eOne piece design\u003c\/li\u003e\n\u003cli\u003e44mm wastegate flange\u003c\/li\u003e\n\u003cli\u003eAC compatible\u003c\/li\u003e\n\u003cli\u003eSurfaced Head Flange For Perfect Seal\u003c\/li\u003e\n\u003cli\u003eFully Ported Low Angle Merge Collector\u003c\/li\u003e\n\u003cli\u003eProfessionally Tig welded and assembled\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLM","offers":[{"title":"Default Title","offer_id":29175602643043,"sku":"PLM-SR-TM-AC","price":1840.77,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Screen-Shot-2019-01-22-at-8.25.01-PM.png?v=1580877739"},{"product_id":"corksport-stainless-cat-back-exhaust-system-ms3-gen-1","title":"CorkSport Stainless Cat Back Exhaust System - MS3 Gen 1","description":"\u003cp\u003e\u003cstrong\u003eIf this product is not in stock please check availability with us first before ordering.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CorkSport Power Series Mazdaspeed 3 Cat Back Exhaust for the 2007-2009 Mazdaspeed 3 delivers optimal flow and minimal backpressure. Our Speed3 cat-back exhaust features mandrel-bent 80mm piping and a straight-through high flow muffler for a smooth flow, increased power, and faster spool up. Corrosion-resistant T304 Stainless Steel construction ensures long life; stainless steel muffler packing means no worrying about burning out and rattling on your Mazdaspeed. As with all of our CorkSport brand parts, the Speed 3 Power Series cat-back exhaust is precision TIG welded, making for a solid connection, cleaner look, and powerful presence.\u003c\/p\u003e\n\u003cp\u003eGains of 19 wheel HP with the installation of the Mazdaspeed 3 cat-back exhaust have been recorded.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThe CorkSport Advantage:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStainless Steel T304 construction for corrosion resistance and clean stylish look.\u003c\/li\u003e\n\u003cli\u003eMandrel bent, true 80mm piping for increased flow and more power from your engine\u003c\/li\u003e\n\u003cli\u003eStainless steel muffler packing for a deep tone and long life for your Mazdaspeed3\u003c\/li\u003e\n\u003cli\u003eCorkSport Service and Support: Receive a 2-year warranty, full colour installation instructions \u0026amp; all of the needed installation hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/N1yi_SWsA3A\" height=\"785\" width=\"1047\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"CorkSport Exhausts","offers":[{"title":"Default Title","offer_id":32755102482531,"sku":"AXE-6-110-10","price":1595.6,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Mazdaspeed-3-cat-back-exhaust.jpg?v=1580877838"},{"product_id":"skunk2-alpha-header-b-series-v2","title":"Skunk2 Alpha Header - B Series - V2","description":"\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eSkunk2 is proud to announce its all-new Alpha Series Header for the Honda B-Series engines. Patented after our already popular and dyno-proven MegaPower Headers, which have been used by leading, competitive race teams for years, Skunk2’s Alpha Series Header employs many of the same design characteristics and technology.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOur decision to produce the Alpha Series Header was driven by our desire to make our race-proven design more affordable and accessible to everyday enthusiasts. New manufacturing techniques allow us to do so at a lower overall cost, making race-winning header technology available to everyone. Skunk2’s Alpha Series Header for VTEC and non-VTEC B-series engines offers Skunk2 performance, industry-leading customer service, and a full warranty policy, all at a price comparable to lesser budget-minded headers. Unlike the budget-minded headers, though, only Skunk2 Alpha Series Headers ensure precise fitment and the peace of mind of knowing that a Skunk2 representative is just a phone call or email away.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAll Skunk2 headers are designed and engineered to maximize exhaust flow and increase both horsepower and torque throughout the powerband. The unique design is the result of more than a decade of racing experience coupled with computerized modeling and extensive dyno testing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe V2 header provides more clearance specifically for the Kraftwerks Supercharger Kit (150-05-0030B). Each Skunk2 Alpha Series Header features equal-length, sequentially paired, stepped primaries and a 4-2-1 tri-Y design that terminates into a collector with a 2.5-inch outlet. These features, paired with Skunk2’s unique design specs, provide an extremely broad powerband that’s applicable to a wide range of engine sizes and configurations. Alpha Series Headers also feature the smallest possible primary tubes required to achieve optimum overall and peak power. By minimizing the primary tubes’ diameter, Skunk2 is able to maintain the highest possible exhaust gas speed throughout the header, which improves mid-range power and throttle response significantly. Skunk2’s Alpha Series Header provides the perfect combination of top-end power without sacrificing mid-range performance or throttle response.\u003c\/span\u003e\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175612211299,"sku":"skk412-05-1902","price":1114.92,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/800x800_alpha_v2_b_header_3.jpg?v=1569190333"},{"product_id":"skunk2-mega-power-exhaust-del-sol","title":"Skunk2 Mega Power Exhaust - Del Sol","description":"\n\u003cp\u003eA properly designed exhaust system is critical to engine performance. Skunk2’s 60mm MegaPower Exhaust system for the '93-'97 del Sol S, Si, and VTEC was developed with this in mind and is based on more than 15 years’ worth of racing experience.\u003c\/p\u003e\n\u003cp\u003eDyno-proven for maximum horsepower, MegaPower cat-back systems are constructed of T-304 stainless steel, are robotically TIG welded, and feature CNC mandrel bends for a precise fit. Featuring Japanese-spec, Super N1 styling, MegaPower Exhaust systems generate more horsepower by optimizing engine airflow and volume through carefully selected, application-specific tubing lengths and diameters and increased wave scavenging effects for more horsepower. CNC mandrel bending allows for a constant tubing diameter throughout the bend, which results in precise fitment as well as improved exhaust gas flow. Each system is fitted with a resonator, includes stainless steel flanges, and is finished off with a straight-through, low-restriction racing muffler for uninterrupted flow.\u003c\/p\u003e\n\u003cp\u003eEach fully polished muffler is mated to a 110mm polished tip with its own acid-etched MegaPower badge and serialized nameplate. A Skunk2 removable silencer and all necessary hardware are also included. Skunk2’s MegaPower Exhaust lineup is based off of the same systems we custom build for our road racing and time attack vehicles. MegaPower Exhaust systems offer more performance, better build-quality, and the ultimate sound when compared to comparably priced systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e\u003cstrong\u003e: \u003cbr\u003e\u003c\/strong\u003eBolt-on system; no welding or fabrication necessary. May be compatible with engine swaps, however, will require basic welding and fabrication.\u003c\/p\u003e","brand":"Skunk2 Exhausts","offers":[{"title":"Default Title","offer_id":29175612276835,"sku":"skk413-05-2010","price":1383.62,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/413-05-2010.jpg?v=1569190333"},{"product_id":"turbosmart-upgraded-internal-wastegate-evo-x","title":"Turbosmart Upgraded Internal Wastegate - Evo X","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"justify\"\u003eDesigned like any Turbosmart product, with the highest of quality and precision, the Internal Wastegate Actuators (IWG) provide better turbo response and greater sensitivity when managing boost pressures. Each IWG is adjustable with several spring options and packaged in a kit form so they can be fitted as a direct bolt-on replacement for the factory part. It can't get any easier!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSilicone diaphragm with Nomex reinforcement to withstand high temperatures.\u003c\/li\u003e\n\u003cli\u003eHigh grade, billet aluminum construction.\u003c\/li\u003e\n\u003cli\u003eStainless steel rods and connecting clevis for corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eLocking Collar design cap allows for quick spring changes.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Turbosmart","offers":[{"title":"14psi","offer_id":29175628333155,"sku":"TS-0601-3142","price":300.09,"currency_code":"NZD","in_stock":true},{"title":"24psi","offer_id":29175628365923,"sku":"TS-0601-3242","price":300.09,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/turbosmart-tur-ts-0601-3182-4224119078982_4000x_2x.progressive_7f0815d8-b89a-45d4-9f4d-87fae06aeeb3.jpg?v=1741560721"},{"product_id":"yonaka-2-5-stainless-catback-exhaust-system-ef-crx","title":"Yonaka 2.5\" Stainless Catback Exhaust System - EF CRX","description":"\n\u003cp\u003eThis Yonaka Motorsports catback exhaust system is made of fully polished stainless steel, with 2.5″ OD mandrel bent piping, and a 4″ tip. Expect a quiet, clean, deep hum, without that irritating mid-range raspy sound.\u003c\/p\u003e\n\u003cp\u003eDirect bolt-on fit. All installation hardware is included.\u003c\/p\u003e\n\u003cp\u003eNote: Some USDM vs JDM\/NZDM differences may require basic modification.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"951\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/MC_m06WuYS4\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Yonaka - USA","offers":[{"title":"Default Title","offer_id":29175629414499,"sku":"YMCB-CRX","price":1404.15,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/YMCB-CRX-2.jpg?v=1580878319"},{"product_id":"plm-k-swap-header-v1-eg-ek-dc","title":"PLM K Swap Header V1 - EG\/EK\/DC","description":"\u003cdiv\u003eThis is it!  The best value, best performing K-Swap header on the market today.\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003ePLM Private Label Mfg. K-Series K-Swap Tri-Y header features a true stepped exhaust header design.  This K-Swap Tri-Y header delivers low to mid end power while utilizing a two piece design which maximizes the engine compartment space.\u003cbr\u003e\u003cbr\u003eFitment:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eK-Swap K20 K-Series\u003c\/li\u003e\n\u003cli\u003eHonda Civic EG \/ EK 1992 - 2000\u003c\/li\u003e\n\u003cli\u003eAcura Integra DC2 1994 - 2001\u003c\/li\u003e\n\u003cli\u003eWill\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003enot\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003efit CRX \/ EF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWill not fit K24 -\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/privatelabelmfg.com\/collections\/k-series-headers\/products\/plm-power-driven-rh-race-k-swap-4-2-1-ramhorn-header\" target=\"_blank\"\u003eGet the PLM K-Swap Ramhorn\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efor K24 Swap.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKey Features:\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBrand new in box\u003c\/li\u003e\n\u003cli\u003eMade of 304 stainless steel\u003c\/li\u003e\n\u003cli\u003eOne year warranty\u003c\/li\u003e\n\u003cli\u003eLong tube Tri-Y header\u003c\/li\u003e\n\u003cli\u003eTrue 2.5\" collector\u003c\/li\u003e\n\u003cli\u003eCNC machined manifold flanges\u003c\/li\u003e\n\u003cli\u003eFlange is .38\" which is just about 3\/8\" thick\u003c\/li\u003e\n\u003cli\u003e18 gauge 304 stainless steel.  Measured at .049\" to .050\"\u003c\/li\u003e\n\u003cli\u003eTwo piece slip-fit design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgradable as you modify your motor, with the following exhaust collector options:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMerge collector option.\u003c\/li\u003e\n\u003cli\u003eMegaphone collector option.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"PLM","offers":[{"title":"Default Title","offer_id":39861956083811,"sku":"PLM-HK20-HEADER","price":1053.11,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/PLM-HK20-HEADER-3T.jpg?v=1725841846"},{"product_id":"vibrant-streetpower-round-muffler","title":"Vibrant StreetPower Round Muffler","description":"\n\n\u003cp\u003eFeature Vibrant's \"True Straight Through\" perforated internals for unrestricted flow and maximum horsepower.\u003c\/p\u003e\n\u003cp\u003ePremium quality, multi-layered sound absorption materials are used to produce a low, deep exhaust tone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMuffler Size: 6\" Round Muffler Body, 14\" Long Overall Length: 19\"\u003c\/li\u003e\n\u003cli\u003ePolished stainless finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vibrant Performance","offers":[{"title":"2.5\"","offer_id":29175708614755,"sku":"vib1118","price":384.63,"currency_code":"NZD","in_stock":true},{"title":"3\"","offer_id":29175708647523,"sku":"vib1119","price":400.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/1118_WEBL.jpg?v=1580879286"},{"product_id":"vibrant-streetpower-oval-muffler","title":"Vibrant StreetPower Oval Muffler","description":"\n\n\u003cp\u003eFeature Vibrant's \"True Straight Through\" perforated internals for unrestricted flow and maximum horsepower. Premium quality, multi-layered sound absorption materials are used to produce a low, deep exhaust tone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMuffler Size: 5\" x 9\" Oval\u003c\/li\u003e\n\u003cli\u003eMuffler Body, 15\" Long\u003c\/li\u003e\n\u003cli\u003eOverall Length: 20\"\u003c\/li\u003e\n\u003cli\u003ePolished Stainless Finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vibrant Performance","offers":[{"title":"2.5\"","offer_id":29175708811363,"sku":"vib1102","price":403.06,"currency_code":"NZD","in_stock":true},{"title":"3\"","offer_id":29175708844131,"sku":"vib1103","price":414.57,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/1102_WEBL.jpg?v=1633652859"},{"product_id":"skunk2-alpha-headers-k20-dc5-ep3","title":"Skunk2 Alpha Headers - DC5\/EP3","description":"\n\u003cp\u003eSkunk2 is proud to introduce its Alpha Series Header for the 02-06 DC5 and 02 - 05 EP3. Patterned after their already popular and dyno-proven MegaPower Headers, which have been used by leading, competitive race teams for years, Skunk2's Alpha Series Header employs many of the same design characteristics and technology. Skunk2's engineers wanted to offer the same custom racing headers they use on the company's own cars to enthusiasts at a good value, but without compromising quality. The process has taken years, but thanks to cutting-edge design, manufacturing technology, and craftsmanship, Skunk2's produced the finest production header available. Similar MegaPower Headers power each of the championship-winning, Compass 360 Racing Grand-Am Cup Hondas and Acuras. In a \u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003eclass where competitors are not allowed to modify intakes and throttle bodies, the header and exhaust system become the keys to finding additional power.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAll Skunk2 headers are designed and engineered to maximize exhaust flow and increase both horsepower and torque throughout the powerband. The unique design is the result of more than a decade of racing experience coupled with computerized modeling and extensive dyno testing. Each Skunk2 Alpha Series Header features equal-length, sequentially paired, stepped primaries and a 4-2-1 tri-Y design that terminates into a collector with a 2.5-inch outlet. These features, paired with Skunk2's unique design specs, provide an extremely broad powerband that's applicable to a wide range of engine sizes and configurations.\u003c\/p\u003e\n\u003cp\u003eAlpha Series Headers also feature the smallest possible primary tubes required to achieve optimum overall and peak power. By minimizing the primary tubes diameter, Skunk2 is able to maintain the highest possible exhaust gas speed throughout the header, which improves mid-range power and throttle response significantly. Skunk2's Alpha Series Header provides the perfect combination of top-end power without sacrificing mid-range performance or throttle response.\u003c\/p\u003e\n\u003cp\u003eSkunk2's Alpha Series Header for the RSX is designed to clear the OEM anti-sway bar (K24 engines require downward-hoop-type anti-sway bar) and is compatible with most aftermarket exhaust systems that bolt to the factory location using factory mounting points (MegaPower RR Exhaust requires fabrication of supplied header adapter).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplement with a genuine Skunk2 MegaPower Exhaust system for maximum exhaust flow.\u003c\/li\u003e\n\u003cli\u003eIncludes adapter pipe, donut gasket, and oxygen sensor defouler.\u003c\/li\u003e\n\u003cli\u003eRace application; eliminates catalytic converter.\u003c\/li\u003e\n\u003cli\u003eO2 sensor bung thread pitch: M18 x 1.5.\u003c\/li\u003e\n\u003cli\u003eHeader WILL fit the EP3 Chassis but requires modification of the exhaust or the adapter to bolt-up properly with the rest of the exhaust system.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175711891555,"sku":"skk412-05-1910","price":1182.78,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/rsx-001_2.jpg?v=1569190344"},{"product_id":"tegiwa-stainless-o2-weld-on-bung","title":"Tegiwa Stainless O2 Weld-On Bung","description":"\n\u003cp\u003eMade from stainless steel, this boss is ideal if you need to run an extra sensor or even if you are building a custom exhaust system. We also sell the bung to fit this thread\u003c\/p\u003e","brand":"Tegiwa","offers":[{"title":"Default Title","offer_id":29175711924323,"sku":"T-4040015","price":21.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/tegiwa-o2-boss.jpg?v=1580789977"},{"product_id":"speedfactory-stainless-ramhorn-turbo-manifold-d-b-series-a-c-compatible","title":"SpeedFactory Stainless Ramhorn Turbo Manifold - D\/B Series (A\/C Compatible)","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e*Allow 12 weeks for production before shipping*\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe SpeedFactory Racing A\/C Compatible RamHorn produces great spool and offers impressive top-end performance, making it the ultimate manifold for street cars with heavily modified\/built engines utilizing smaller to medium sized turbochargers.\u003c\/p\u003e\n\u003cp\u003eThe Ramhorn is constructed from high quality 1.5” Schedule 40 polished stainless steel, and is TIG-Welded and back purged to ensure that you are receiving the highest quality product possible. Our cylinder head, wastegate, and turbine inlet flanges are CNC machined from ½” plate 1018 Steel and all mating surfaces are machined flat ensuring a perfect seal.\u003c\/p\u003e\n\u003cp\u003eFor clearance reasons, this manifold is only available with a 38\/40mm V Band wastegate flange and T3 turbo flange.\u003c\/p\u003e","brand":"SpeedFactory","offers":[{"title":"B Series","offer_id":29175745085539,"sku":"SF-04-002-AC","price":2218.22,"currency_code":"NZD","in_stock":true},{"title":"D Series","offer_id":29175745052771,"sku":"SF-04-005-AC","price":2218.22,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Screen-Shot-2018-11-23-at-5.41.11-PM.png?v=1580879582"},{"product_id":"plm-bonnet-exit-drag-header-b-series","title":"PLM Bonnet Exit Drag Header - B Series","description":"\n\u003cp\u003ePrivate Label MFG Power Driven B-Series hood exit race header (4-1 Megaphone) features a true 4-1 Megaphone merge to create equal exhaust flow. This header delivers the best peak horsepower gains while utilizing a 2 piece design. This is ideal for all forms of competition; Autocross, Drag racing and road racing. Recommended for 1.8L-2.2L engine displacements\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e1992-2000 Civic\u003c\/li\u003e\n\u003cli\u003e1993-1997 Del Sol\u003c\/li\u003e\n\u003cli\u003e1994-2001 Acura Integra\u003c\/li\u003e\n\u003cli\u003e1988-1991 Honda CRX with any B Series engine swapped into it. (aftermarket traction bar is a must)\u003c\/li\u003e\n\u003cli\u003e1990-1993 Acura Integra (aftermarket traction bar is a must)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand New In Box\u003c\/li\u003e\n\u003cli\u003eMade of 304 Brushed Stainless steel(S\/S)\u003c\/li\u003e\n\u003cli\u003eHand TIG Welded\u003c\/li\u003e\n\u003cli\u003eModification needed for AC and PS usage\u003c\/li\u003e\n\u003cli\u003eo2 extension needed\u003c\/li\u003e\n\u003cli\u003eCNC-ed machined manifold flange\u003c\/li\u003e\n\u003cli\u003eOne year warranty\u003c\/li\u003e\n\u003cli\u003e18G on the 304 S\/S. Measured at .049\" to .050\"\u003c\/li\u003e\n\u003cli\u003eOEM spec header gasket ($20+ value) INCLUDED\u003c\/li\u003e\n\u003cli\u003eExhaust heat shield trim ($50+ value) INCLUDED\u003c\/li\u003e\n\u003cli\u003eHalf core radiator must be used with slim fan\u003c\/li\u003e\n\u003cli\u003eComes pre-assembled (two piece design)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"PLM","offers":[{"title":"Default Title","offer_id":29175778443363,"sku":"PLM-HB-HOOD-HEADER","price":2021.13,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Untitled-1_d0a9ed69-8ff0-4b42-abd2-0aebbefb1dac.png?v=1622109284"},{"product_id":"skunk2-meg-apower-r-stainless-exhaust-ep3-70mm","title":"Skunk2 Mega Power R Stainless Exhaust - EP3 70mm","description":"\n\u003cp\u003eA properly designed exhaust system is critical to engine performance. Skunk2’s 70mm MegaPower Exhaust system for the '02-'05 Civic Si was developed with this in mind and is based off of more than 15 years’ worth of racing experience. Dyno-proven for maximum horsepower, MegaPower R cat-back systems are constructed of T-304 stainless steel, are robotically TIG welded, and feature CNC mandrel bends for a precise fit.\u003c\/p\u003e\n\u003cp\u003eDesigned for naturally aspirated engines featuring higher compression, aggressive camshafts, and racing headers as well as for mild turbocharged applications that require more exhaust flow than Skunk2’s 60mm MegaPower Exhausts provide, MegaPower R Exhausts allow engines to breathe more efficiently and produce more power thanks to larger diameter piping. MegaPower R Exhaust systems were designed for maximum flow and power, featuring oversized tubing and mufflers, which results in a significantly louder tone when compared to 60mm MegaPower systems.\u003c\/p\u003e\n\u003cp\u003eFeaturing Japanese-spec, Super N1 styling, MegaPower R Exhaust systems generate more horsepower by optimizing engine airflow and volume through carefully selected, application-specific tubing lengths and diameters and increased wave scavenging effects for more horsepower. CNC mandrel bending allows for a constant tubing diameter throughout the bend, which results in precise fitment as well as improved exhaust gas flow. Each system is fitted with a resonator, includes stainless steel flanges, and is finished off with a straight-through, low-restriction racing muffler for uninterrupted flow. Each fully polished muffler is mated to a 110mm polished tip with its own acid-etched MegaPower badge and serialized nameplate. A Skunk2 removable silencer and all necessary hardware are also included. Skunk2’s MegaPower Exhaust lineup is based off of the same systems we custom build for our road racing and time attack vehicles.\u003c\/p\u003e\n\u003cp\u003eMegaPower Exhaust systems offer more performance, better build-quality, and the ultimate sound when compared to comparably priced systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment: \u003c\/strong\u003e2002 - 2005 Honda Civic (Si)\u003c\/p\u003e","brand":"Skunk2 Exhausts","offers":[{"title":"Default Title","offer_id":29175778803811,"sku":"skk413-05-5020","price":1489.14,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/413-05-5020.jpg?v=1569190347"},{"product_id":"skunk2-alpha-headers-mx5-nc","title":"Skunk2 Alpha Headers - MX5 NC","description":"\n\u003cp\u003eSkunk2 is proud to announce its all-new Alpha Series Header for the ’06-’13 NC Miata. Patterned after our already popular and dyno-proven MegaPower Headers, which have been used by leading, competitive race teams for years, Skunk2’s Alpha Series Header employs many of the same design characteristics and technology. Our decision to produce the Alpha Series Header was driven by our desire to make our race-proven design more affordable and accessible to everyday enthusiasts. Skunk2’s Alpha Series Header for the NC Miata offers Skunk2 performance, industry-leading customer service, and full warranty policy, all at a price comparable to lesser budget-minded headers. Unlike the budget-minded headers, though, only Skunk2 Alpha Series Headers ensure precise fitment and the peace of mind of knowing that a Skunk2 representative is just a phone call or email away.\u003c\/p\u003e\n\u003cp\u003eAll Skunk2 headers are designed and engineered to maximize exhaust flow and increase both horsepower and torque throughout the powerband. The unique design is the result of more than a decade of racing experience coupled with computerized modeling and extensive dyno testing. Each Skunk2 Alpha Series Header features equal-length and a 4-1 design that terminates into a True Merged collector with a 2.5-inch outlet. These features, paired with Skunk2’s unique design specs, provide an extremely broad powerband that’s applicable to a wide range of engine sizes and configurations. Alpha Series Headers also feature bung provisions for OEM sensors. Each header is constructed from stainless steel with mandrel-bent tubing for added strength, corrosion resistance, and durability.\u003c\/p\u003e\n\u003cp\u003eThese headers eliminate the catalytic converter.\u003c\/p\u003e\n\u003cp\u003e2006 - 2013 Mazda MX-5 (Club, Grand Touring, GS, GT, GX, Sport)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Due to LHD vs RHD difference - namely the steering column - some modification is required for fitting.  The o2 sensor must be repositioned on a different angle and slight massaging of the runner closest to the column is recommended to avoid contact when the motor moves under load.\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175783391331,"sku":"skk412-10-1900","price":1217.67,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/800x800_miata_nc_alpha_header_1.jpg?v=1569190348"},{"product_id":"yonaka-2-5-stainless-catback-exhaust-system-cf4-cl1","title":"Yonaka 2.5\" Stainless CatBack Exhaust System - CF4\/CL1","description":"\u003cp\u003eThis Yonaka Motorsports catback exhaust system is made of fully polished stainless steel, with 2.5″ OD mandrel bended piping, and a 4.25″ tip. Expect a quiet, clean, deep hum, without that irritating mid range raspy sound.\u003c\/p\u003e\n\u003cp\u003eDirect bolt-on fit. All installation hardware is included.\u003c\/p\u003e\n\u003cp\u003eWarranty: 1 year\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e These are designed for USDM accord - some basic modification is required for CF4\/CL1 fitment but these are the best\/closest thing you'll find to an off the shelf, locally available option.\u003c\/p\u003e","brand":"Yonaka - USA","offers":[{"title":"Default Title","offer_id":29175799119971,"sku":"YMCB006","price":1404.15,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/YMCB006-2.jpg?v=1580879987"},{"product_id":"yonaka-stainless-v-band-flange-clamp-assembly","title":"Yonaka Stainless V-Band Flange \u0026 Clamp Assembly","description":"\u003cp\u003eMaterial: Stainless steel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 male flange\u003c\/li\u003e\n\u003cli\u003e1 female flange\u003c\/li\u003e\n\u003cli\u003e1 clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWarranty: 1 year\u003c\/p\u003e","brand":"Yonaka - Canada","offers":[{"title":"2.5\"","offer_id":29175799709795,"sku":"YMVBC25","price":55.97,"currency_code":"NZD","in_stock":true},{"title":"3\"","offer_id":29175799742563,"sku":"YMVBC30","price":73.64,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/YMVBC30-5.jpg?v=1580880002"},{"product_id":"plm-power-driven-tri-y-header-fd2","title":"PLM Power Driven Tri-Y Header - FD2","description":"\n\u003cp\u003ePrivate Label MFG K-series FD Tri-Y header features a true step-up exhaust header design. The Tri-Y header delivers low to mid end power while utilizing a four piece design which maximizes the engine compartment space. This exhaust manifold is ideal for all forms of competition; Autocross, drag racing and road racing.\u003c\/p\u003e\n\u003cp\u003e*Includes Cat Delete Pipe, Gaskets \u0026amp; all necessary hardware\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade of 304 Stainless steel\u003c\/li\u003e\n\u003cli\u003eOne year limited warranty\u003c\/li\u003e\n\u003cli\u003eShort tube Tri-Y header\u003c\/li\u003e\n\u003cli\u003eTrue 2.5″ collector\u003c\/li\u003e\n\u003cli\u003eMachined CNC-ed manifold flange\u003c\/li\u003e\n\u003cli\u003eFlange is .38″ which is just about 3\/8″ thick\u003c\/li\u003e\n\u003cli\u003e18G on the 304 S\/S. Measured at .049″ to .050″\u003c\/li\u003e\n\u003cli\u003eFive piece design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Due to a USDM vs JDM difference, the b pipe exhaust section will need lengthen to match up to the cat delete pipe, UNLESS you are using a USDM exhaust like Skunk2.\u003c\/p\u003e","brand":"PLM","offers":[{"title":"Default Title","offer_id":29175800594531,"sku":"PLM-HFG1-HEADER","price":1170.13,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/PLM-HFG1-HEADER-5T.jpg?v=1588307649"},{"product_id":"yonaka-2-5-stainless-catback-exhaust-system-cl7-9","title":"Yonaka 2.5\" Stainless Catback Exhaust System - CL7\/9","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWILL NOT FIT THE STATIONWAGON CM2 ACCORD\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis Yonaka Motorsports Catback exhaust system is made of fully polished stainless steel, with 2.5″ OD mandrel bent piping and 3.5″ tips. Expect a quiet, clean, deep hum, without that irritating mid range raspy sound.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDirect bolt-on fit. All installation hardware is included.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/uqzclZW8cQk\" height=\"535\" width=\"951\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/rxD23jzUIxg\" height=\"535\" width=\"951\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e \u003c\/p\u003e","brand":"Yonaka - USA","offers":[{"title":"Default Title","offer_id":29175897292899,"sku":"YMCB-TSX0408","price":1960.57,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/YMCB-TSX0408-3.jpg?v=1580880571"},{"product_id":"skunk2-mega-power-exhaust-s2000-ap1-ap2","title":"Skunk2 Mega Power Exhaust - S2000 AP1 \u0026 AP2","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eSkunk2 Mega Power Exhaust - S2000 AP1 \u0026amp; AP2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA properly designed exhaust system is critical to engine performance. Skunk2’s 60mm MegaPower Exhaust system for the '00-'09 S2000 was developed with this in mind and is based off of more than 15 years’ worth of racing experience. Dyno-proven for maximum horsepower, MegaPower cat-back systems are constructed of T-304 stainless steel, are robotically TIG welded, and feature CNC mandrel bends for a precise fit.\u003c\/p\u003e\n\u003cp\u003eFeaturing Japanese-spec, Super N1 styling, MegaPower Exhaust systems generate more horsepower by optimizing engine airflow and volume through carefully selected, application-specific tubing lengths and diameters and increased wave scavenging effects for more horsepower. CNC mandrel bending allows for a constant tubing diameter throughout the bend, which results in precise fitment as well as improved exhaust gas flow. Each system is fitted with a resonator, includes stainless steel flanges, and is finished off with a straight-through, low-restriction racing muffler for uninterrupted flow.\u003c\/p\u003e\n\u003cp\u003eEach fully polished muffler is mated to a 110mm polished tip with its own acid-etched MegaPower badge and serialized nameplate. A Skunk2 removable silencer and all necessary hardware are also included. Skunk2’s MegaPower Exhaust lineup is based off of the same systems we custom build for our road racing and time attack vehicles. MegaPower Exhaust systems offer more performance, better build-quality, and the ultimate sound when compared to comparably priced systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eBolt-on system; no welding or fabrication necessary.\u003c\/p\u003e","brand":"Skunk2 Exhausts","offers":[{"title":"Default Title","offer_id":29175905550435,"sku":"skk413-05-2025","price":1893.37,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/413-05-2025-1.jpg?v=1569190357"},{"product_id":"skunk2-alpha-header-accord-09-14","title":"Skunk2 Alpha Header - Accord 09-14","description":"\n\u003cp\u003eSkunk2’s Alpha Series Header utilizes our race-proven designs in a more affordable and accessible application to everyday enthusiasts. As a result, the 2009 and newer header was the perfect candidate to add to this line. The large bellmouth design with 3-inch diameter piping is manufactured from high quality cast stainless steel for superior heat resistance and strength. This design enables maximum extraction of airflow and increased power.\u003c\/p\u003e\n\u003cp\u003eHeavy duty thick flanges ensure secure and leak free attachments. Air flows smoothly through mandrel bent T-304 stainless steel and a high-quality stainless steel braided flex section. The one-piece design eliminates the need for the catalytic converter maximizing air flow and allowing for maximum power. Bungs are also included for the OEM O2 sensors. No modifications are needed as it is a direct bolt-on unit to the OEM exhaust cat-back location.\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175906435171,"sku":"skk412-05-1960","price":1027.48,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/800x800_tsx_4.jpg?v=1569190357"},{"product_id":"skunk2-alpha-header-s2000-ap1-ap2","title":"Skunk2 Alpha Header - S2000 AP1 \u0026 AP2","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eSkunk2 Alpha Header - S2000 AP1 \u0026amp; AP2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSkunk2 is proud to announce its all-new Alpha Series Header for Honda S2000's. Skunk2’s Alpha Series Header for the S2000 was designed with the ease of installation and maximizing horsepower gains in mind. Skunk2 Engineers took advantage of the decision to make an Alpha Series Header, and as a result have designed a header that produces more horsepower and directly fits any forced induction applications.\u003c\/p\u003e\n\u003cp\u003eOur decision to produce the Alpha Series Header was driven by our desire to make our race-proven design more affordable and accessible to everyday enthusiasts. New manufacturing techniques allow us to do so at a lower overall cost, making race-winning header technology available to everyone.\u003c\/p\u003e\n\u003cp\u003eSkunk2’s Alpha Series Header for S2000's offers Skunk2 performance, industry-leading customer service, and a full warranty policy, all at a price comparable to lesser budget-minded headers. Unlike the budget-minded headers, though, only Skunk2 Alpha Series Headers ensure precise fitment and the peace of mind of knowing that a Skunk2 representative is just a phone call or email away.\u003c\/p\u003e\n\u003cp\u003eAll Skunk2 headers are designed and engineered to maximize exhaust flow and increase both horsepower and torque throughout the powerband. The unique design is the result of more than a decade of racing experience coupled with computerized modeling and extensive dyno testing. Each Skunk2 Alpha Series Header features equal-length, sequentially paired, stepped primaries and a 4-2-1 tri-Y design that terminates into a collector with a 2.5-inch outlet. These features, paired with Skunk2’s unique design specs, provide an extremely broad powerband that’s applicable to a wide range of engine sizes and configurations.\u003c\/p\u003e\n\u003cp\u003eAlpha Series Headers also feature the smallest possible primary tubes required to achieve optimum overall and peak power. By minimizing the primary tubes’ diameter, Skunk2 is able to maintain the highest possible exhaust gas speed throughout the header, which improves mid-range power and throttle response significantly. Skunk2’s Alpha Series Header provides the perfect combination of top-end power without sacrificing mid-range performance or throttle response. Careful designing went into the design of the header allowing plenty of clearance between the header and frame rail and retention of the catalytic converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEqual-Length, Tri-Y Design\u003c\/li\u003e\n\u003cli\u003eT-304 Stainless Steel Construction\u003c\/li\u003e\n\u003cli\u003eUnique Cylinder Pairing\u003c\/li\u003e\n\u003cli\u003eSpecially Designed Steps\u003c\/li\u003e\n\u003cli\u003eThin-Wall, Cast Collector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eComplement with a genuine Skunk2 MegaPower Exhaust system for maximum exhaust flow.\u003cbr\u003e Includes Donut Gasket.\u003cbr\u003e O2 sensor bung thread pitch: M18 x 1.5.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Requires modification for RHD fitment.\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175906533475,"sku":"skk412-05-1940","price":1217.67,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/800x800_s2000_alpha_header_1.jpg?v=1569190358"},{"product_id":"plm-t3-twin-scroll-turbo-manifold-s2000-f-series","title":"PLM T3 Twin Scroll Turbo Manifold - S2000 (F Series)","description":"\n\u003cp\u003ePLM (Private Label Mfg.) Power Driven T3 Twin Scroll Turbo Manifold (S2000 - F20\/22C) is designed to spool large turbos very quickly, producing massive midrange gains that carry to redline. This manifold is designed for any S2000 boosted application, where long-lasting quality is important!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand New In Box\u003c\/li\u003e\n\u003cli\u003eF-Series Motor (F20C F22C)\u003c\/li\u003e\n\u003cli\u003e304 Stainless steel\u003c\/li\u003e\n\u003cli\u003eOne year limited warranty\u003c\/li\u003e\n\u003cli\u003eMachined CNC'd manifold flange\u003c\/li\u003e\n\u003cli\u003e12.5mm thick flange\u003c\/li\u003e\n\u003cli\u003eThick 8 gauge \/ Schedule 40 pipe\u003c\/li\u003e\n\u003cli\u003eOne piece design\u003c\/li\u003e\n\u003cli\u003eDual 38mm wastegate flanges\u003c\/li\u003e\n\u003cli\u003eSurfaced Head Flange For Perfect Seal\u003c\/li\u003e\n\u003cli\u003eFully Ported Low Angle Merge Collector\u003c\/li\u003e\n\u003cli\u003eProfessionally TIG welded and assembled\u003c\/li\u003e\n\u003cli\u003eVTEC solenoid Sensor will not be used on this unit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLM","offers":[{"title":"Default Title","offer_id":29175933894755,"sku":"PLM-AP1-TM","price":1699.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Screen-Shot-2019-01-21-at-8.15.16-PM.png?v=1580880984"},{"product_id":"plm-t4-top-mount-turbo-manifold-dual-wgates-b-series","title":"PLM T4 Top Mount Turbo Manifold (Dual W'Gates) - B Series","description":"\n\u003cp\u003ePrivate Label Mfg. Power Driven T4 split pulse top mount turbo manifold (B-Series B16 B18 B20) with dual wastegates is designed for drag racing builds where very larger turbos are being used in applications 800HP and above.\u003c\/p\u003e\n\u003cp\u003eDual wastegates provide very accurate boost control, required when pushing the limits!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand New In Box\u003c\/li\u003e\n\u003cli\u003eB-Series Motor\u003c\/li\u003e\n\u003cli\u003eMade of 304 Stainless steel\u003c\/li\u003e\n\u003cli\u003eOne year limited warranty\u003c\/li\u003e\n\u003cli\u003eMachined CNC'd manifold flange\u003c\/li\u003e\n\u003cli\u003e12.5mm thick flanges\u003c\/li\u003e\n\u003cli\u003eThick 8 gauge\/Schedule 40 pipe\u003c\/li\u003e\n\u003cli\u003eOne piece design\u003c\/li\u003e\n\u003cli\u003eDual 44mm wastegate flanges\u003c\/li\u003e\n\u003cli\u003eNot AC or Power Steering compatible\u003c\/li\u003e\n\u003cli\u003eSurfaced Head Flange For Perfect Seal\u003c\/li\u003e\n\u003cli\u003eFully Ported Low Angle Merge Collector\u003c\/li\u003e\n\u003cli\u003eProfessionally Tig welded and assembled\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLM","offers":[{"title":"Default Title","offer_id":29175934091363,"sku":"PLM-B-T4-TOP","price":1699.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Screen-Shot-2019-01-22-at-7.52.27-PM.png?v=1580881036"},{"product_id":"plm-t3-sidewinder-turbo-manifold-k-series","title":"PLM T3 Sidewinder Turbo Manifold - K Series","description":"\n\u003cp\u003ePLM Private Label Mfg. Power Driven T3 Sidewinder Turbo Manifold (K-Series K20 K24) is designed to spool large turbos very quickly, producing massive midrange gains that carry to redline. This manifold is designed for any k series boosted application, where long-lasting quality is important!\u003c\/p\u003e\n\u003cp\u003eThis manifold design fits every Honda K-Series chassis whether K-Swap or originally K powered model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand New In Box\u003c\/li\u003e\n\u003cli\u003eK-Series K20 K24 Motors\u003c\/li\u003e\n\u003cli\u003eMade of 304 Stainless steel\u003c\/li\u003e\n\u003cli\u003eOne year limited warranty\u003c\/li\u003e\n\u003cli\u003eMachined CNC'd manifold flange\u003c\/li\u003e\n\u003cli\u003e12.5mm Stainless Flanges\u003c\/li\u003e\n\u003cli\u003eThick 8 gauge \/ Schedule 40 pipe\u003c\/li\u003e\n\u003cli\u003eOne piece design\u003c\/li\u003e\n\u003cli\u003e44mm wastegate flange\u003c\/li\u003e\n\u003cli\u003eSurfaced Head Flange For Perfect Seal\u003c\/li\u003e\n\u003cli\u003eFully Ported Low Angle Merge Collector\u003c\/li\u003e\n\u003cli\u003eProfessionally TIG welded and assembled\u003c\/li\u003e\n\u003cli\u003eDepending on the wastegate selection, coolant lines may need to be modified or rerouted\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLM","offers":[{"title":"Default Title","offer_id":29175939727459,"sku":"PLM-K20-T3-OPEN","price":2057.6,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Screen-Shot-2019-01-21-at-7.34.24-PM.png?v=1580881078"},{"product_id":"plm-3-stainless-turbo-downpipes-b-series","title":"PLM 3\" Stainless Turbo Downpipes - B Series","description":"\n\u003cp\u003ePLM (Private Label Mfg.) Power Driven B-Series downpipes available for both the B-series RAMHORN A\/C \u0026amp; P\/S compatible turbo manifold and top mount turbo manifold.\u003c\/p\u003e\n\u003cp\u003eThis is a 3-inch downpipe that comes with a flex pipe and necessary hardware including flanges\/clamps\/gaskets as required.\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"product_description\"\u003eThe downpipe comes with 2 o2 bungs for wideband usage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTurbo selection will impact the position of the downpipe. Some modification may be necessary.\u003c\/p\u003e\n\u003cp\u003eDA and EF owners will require subframe modification or replacement with Innovative Mount Traction Bar to fit downpipe.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Ramhorn downpipe is V-Band and Top Mount downpipe is 4 Bolt.\u003c\/p\u003e","brand":"PLM","offers":[{"title":"Ram Horn","offer_id":29175940743267,"sku":"PLM-B-TM-AC-DP","price":849.0,"currency_code":"NZD","in_stock":true},{"title":"Top Mount","offer_id":29175940710499,"sku":"PLM-B-TOP-T3-DP","price":680.38,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Screen-Shot-2019-01-22-at-10.38.36-AM.png?v=1580881108"}],"url":"https:\/\/www.speedscience.co.nz\/collections\/exhaust-1.oembed?page=4","provider":"Speed Science","version":"1.0","type":"link"}