{"title":"Easter Sale Intake Systems","description":"","products":[{"product_id":"skunk2-cold-air-intake-kit-fd-civic","title":"Skunk2 Cold Air Intake Kit - FD Civic","description":"\u003cp\u003e\u003cstrong\u003eThis intake is for the FD Civic that has the RBC style intake. If unsure what intake you have on your car check the photo in the listing showing the intake kit fitted.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSkunk2 drew upon its experience and longstanding technical partnership with championship-winning Compass360 Racing when developing its all-new Cold-Air Intake for the 06-11 Civic Si. The results are the best performing, best fitting intake system available.\u003c\/p\u003e\n\u003cp\u003eSkunk2s Cold-Air Intake is manufactured from moulded polymer plastic for superior intake air insulation when compared to aluminium as well as for a smooth, continuous taper. When compared to aluminium, the thicker polymer material results in a superior thermal barrier and lower intake air temperatures. Each kit includes a 3.5-inch internal diameter lower tube and a tapered, 3.5-inch to 3.0-inch internal diameter upper tube that connects to the factory throttle body with a high-quality, silicone connector (larger diameter connector for use with Skunk2 throttle bodies or similar sold separately). The two-piece design and supplied MAF sensor adapter allows for compatibility with vehicles utilizing the factory ECU. A silicone coupler featuring a smooth, tapered transition between the two tubes is also included for vehicles equipped with aftermarket engine management systems that don't utilize MAF sensors.\u003c\/p\u003e\n\u003cp\u003eIn an effort to reduce the possibility of submerging the air filter during wet conditions, Skunk2s design positions the air filter downward-facing for approximately two inches of additional ground clearance when compared to competitors' designs that locate the air filter from the side. That, combined with a design that doesn't require cutting or modifying the factory fender liners, greatly reduces the chances of water entering the intake during wet conditions.\u003c\/p\u003e\n\u003cp\u003eEach Cold-Air Intake kit includes relocation hardware for the battery, ECU, fuse box, and cooling system reservoir tank as well as high-quality stainless steel clamps and mounting hardware. Unlike other intake systems, only Skunk2's unique design and brackets allow for the OEM battery to be retained. A specially shaped, silicone upper radiator hose is also included with each kit to ensure maximum clearance for the intake tubing and proper fitment.\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175344824419,"sku":"skk343-05-0100","price":669.65,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/dsc_0005_2_3.jpg?v=1569190307"},{"product_id":"injen-cold-air-intake-kit-cl7-9","title":"Injen Cold Air Intake Kit - CL7\/9","description":"\u003cdiv class=\"productDetailsTabContent large-padding-top\"\u003e\n\u003cp class=\"productDetailsTabContentText\"\u003eUnlock your engine's hidden power potential by replacing your restrictive stock intake with Injen's advanced SP Series Cold Air Intake. By reaching down behind your front bumper, it draws in colder, denser, fresher air for stronger, more efficient combustion.\u003c\/p\u003e\n\u003cp\u003eMore than just a cold air conduit, the SP Series Cold Air Intake is a high-tech, fine-tuned oxygen delivery system. The aerospace-grade T-6061 aluminum tubing is CNC mandrel bent, and the TIG welded brackets are perfectly positioned for a balanced fit inside your exact year, make and model. Plus, everything from the composite flanges to the urethane air filter is meticulously tested and tuned on Injen's in-house Dynojet.\u003c\/p\u003e\n\u003cp\u003eYour SP Series Cold Air Intake includes unique rubber vibra-mounts, stainless steel clamps and silicone hoses for a secure, shift-free installation. Best of all, Injen backs your SP Series Cold Air Intake with a Lifetime Warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"productDetailsTabContentList showLinks inlineLinks\"\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003eInjen's SP Series Cold Air Intake is custom-designed for a precise fit on your exact year, make and model\u003c\/li\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003eEnhances top-end power gains in high-performance vehicles\u003c\/li\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003eEngineered to fit right behind your front bumper, where it gathers fresher, denser, colder air\u003c\/li\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003eSP Series Cold Air Intakes force-feed rich oxygen into your engine cylinders, which improves combustion efficiency\u003c\/li\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003eWrought from premium slabs of aerospace-grade T-6061 billet aluminum—famous for its high strength, lightweight and excellent corrosion resistance\u003c\/li\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003eFor unrestricted airflow, the SP Series Cold Air Intake is CNC mandrel-bent\u003c\/li\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003eEvery SP Series Cold Air Intake includes a reusable, high-performance cotton-gauze air filter with a built-in velocity stack\u003c\/li\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003eDyno-proven for maximum, reliable horsepower gains\u003c\/li\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003eYour SP Series Cold Air Intake comes with stainless steel clamps, silicone hoses and detailed instructions for a simple at-home installation\u003c\/li\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003eInjen's groundbreaking rubber \"vibra-mount\" system cushions against engine torque\u003c\/li\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003e\u003cb\u003eInjen products are proudly made in the USA\u003c\/b\u003e\u003c\/li\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003e\u003cb\u003eYour SP Series Cold Air Intake is covered by a Lifetime Warranty\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Injen","offers":[{"title":"Black","offer_id":29175488839779,"sku":"injSP1431BLK","price":928.12,"currency_code":"NZD","in_stock":true},{"title":"Polished","offer_id":29175488872547,"sku":"injSP1431P","price":928.12,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/a74d711b3574b7ac3882617647fc3406.jpg?v=1580788465"},{"product_id":"injen-cold-air-intake-dc5-type-r","title":"Injen Cold Air Intake - DC5 Type R","description":"\n\u003cdiv class=\"productDetailsTabContent large-padding-top \"\u003e\n\u003cp class=\"productDetailsTabContentText\"\u003eUnlock your engine’s hidden power potential by replacing your restrictive stock intake with Injen’s advanced SP Series Cold Air Intake. By reaching down behind your front bumper, it draws in colder, denser, fresher air for stronger, more efficient combustion.\u003c\/p\u003e\n\u003cp\u003eMore than just a cold air conduit, the SP Series Cold Air Intake is a high-tech, fine-tuned oxygen delivery system. The aerospace-grade T-6061 aluminium tubing is CNC mandrel bent, and the TIG welded brackets are perfectly positioned for a balanced fit inside your exact year, make and model. Plus, everything from the composite flanges to the urethane air filter is meticulously tested and tuned on Injen’s in-house Dynojet.\u003c\/p\u003e\n\u003cp\u003eYour SP Series Cold Air Intake includes unique rubber vibra-mounts, stainless steel clamps and silicone hoses for a secure, shift-free installation. Best of all, Injen backs your SP Series Cold Air Intake with a Lifetime Warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"productDetailsTabContentList showLinks inlineLinks\"\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003eInjen’s SP Series Cold Air Intake is custom-designed for a precise fit on your exact year, make and model\u003c\/li\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003eEnhances top-end power gains in high-performance vehicles\u003c\/li\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003eEngineered to fit right behind your front bumper, where it gathers fresher, denser, colder air\u003c\/li\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003eSP Series Cold Air Intakes force-feed rich oxygen into your engine cylinders, which improves combustion efficiency\u003c\/li\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003eWrought from premium slabs of aerospace-grade T-6061 billet aluminium—famous for its high strength, light weight and excellent corrosion resistance\u003c\/li\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003eFor unrestricted air flow, the SP Series Cold Air Intake is CNC mandrel-bent\u003c\/li\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003eEvery SP Series Cold Air Intake includes a reusable, high-performance cotton-gauze air filter with a built-in velocity stack\u003c\/li\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003eDyno-proven for maximum, reliable horsepower gains\u003c\/li\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003eYour SP Series Cold Air Intake comes with stainless steel clamps, silicone hoses and detailed instructions for a simple at-home installation\u003c\/li\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003eInjen’s groundbreaking rubber “vibra-mount” system cushions against engine torque\u003c\/li\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003e\u003cb\u003eInjen products are proudly made in the USA\u003c\/b\u003e\u003c\/li\u003e\n\u003cli class=\"productDetailsTabContentListItem\"\u003e\u003cb\u003eYour SP Series Cold Air Intake is covered by a Lifetime Warranty\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Injen","offers":[{"title":"Black","offer_id":32378151403619,"sku":"injSP1477BLK","price":787.57,"currency_code":"NZD","in_stock":true},{"title":"Polished","offer_id":29175515742307,"sku":"injSP1477P","price":787.57,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Untitled-1_c574aefe-8c65-4d26-8c73-36899dc285bf.png?v=1600052240"},{"product_id":"injen-short-ram-intake-dc5-ep3-type-r","title":"Injen Short Ram Intake - DC5\/EP3 (Type R)","description":"\n\u003cdiv class=\"productDetailsTabContent large-padding-top \"\u003e\n\u003cp class=\"productDetailsTabContentText\"\u003eGet the most from your DC5 or EP3 with the SP Series air intake. This air intake system features Injen's patent pending Mega Ram (MR) Technology, allowing it to make impressive power gains that are also safe and reliable. It also feature a sleek black finish for added style.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures Innovative Step Down Process\u003cbr\u003e \u003c\/b\u003eStrategically control air flow with Injen's step down process! It will regulate airflow at strategic points within the air intake to control the rate and density of the air flowing through it for more reliable power gains.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWorld's First Dyno Tuned Intake System\u003cbr\u003e \u003c\/b\u003eThis Civic air intake is processed tuned to save you the hassle of calibrating the MAF sensors.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLifetime Warranty\u003cbr\u003e \u003c\/b\u003eEnjoy peace of mind when you purchase this air intake. It comes with a manufacturer's limited lifetime warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMade in the USA\u003cbr\u003e \u003c\/b\u003eLike other Injen performance parts, the Injen Acura RSX air intake is manufactured by expert craftsmen here in the United States.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Injen","offers":[{"title":"Black","offer_id":29175516004451,"sku":"injSP1476BLK","price":657.35,"currency_code":"NZD","in_stock":true},{"title":"Polished","offer_id":29175516037219,"sku":"injSP1476P","price":657.35,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/sp1476blk.jpg?v=1580788696"},{"product_id":"hybrid-racing-cold-air-intake-dc5-ep3","title":"Hybrid Racing Cold Air Intake - DC5\/EP3","description":"\n\u003cp\u003eDesigning an intake system with a set of guidelines isn't hard to achieve. However, building an intake system that not only fits every engine combination while allowing that setup to produce more power is. We chose to narrow that field and focus on what we consider to be the best recipe for power gains. With the success of our eight generation Civic Si intake system we used what we learned and created this system for our fellow DC5 RSX owners.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower is king.\u003c\/strong\u003e Due to size constraints inside of the DC5 chassis, the intake system was restricted to a 3-inch design. Combined with our high-flow velocity air filter, this Cold Air Intake System has shown gains of up to 10% (5-10hp) across the powerband compared to a short ram system while significantly reducing intake air temperatures. Don't want to relocate your battery? No problem. \u003cstrong\u003eThe Hybrid Racing DC5 intake allows for the battery to stay in the OEM location.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe intake requires a 70mm or larger throttle body and the RBC\/RRC\/Skunk2 Po Series style intake manifolds. Fitment or compatibility with an OEM PRB intake is not guaranteed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSlight trimming of the LH inner fender lining is required, and the removal or relocation of the OEM windshield washer bottle is needed. Alterations to cars running OEM Type R brake cooling ducts may be necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull Silicone Construction\u003c\/li\u003e\n\u003cli\u003eMost powerful RSX Intake on the market\u003c\/li\u003e\n\u003cli\u003eTrue 3-inch tube design\u003c\/li\u003e\n\u003cli\u003eIncludes 3\" velocity stack \u0026amp; filter\u003c\/li\u003e\n\u003cli\u003eRequires the use of 70mm TB\u003c\/li\u003e\n\u003cli\u003eRequires the RBC \/ RRC intake manifold\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 3\" Hybrid Racing Silicone Cold Air Intake Tube\u003c\/li\u003e\n\u003cli\u003e1 x Velocity Stack Air Filter\u003c\/li\u003e\n\u003cli\u003e1 x Silicone upper radiator hose (for PRB style coolant neck)\u003c\/li\u003e\n\u003cli\u003e1 x Valve cover breather filter\u003c\/li\u003e\n\u003cli\u003e1 x Lower filter bracket\u003c\/li\u003e\n\u003cli\u003e1 x Anti-vibration clamp\u003c\/li\u003e\n\u003cli\u003e1 x Stainless T-bolt clamp\u003c\/li\u003e\n\u003cli\u003e2 x Silicone hoses for breather connections\u003c\/li\u003e\n\u003cli\u003e2 x Machined aluminium push-in fittings\u003c\/li\u003e\n\u003cli\u003e5 x Hose Clamps\u003c\/li\u003e\n\u003cli\u003e2 x Bolts\u003c\/li\u003e\n\u003cli\u003e3 x Washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e EP3 owners - modification to lower bracket fog flight area may be necessary as well as potential battery relocation.\u003c\/p\u003e","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":29175562666083,"sku":"HYB-CAI-01-14","price":638.23,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/cold-air-intake-by-hybrid-racing-k-series-02-06-acura-rsx-0.jpg?v=1580788999"},{"product_id":"epman-universal-carbon-fibre-cold-air-box-intake-kit","title":"EPMAN Universal Carbon Fibre Cold Air Box Intake Kit","description":"\u003cp\u003eA simple and effective universal cold air intake it.\u003c\/p\u003e\n\u003cp\u003eSuitable for NA applications, simply connect the cold air box to OEM or aftermarket intake piping and then run the ducting to the front of the car for the cold air feed.\u003c\/p\u003e\n\u003cp\u003eThese are not designed to fit any car specifically.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePlease note this is an entry level budget product which is reflected in its pricing. Small burrs and scratches or lack in overall quality are not considered grounds for refund. Please opt for a higher quality brand if this is going to be an issue for your build.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"EPMAN","offers":[{"title":"Default Title","offer_id":29175885660259,"sku":"TK-FB2303-NF","price":157.38,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Screen-Shot-2019-05-24-at-10.15.03-PM.png?v=1580880494"},{"product_id":"hybrid-racing-cold-air-intake-system-fd-civic","title":"Hybrid Racing Cold Air Intake System - FD Civic","description":"\n\u003cp\u003eBig tube, big power!  We spent countless hours designing, testing, and refining this design to ensure it was the absolute best intake available for the 8th Gen Civic Si platform. This intake is designed to make big gains on any setup, from totally stock to high-lift cams and huge exhausts. Dyno graphs are provided to show the intake's effectiveness against its competitors, but for example, we saw 14hp peak gain and 9hp average gain against the stock air box. Against competing  3.5\" cold air intakes, we saw typical peak and average gains of around 2-3hp with a much smoother power band, meaning more power and better drivability.\u003c\/p\u003e\n\u003cp\u003eThe first and perhaps most obvious feature of this intake is its full silicone construction. The 1\/4\" thick fibreglass-reinforced silicone tubing is sturdy enough to withstand engine vacuum and insulates your intake charge better than any metal or plastic intake on the market. This leads to very cold intake air temperatures, meaning a denser air charge and more overall power. Another power-adding feature is the included velocity stack. This 6\" velocity stack is designed to lower inlet restrictions and allow more air into your engine, again leading to a denser, more powerful inlet charge.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eBuilt-in Anti-hydrolock bypass!\u003cbr\u003e \u003c\/b\u003eOne very cool component in this kit is the injection moulded air bypass manifold. This manifold serves a number of functions. It provides attachment points for the factory MAF as well as for the (included) silicone tubing that attaches to the factory valve cover vent and air bypass valve. It also has a built-in air bypass feature that allows air into the engine when the intake's filter becomes wet. This helps to avoid the dreaded hydro-lock that so many people normally worry about in heavy rain. We tested the bypass valve by totally submerging an air filter in a bucket of water and running the motor. Even when totally submerged, the engine idled and rev'd safely without hydro-locking. Of course, we still advise practicing caution when going through deep water in any car!\u003c\/p\u003e\n\u003cp\u003eThe biggest gain the bypass manifold provides is the reduction of parasitic Helmholtz resonance. The internal geometry of the air bypass manifold is designed to smooth out your power band. The end result is an intake that (on average) makes up to 14hp over the stock airbox and even 2-3 more horsepower than any other 3.5\" intakes. Also included with each kit is a powder-coated steel battery tray that relocates the battery in front of the transmission to make room for this intake's massive piping. We also provide a silicone upper radiator hose to give better clearance than the stock radiator hose. Silicone tubing is provided to replace the OEM rubber valve cover breather and air bypass tube. This gives the engine bay a cleaner, more finished appearance. The kit includes all of the bolts, hose clamps, and hardware needed to install the intake and battery tray.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTuning software required!\u003cbr\u003e \u003c\/b\u003eYou will need a tuning software like Hondata's Flash Pro to tune the car after installation. This kit should be run using MAP tunes only and should not be used with the factory ECU calibration. Please note this system is sold as a complete kit and is not offered in pieces.\u003c\/p\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eFull Silicone Construction for reduced heat soak\u003c\/li\u003e\n\u003cli\u003eMost powerful 8th Gen intake on the market\u003c\/li\u003e\n\u003cli\u003eBuilt-In Air Bypass helps to prevent hydro-locking\u003c\/li\u003e\n\u003cli\u003eIncludes 3.5\" velocity stack \u0026amp; filter\u003c\/li\u003e\n\u003cli\u003eIncludes battery relocation kit\u003c\/li\u003e\n\u003cli\u003eComes with couplers for large and small throttle bodies\u003c\/li\u003e\n\u003cli\u003eRequires tuning software like FlashPro\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eSome minor differences between USDM and JDM models may mean some basic modification is required.\u003c\/p\u003e","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":29176111136867,"sku":"HYB-CAI-01-10","price":829.7,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/2ab5a2cfae00833f2f47f99412d683b7_2000x_b2924018-174a-49cc-963b-ad9f74b296bc.jpg?v=1580791043"},{"product_id":"epman-whale-penis-intake-kit-eg-ek-dc","title":"EPMAN Whale Penis Intake Kit - EG\/EK\/DC","description":"\n\u003cp\u003eThe famous whale penis design, now in a more affordable plastic construction. Let's face it - the carbon fibre versions are A LOT extra just for that engine bay bling.\u003c\/p\u003e\n\u003cp\u003eEnjoy the same benefits for a fraction of the price. Increase power and torque throughout the rev range.\u003c\/p\u003e\n\u003cp\u003eQuality urethane-based filter included along with all required hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Not Suitable for ABS-equipped DC2's.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"EPMAN","offers":[{"title":"Black","offer_id":29176335663203,"sku":"TK-IN8036-BLK","price":88.9,"currency_code":"NZD","in_stock":true},{"title":"Blue","offer_id":29176335695971,"sku":"TK-IN8036-BLU","price":88.9,"currency_code":"NZD","in_stock":true},{"title":"Red","offer_id":29176335728739,"sku":"TK-IN8036-RED","price":88.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/2-TK-IN8036BK-6.jpg?v=1580792105"},{"product_id":"hybrid-racing-k-swap-cold-air-intake-eg-ek-dc","title":"Hybrid Racing K-Swap Cold Air Intake - EG\/EK\/DC","description":"\n\u003cp\u003eWe took a somewhat unconventional approach when it came time to design our K-Swap cold air intake. Our hope was to provide something that could improve upon the performance and appearance of competing cold air intakes...and the finished product is just that. What we ended up with was a true 3\" intake that does a better job of keeping your intake charge cool and your engine bay looking hot.\u003c\/p\u003e\n\u003cp\u003eThe most obvious feature on this intake is the 100% glass-reinforced silicone construction. By using silicone, we were able to create an intake that actually insulates the air going into the engine. For K-Swaps, this is particularly important since most setups put the cold air intake directly behind the radiator. What many people don't consider is that since aluminium is such a fantastic thermal conductor (hence why it is used in radiators), an aluminium cold air intake will actually absorb heat given off by the radiator. This increases the intake air temperature while decreasing the motor's performance. The silicone counteracts this by acting as a thermal barrier (much like header wrap)...this leads to lower intake air temps and a denser intake charge. Another benefit of the silicone construction is that there is no need for a coupler at the throttle body. The intake connects to the throttle body with just a single t-bolt clamp, meaningless turbulence as air enters the intake manifold.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eA less noticeable but very important feature of this intake is that it works with RBC, RRC, Skunk2 and PRB intake manifolds. Most competing k-swap intakes work with either the PRB intake manifold or the RBC\/RRC intake manifolds, but not both. We took the extra time to create an intake that would work with all 3! On top of that, we designed this kit to work with OEM k-series throttle bodies AND big bore throttle bodies. The included t-bolt clamp is custom designed to fit both applications.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAnd who can forget about looks...Everyone knows that with K-Swaps, making power and going fast is the name of the game, but looking good while you do it doesn't hurt either. That's why we made this one of the cleanest looking intakes on the market. When installed, only the intake tube and a single t-bolt clamp are visible. The hanger that attaches to the chassis is neatly tucked into the driver's side fender for the cleanest install possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull 3\" inner diameter.\u003c\/li\u003e\n\u003cli\u003eGlass-reinforced silicone construction.\u003c\/li\u003e\n\u003cli\u003eDesigned to keep intake air temps down\u003c\/li\u003e\n\u003cli\u003eIncludes velocity stack filter.\u003c\/li\u003e\n\u003cli\u003eStainless steel t-bolt clamp.\u003c\/li\u003e\n\u003cli\u003eWorks with PRB, RBC \u0026amp; RRC manifolds.\u003c\/li\u003e\n\u003cli\u003eCleanest intake on the market.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003cbr\u003e Fits EG\/DC\/EK chassis only\u003cbr\u003e Does not fit the EF chassis without modification to the lower bracket.\u003cbr\u003e Does not work with center-feed intake manifolds\u003c\/p\u003e","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":29176402935907,"sku":"HYB-CAI-01-02","price":468.03,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/vsvfassembled1_5.jpg?v=1580792577"},{"product_id":"injen-evolution-intake-system-fk8-type-r","title":"Injen Evolution Intake System - FK8 Type R","description":"\n\u003cp\u003e\"Boost up the performance of your 2017-2019 Honda Civic Type R (FK8) with Injen's all-new EVO1502 Evolution sealed cold air intake system.\u003c\/p\u003e\n\u003cp\u003eThe EVO1502 cold air intake was designed using advanced engineering tools to offer a top-quality kit that has no parallel. The EVO1502 one-piece sealed housing utilizes our patent-pending Twist-Lock technology to securely fasten our SuperNano-Web Dry air filter in place. The housing also has a molded scoop to retain the factory inlet. This inlet helps direct cool, dense air into the intake system for maximum power!\u003c\/p\u003e\n\u003cp\u003eInjen has put it all on the table to give you the greatest intake system possible!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to work with stock calibration\u003c\/li\u003e\n\u003cli\u003eAggressive intake grow under acceleration\u003c\/li\u003e\n\u003cli\u003eDurable Roto-Molded Polyethylene tube and housing\u003c\/li\u003e\n\u003cli\u003eTwist-Lock Technology to securely integrate the filter to the housing\u003c\/li\u003e\n\u003cli\u003eReinforced automotive grade silicone couplers\u003c\/li\u003e\n\u003cli\u003eStainless steel band clamps\u003c\/li\u003e\n\u003cli\u003eLarger inlet air scoop and induction tube\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":30336366805091,"sku":"injEVO1502","price":731.06,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/e1f28f3bbaff34296f677cf09f10b89e.jpg?v=1580793273"},{"product_id":"injen-evolution-intake-system-evo-x","title":"Injen Evolution Intake System - Evo X","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eInjen’s all new Evolution series sealed cold air intake system for the 2008-2015 Mitsubishi Lancer EVO X is unmatched in the aftermarket. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe EVO1800 is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. Let’s not forget the fully-functional ram air scoop that is molded directly into the air box! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis intake system also includes the revolutionary Injen Filter Monitor for quick and easy filter inspections. The EVO1800 housing encloses an Injen SuperNano-Web dry air filter to provide killer air flow, added performance, and outstanding engine protection. The EVO1800 comes with all necessary hardware to provide a simple and fast installation.\u003c\/span\u003e\u003c\/p\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":32237261717603,"sku":"injEVO1801","price":985.82,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/6e6600c868226c8f423d76146b90f544__98019.1582081604.jpg?v=1594008914"},{"product_id":"skunk2-cold-air-intake-13-20-brz-frs-ft86","title":"Skunk2 Cold Air Intake - '13-'20 BRZ\/ FRS\/ FT86","description":"\u003cdiv id=\"product-tabs\" class=\"overview\"\u003e\n\u003cdiv id=\"chldsec\" class=\"overview_content_inner tabs-panels\"\u003e\n\u003cdiv id=\"chsp_1\" class=\"panel\"\u003e\n\u003cp\u003eSkunk2’s Cold-Air Intake System for the Subaru BRZ, Scion FRS, and Toyota FT86 is manufactured from molded polymer plastic for superior intake air insulation compared to aluminum. The intake tube also has a smooth, continuous taper which greatly increases incoming air velocity. The thick polymer material also produces a superior thermal barrier for significantly lower intake air temperatures and drastically reduced heat soak issues that are common in other intakes.\u003c\/p\u003e\n\u003cp\u003eThe Skunk2 Cold Air Intake System is a true cold air intake as it draws in the coldest and highest pressure air available. This is achieved by placing the Ram Air Box’s inlet duct in front of the radiator where the most clean and cold air is found. The Ram Air Box is manufactured from crosslinked polymer to provide superior thermal rejection and structural strength as the air filter’s housing. Skunk2 Cold Air Intake system includes the Skunk2 Composite Velocity Stack which utilizes race proven technology and is engineered to optimize air flow while maximizing velocity.\u003c\/p\u003e\n\u003cp\u003eThe design also incorporates dimples on the entry surface to extend the boundary layer into the mouth. The dimples increase the effective cross sectional flow area causing higher total mass air flow compared to other velocity stacks. The smooth, continuous flow velocity taper of the tube decreases from 96 mm internal diameter to 70mm where it connects to the throttle body. The Cold Air Intake uses a massive 6.8” diameter double cone filter element which will allow for larger dust holding capacities. The cone filter is also washable which will avoid future expenses on a replacement filter. The supplied MAF Sensor Coupler is compatible with the factory MAF sensor for an easy bolt on application. No cutting or fabrication needed!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":32526248444003,"sku":"skk343-12-0050","price":839.38,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/343-12-0050_1_1.jpg?v=1589689574"},{"product_id":"corksport-2018-mazda-6-turbo-2-5l-2016-cx-9-2018-cx5-short-ram-intake-system","title":"CorkSport 2018+ Mazda 6 Turbo 2.5L \u0026 2016+ CX-9, 2018+ Cx5 - Short Ram Intake System","description":"\u003cp\u003e\u003cspan\u003eThe CorkSport Power Series Short Ram Intake replaces your restrictive factory airbox with a free flowing intake system to get more power and sound out of your 2.5L SkyActiv Turbo. Increase efficiency, power, and style under your hood with the CorkSport Short Ram Intake. Each component in the CS intake system was designed for function and fitment to get the best out of your Mazda 6 Turbo. Dynamometer testing showed gains of 8-12WHP and some of the best noises we’ve heard from a short ram intake that installs in as little as 30minutes!\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFit, Function, \u0026amp; Performance:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe CorkSport Short Ram Intake was specifically designed for the 2018+ Mazda 6 2.5T. The combination of a precision machined MAF housing, laminar flow silicone elbow, high flow dry-element air filter and formed anodized mounting bracket\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product_body\"\u003e\n\u003ch3\u003ePerformance \u0026amp; Sound:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe factory airbox in the Mazda 6 not only restricts airflow, but also the many turbo induction noises. As an added bonus, the audible turbo and bypass valve sounds are greatly improved and increased with the CorkSport Short Ram Intake. This will put a smile on your face whether you’re commuting to work or attacking a backroad. We highly suggest you watch the product video above if you haven’t yet.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product_body\"\u003e\n\u003ch3\u003eBolt-On Power Gains:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe increased efficiency of the Short Ram Intake System provides an 8-12whp increase from 4000rpm to redline. No tuning required for results and no check engine lights.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003ePrecision Machined:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eCorkSport MAF housings are CNC machined from 6061-T6 billet aluminum for precise dimensional tolerance. The MAF sensor monitors all airflow entering the engine, therefore MAF alignment and consistency of the MAF housing inner diameter is critical for proper air fuel ratios and ECU engine management\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product_body\"\u003e\n\u003ch3\u003eLaminar Flow:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eTurbulence and flow resistance is the #1 leading killer of performance from your Mazda. The CorkSport SRI replaces the turbulent ribbed rubber coupler with a 4-ply reinforced silicone coupler. This reduces turbulence within the airflow entering your Mazda’s engine, thus increasing efficiency and power.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product_body\"\u003e\n\u003ch3\u003eDry-Flow Filter:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eFiltration is key to a long lasting and reliable performance intake; that’s why every CorkSport Intake System utilizes an AEM Dry-Flow Air Filter for it’s superior filtration and airflow. The dry-flow filter is washable and reusable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"CorkSport","offers":[{"title":"Black \/ Black","offer_id":32625276616803,"sku":"ATK-6-117-61110","price":489.3,"currency_code":"NZD","in_stock":true},{"title":"Black \/ Red","offer_id":32625276649571,"sku":"ATK-6-117-61120","price":489.3,"currency_code":"NZD","in_stock":true},{"title":"Black \/ Blue","offer_id":32625276682339,"sku":"ATK-6-117-61130","price":489.3,"currency_code":"NZD","in_stock":true},{"title":"Red \/ Black","offer_id":32625276715107,"sku":"ATK-6-117-62110","price":489.3,"currency_code":"NZD","in_stock":true},{"title":"Red \/ Red","offer_id":32625276747875,"sku":"ATK-6-117-62120","price":489.3,"currency_code":"NZD","in_stock":true},{"title":"Red \/ Blue","offer_id":32625276780643,"sku":"ATK-6-117-62130","price":489.3,"currency_code":"NZD","in_stock":true},{"title":"Blue \/ Black","offer_id":42630055133283,"sku":"ATK-6-117-63110","price":489.3,"currency_code":"NZD","in_stock":true},{"title":"Blue \/ Red","offer_id":42630055264355,"sku":"ATK-6-117-63120","price":658.09,"currency_code":"NZD","in_stock":true},{"title":"Blue \/ Blue","offer_id":42630055460963,"sku":"ATK-6-117-63130","price":489.3,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/2018-mazda-turbo-intake-black.jpg?v=1591072062"},{"product_id":"corksport-2004-2009-mazda-3-short-ram-intake","title":"CorkSport 2004-2009 Mazda 3\/6 Short Ram Intake","description":"\u003cstrong\u003eGive your 2004-2009 Mazda 3\/6 immediate boosts in horsepower and torque\u003c\/strong\u003e by bringing more air into the intake chamber. Our simple to install SRI is MAF housing precision machined from billet aluminum with included air straightener. Designed to maintain optimal flow and generate ideal performance, CorkSport engineers each part with exacting tolerances and uses the latest in computer aided manufacturing techniques to make sure you get the highest quality, best performing part for your money. We have thoroughly tested this intake on both 2.0L and 2.3L engines.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe CorkSport Advantage:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePrevent air leaks and inaccurate readings that can cause check-engine lights: \u003c\/b\u003eThe MAF sensor is secured to the housing using T304 stainless fasteners for a rock solid connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable Dry Flow Air Filter: \u003c\/b\u003eReusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCustom reinforced silicone connector \u003c\/b\u003econstructed from multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCorkSport Service and Support:\u003c\/b\u003e Receive a 2 year warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CorkSport","offers":[{"title":"Black","offer_id":32700815704163,"sku":"Axe-6-117-BLK","price":460.74,"currency_code":"NZD","in_stock":true},{"title":"Blue","offer_id":32700815769699,"sku":"Axe-6-117-BLU","price":460.74,"currency_code":"NZD","in_stock":true},{"title":"Red","offer_id":32700815736931,"sku":"Axe-6-117-RED","price":460.74,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Mazda-6-cold-air-intake_zg6y-9r.jpg?v=1591072117"},{"product_id":"corksport-short-ram-intake-for-mazdaspeed-3","title":"CorkSport Short Ram Intake for Mazdaspeed 3","description":"\u003cp\u003e\u003cb\u003eOne of the easiest and most beneficial performance enhancements you can do for your vehicle,\u003c\/b\u003e\u003cspan\u003e the CorkSport Power Series Short Ram Intake replaces your factory airbox with an open intake system allowing more air into the intake chamber. The CorkSport Mazdaspeed 3 Short Ram Intake includes our precision machined MAF housing made from one piece of billet aluminum with included air straightener, durable dry flow air filter and custom reinforced silicone connector. In initial testing, the CorkSport Mazdaspeed 3 Short Ram Intake netted peak gains of +12HP and +17 lb torque.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe CorkSport Advantage:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrevent air leaks and inaccurate readings that can cause check-engine lights:\u003c\/strong\u003e The MAF housing is precision machined from billet aluminum with included air straightener.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Dry Flow Air Filter:\u003c\/strong\u003e Reusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom reinforced silicone connector\u003c\/strong\u003e constructed with multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel T-bolt clamps:\u003c\/strong\u003e Available in stealth black or polished stainless and ensure an airtight seal which prevents unmetered airflow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/corksport.com\/corksport-power-series-short-ram-intake-2010-mazdaspeed-3.html\"\u003eUpgrade to a CARB legal Stage Two Mazdaspeed Intake with a Turbo Inlet Pipe\u003c\/a\u003e\u003c\/strong\u003e For the best value on the market\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorksport Service and Support:\u003c\/strong\u003e Receive a two year warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"862\" height=\"431\" src=\"https:\/\/www.youtube.com\/embed\/-cXg3F0SQT4\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"CorkSport","offers":[{"title":"Black","offer_id":32700821733475,"sku":"Axl-6-115-BLK","price":460.74,"currency_code":"NZD","in_stock":true},{"title":"Blue","offer_id":32700821864547,"sku":"Axl-6-115-BLU","price":460.74,"currency_code":"NZD","in_stock":true},{"title":"Red","offer_id":32700821799011,"sku":"Axl-6-115-RED","price":460.74,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Axl-6-115.jpg?v=1591072251"},{"product_id":"corksport-2010-2013-mazda-3-short-ram-intake-2-0-skyactiv-and-standard","title":"CorkSport 2010-2013 Mazda 3 Short Ram Intake 2.0 Skyactiv and Standard","description":"\u003cp\u003e\u003cb\u003eOne of the easiest and most beneficial performance enhancements you can do for your vehicle,\u003c\/b\u003e\u003cspan\u003e the CorkSport Power Series Short Ram Intake replaces your factory airbox with an open intake system allowing more air into the intake chamber. Engineered with exacting tolerances, the CorkSport Mazda 3 Short Ram Intake includes our precision machined MAF housing made from billet aluminum, a durable dry flow air filter and custom reinforced silicone connector. The CorkSport 2010+ Mazda 3 Short Ram Intake has been designed for the 2.0L standard and now SkyActiv engines. In initial testing with the 2.0 Liter SkyActiv engine, the CorkSport Mazda 3 Short Ram Intake netted peak gains of +5 HP and +6 lb torque at the wheels.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe CorkSport Advantage:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable for 2.0 Liter Standard and SkyActiv* Gasoline Engines:\u003c\/strong\u003e In addition to the standard 2.0L engine, CorkSport has developed a new power series intake that will perform with the all new SkyActiv engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImprove Gas Mileage and Power: \u003c\/strong\u003eIn initial testing on the SkyActiv engine, the CorkSport SRI showed peak gains of +5 HP and +6 lb torque at the wheels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid Unwanted Check-Engine Lights: \u003c\/strong\u003eThe MAF housing is precision machined from billet aluminum to prevent air leaks and inaccurate readings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Dry Flow Air Filter: \u003c\/strong\u003eReusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Reinforced Silicone Connector:\u003c\/strong\u003e Constructed from multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorkSport Service and Support:\u003c\/strong\u003e Receive a 2 year warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Can be used with the gasoline engine only. Does not work on diesel engines. With the CorkSport Intake installed on the SkyActiv engine, at higher RPM's you may hear a slight ticking from the opening and closing of the injectors. This is completely normal and is what helps increase torque and fuel economy.\u003c\/p\u003e\n\u003cp\u003ePlease make sure of the model of 2.0 engine you have in your Mazda 3. The 2.0 Standard and 2.0 Skyactiv intakes are not interchangable.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"862\" height=\"431\" src=\"https:\/\/www.youtube.com\/embed\/hEM7svTEMdY\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"CorkSport","offers":[{"title":"Black \/ Non Skyactiv 2.0L","offer_id":39510487007331,"sku":"Axl-6-117-2-BLK","price":437.7,"currency_code":"NZD","in_stock":true},{"title":"Blue \/ Non Skyactiv 2.0L","offer_id":39510486974563,"sku":"Axl-6-117-2-BLU","price":437.7,"currency_code":"NZD","in_stock":true},{"title":"Red \/ Non Skyactiv 2.0L","offer_id":39510487040099,"sku":"Axl-6-117-2-RED","price":437.7,"currency_code":"NZD","in_stock":true},{"title":"Black \/ Skyactiv 2.0L","offer_id":32700703572067,"sku":"Axl-6-117-3-BLK","price":437.7,"currency_code":"NZD","in_stock":true},{"title":"Blue \/ Skyactiv 2.0L","offer_id":32700703539299,"sku":"Axl-6-117-3-BLU","price":437.7,"currency_code":"NZD","in_stock":true},{"title":"Red \/ Skyactiv 2.0L","offer_id":32700703604835,"sku":"Axl-6-117-3-RED","price":437.7,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Axl-6-117-100.jpg?v=1591072256"},{"product_id":"corksport-2010-2013-mazda-3-short-ram-intake-2-5-liter","title":"CorkSport 2010-2013 Mazda 3 \u0026 CX7 Short Ram Intake 2.5 Litre","description":"\u003cp\u003e\u003cstrong\u003eGive your 2010+ Mazda 3, Mazda 5 \u0026amp; CX7 immediate boosts in horsepower and torque\u003c\/strong\u003e by bringing more air into the intake chamber. Our simple to install SRI is MAF housing precision machined from billet aluminum with included air straightener. Designed to maintain optimal flow and generate ideal performance, CorkSport engineers each part with exacting tolerances and uses the latest in computer-aided manufacturing techniques to make sure you get the highest quality, best-performing part for your money.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe CorkSport Advantage:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid Unwanted Check-Engine Lights:\u003c\/strong\u003e The MAF housing is precision machined from billet aluminum to prevent air leaks and inaccurate readings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Dry Flow Air Filter:\u003c\/strong\u003e Reusable and water-resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Reinforced Silicone Connector:\u003c\/strong\u003e Constructed from multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso Fits:\u003c\/strong\u003e 2011-2013 Mazda 5 and 2010-2012 Cx7 2.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorkSport Service and Support:\u003c\/strong\u003e Receive a 2 year warranty, full colour installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CorkSport","offers":[{"title":"Black","offer_id":32700710912099,"sku":"Axl-6-117-25-BLK","price":437.7,"currency_code":"NZD","in_stock":true},{"title":"Blue","offer_id":32700710879331,"sku":"Axl-6-117-25-BLU","price":437.7,"currency_code":"NZD","in_stock":true},{"title":"Red","offer_id":32700710944867,"sku":"Axl-6-117-25-RED","price":437.7,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Axl-6-117-25.jpg?v=1591072257"},{"product_id":"corksport-mazdaspeed-3-stage-ii-power-series-short-ram-intake","title":"CorkSport Mazdaspeed 3\/6 Stage II Power Series Short Ram Intake","description":"\u003cp\u003e\u003cstrong\u003eGet +25 ft\/lb torque and +33 HP with our Mazdaspeed 3 Short Ram Intake.\u003c\/strong\u003e\u003cspan\u003e The CorkSport Stage II Short Ram Intake is the #1 upgrade for your car. Constantly touted as the best bang for your buck mod around, you can't go wrong with our Stage II SRI.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eThe CorkSport Advantage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCARB Approved:\u003c\/strong\u003e\u003cspan\u003e Meets California Air Resources Board (CARB) Emissions Standards\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eDyno Proven:\u003c\/strong\u003e Gain up to +25 lb. torque and +33 HP over stock with the Mazdaspeed 3 Short Ram Intake. (Dyno Run Mods = SRI + \u003ca href=\"https:\/\/corksport.com\/corksport-power-series-racepipe-2010-mazdaspeed-3.html\"\u003eRP \u003c\/a\u003e)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003ePrecision Machined:\u003c\/strong\u003e Includes MAF housing precision machined from billet aluminum along with air straightener.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eThe CorkSport Advantage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e 108 Color Combinations: you can customize the look of your SRI.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValue:\u003c\/strong\u003e Turbo Inlet Pipe included to save you money and give extra performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuality Engineered:\u003c\/strong\u003e Engineered to exact tolerances and manufactured using the latest in computer-aided techniques.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReusable Filter:\u003c\/strong\u003e Durable, washable and re-usable Dry Flow Air Filter that does not require oiling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineered in the USA:\u003c\/strong\u003e Designed and Engineered in Vancouver, Washington.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt On:\u003c\/strong\u003e No tune required for installation, and can be installed on a stock or heavily modified car.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorkSport service and support:\u003c\/strong\u003e Includes a 2-year limited warranty, full color installation instructions, and all necessary gaskets and hardware. We provide knowledgeable telephone support at 360-260-2675.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"862\" height=\"431\" src=\"https:\/\/www.youtube.com\/embed\/ZIA_qA2ukdI\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"CorkSport","offers":[{"title":"Black \/ Black \/ Polished","offer_id":43325905371235,"sku":"Axl-6-118-11110","price":595.68,"currency_code":"NZD","in_stock":true},{"title":"Black \/ Black \/ Black","offer_id":32700719497315,"sku":"Axl-6-118-11111","price":595.68,"currency_code":"NZD","in_stock":true},{"title":"Black \/ Red \/ Polished","offer_id":43325903011939,"sku":"Axl-6-118-11120","price":595.68,"currency_code":"NZD","in_stock":true},{"title":"Black \/ Red \/ Black","offer_id":43325903044707,"sku":"Axl-6-118-11121","price":595.68,"currency_code":"NZD","in_stock":true},{"title":"Black \/ Blue \/ Polished","offer_id":43325902946403,"sku":"Axl-6-118-11130","price":595.68,"currency_code":"NZD","in_stock":true},{"title":"Black \/ Blue \/ Black","offer_id":43325902979171,"sku":"Axl-6-118-11131","price":595.68,"currency_code":"NZD","in_stock":true},{"title":"Red \/ Black \/ Polished","offer_id":43325903274083,"sku":"Axl-6-118-12110","price":595.68,"currency_code":"NZD","in_stock":true},{"title":"Red \/ Black \/ Black","offer_id":43325903306851,"sku":"Axl-6-118-12111","price":595.68,"currency_code":"NZD","in_stock":true},{"title":"Red \/ Red \/ Black","offer_id":43325903241315,"sku":"Axl-6-118-12121","price":595.68,"currency_code":"NZD","in_stock":true},{"title":"Red \/ Blue \/ Polished","offer_id":43325903339619,"sku":"Axl-6-118-12130","price":645.05,"currency_code":"NZD","in_stock":true},{"title":"Red \/ Blue \/ Black","offer_id":43325903372387,"sku":"Axl-6-118-12131","price":595.68,"currency_code":"NZD","in_stock":true},{"title":"Red \/ Red \/ Polished","offer_id":32700719530083,"sku":"Axl-6-118-12220","price":595.68,"currency_code":"NZD","in_stock":true},{"title":"Blue \/ Black \/ Polished","offer_id":43325903110243,"sku":"Axl-6-118-13110","price":595.68,"currency_code":"NZD","in_stock":true},{"title":"Blue \/ Black \/ Black","offer_id":43325903143011,"sku":"Axl-6-118-13111","price":595.68,"currency_code":"NZD","in_stock":true},{"title":"Blue \/ Red \/ Polished","offer_id":43325903175779,"sku":"Axl-6-118-13120","price":645.05,"currency_code":"NZD","in_stock":true},{"title":"Blue \/ Red \/ Black","offer_id":43325903208547,"sku":"Axl-6-118-13121","price":645.05,"currency_code":"NZD","in_stock":true},{"title":"Blue \/ Blue \/ Polished","offer_id":42846445437027,"sku":"Axl-6-118-13130","price":595.68,"currency_code":"NZD","in_stock":true},{"title":"Blue \/ Blue \/ Black","offer_id":43325903077475,"sku":"Axl-6-118-13131","price":595.68,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/files\/3146495175_Axl-6-118-13130-1.webp?v=1718771349"},{"product_id":"corksport-mazdaspeed-3-3-inch-power-series-intake","title":"CorkSport Mazdaspeed 3, 3 inch Power Series Intake","description":"\u003cp\u003e\u003cstrong\u003eDramatically reduce intake restrictions and get an impressive improvement in power throughout the entire RPM range with the CorkSport Mazdaspeed Power Series 3\" Intake System.\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Mazdaspeed True 3\" Intake System is fabricated with a high polished 3 inch turbo inlet pipe and a true 3\" inside diameter MAF housing. The velocity stack design smooths air flow for maximum performance. If you plan on upgrading or have already upgraded your turbo this upgrade is a must to keep your MAF sensor functioning within its calibrated range.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUp to a 35% increase in air flow over the OEM Maf housing.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdvantages\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned Specifically for Mazda:\u003c\/strong\u003e All CorkSport parts have been designed and tested specifically for Mazdas.\u003c\/li\u003e\n\u003cli\u003eTrue 3\" MAF:\u003c\/li\u003e\n\u003cli\u003eMachined with a True 3\" inside diameter MAF.\u003c\/li\u003e\n\u003cli\u003eTurbo Inlet Pipe:\u003c\/li\u003e\n\u003cli\u003eA precision high polished 3\" aluminum turbo inlet pipe..\u003c\/li\u003e\n\u003cli\u003eVelocity Stack Design:\u003c\/li\u003e\n\u003cli\u003eSmooths the incoming air flow and increases the flow rate of air and reduces turbulence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Dry Flow Air Filter: \u003c\/strong\u003eReusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Reinforced Silicone Connectors:\u003c\/strong\u003e Constructed from multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpgraded Turbos:\u003c\/strong\u003e Highly recommended for Mazdaspeeds with upgraded turbos.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorkSport Service and Support:\u003c\/strong\u003e Receive a 2 year warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e** 07-09 Mazdaspeed 3 and Mazdaspeed 6 must make ecu or battery modifications for fitment.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e** Does not fit with CorkSport cold air box.** This system is not CARB approved..** MAF recalibration with \u003ca href=\"https:\/\/corksport.com\/cobb-tuning-mazdaspeed-3-mazdaspeed-6-access-port-tuner-v3.html\"\u003eAccessport\u003c\/a\u003e is required for product installation.*\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CorkSport","offers":[{"title":"Black","offer_id":32700959457379,"sku":"Axl-6-276-BLK","price":658.93,"currency_code":"NZD","in_stock":true},{"title":"Blue","offer_id":32700959391843,"sku":"Axl-6-276-BLU","price":658.93,"currency_code":"NZD","in_stock":true},{"title":"Red","offer_id":32700959424611,"sku":"Axl-6-276-RED","price":658.93,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Axl-6-276_3.jpg?v=1591072318"},{"product_id":"corksport-3-5-inch-mazdaspeed-3-power-series-intake-system","title":"CorkSport 3.5 inch Mazdaspeed 3 Power Series Intake System","description":"\u003cp\u003eOur 2010-2013 Mazdaspeed 3 Power Series 3.5\" Intake System is exactly what you have been searching for. Get ahead of other Mazdaspeeds on the road with an exceptional increase in horsepower and acceleration by way of more air flow. Additional benefits include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImmediate power gains\u003c\/li\u003e\n\u003cli\u003eLong-lasting air filter vs. OEM filters\u003c\/li\u003e\n\u003cli\u003eBoost in your engine's sound performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAre you ready to take your baby to the next level?\u003c\/p\u003e\n\u003ch2\u003eThe CorkSport Advantage\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTrue 3.5\" MAF:\u003c\/strong\u003e\u003cspan\u003e The Power Series 3.5\" system is a true 3.5\" inner diameter for maximum flow to get the most out of you performance mods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePerformance filter:\u003c\/strong\u003e A high performance dry-flow filter with 4\" opening to let your engine breathe without worry.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe turbo inlet pipe\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis constructed of CNC mandrel bent aluminum pipe polished to a mirror finish.\u003c\/p\u003e\n\u003ch2\u003eAdditional Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e The mass air-flow sensor (MAF) is manufactured from 6061-T6 billet aluminum. It is anodized for durability and great looks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM mounts and ports:\u003c\/strong\u003e Mounts to the OEM TIP location. Includes the OEM ports for the PCV, Boost Vent and BPV.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequirement:\u003c\/strong\u003e An aftermarket battery box is required due to space constraints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e Manufactured and assembled right here in Vancouver, Washington.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorkSport service and support:\u003c\/strong\u003e Includes a 2-year limited warranty, full color installation instructions, all necessary components, and knowledgeable telephone support at 360-260-2675.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CorkSport","offers":[{"title":"Black \/ Polished","offer_id":32627216482403,"sku":"AXL-6-289-81110","price":723.33,"currency_code":"NZD","in_stock":true},{"title":"Black \/ Powder Coated Black","offer_id":32627216580707,"sku":"AXL-6-289-81111","price":723.33,"currency_code":"NZD","in_stock":true},{"title":"Red \/ Polished","offer_id":32627216777315,"sku":"AXL-6-289-82110","price":723.33,"currency_code":"NZD","in_stock":true},{"title":"Red \/ Powder Coated Black","offer_id":32627216842851,"sku":"AXL-6-289-82111","price":723.33,"currency_code":"NZD","in_stock":true},{"title":"Blue \/ Polished","offer_id":32627216646243,"sku":"AXL-6-289-83110","price":723.33,"currency_code":"NZD","in_stock":true},{"title":"Blue \/ Powder Coated Black","offer_id":32627216711779,"sku":"AXL-6-289-83111","price":723.33,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Axl-6-289_3.jpg?v=1591072330"},{"product_id":"corksport-mazda-3-2-5l-short-ram-intake","title":"CorkSport 2014+ Mazda 3 - 2.5L Short Ram Intake","description":"Dramatically reduce intake restrictions and get an impressive improvement in power throughout the entire RPM range with the Mazda3 SkyActiv Short Ram Intake. The SRI is a staple part for increasing your Mazda3's performance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGains up to 6 Horsepower\u003c\/strong\u003e\u003cbr\u003eMAF housings engineered to exact tolerances and manufactured using the latest in computer-aided techniques. Machined from 6061-T6 aluminum. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe Corksport Advantage\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned Specifically for Mazda:\u003c\/strong\u003e All CorkSport parts have been designed and tested specifically for Mazdas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVelocity Stack Design:\u003c\/strong\u003e Smooths the incoming airflow and increases the flow rate of air and reduces turbulence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Dry Flow Air Filter:\u003c\/strong\u003e Reusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration, unlike cotton-gauze which holds contaminates until you clean the filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Reinforced Silicone Connectors:\u003c\/strong\u003e Constructed from multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eAdditional Features\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle Fitment: 2014+ Mazda 3 2.5L Hatchback \u0026amp; Sedan\u003c\/li\u003e\n\u003cli\u003eDesigned in America: Designed in Vancouver, Washington, in the Pacific Northwest.\u003c\/li\u003e\n\u003cli\u003eCorkSport Service \u0026amp; Support: Receive a 2-year warranty, full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support at (360)260-2675.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CorkSport","offers":[{"title":"Black","offer_id":32700962275427,"sku":"Axm-6-117-100-BLK","price":460.74,"currency_code":"NZD","in_stock":true},{"title":"Blue","offer_id":32700962144355,"sku":"Axm-6-117-100-BLU","price":460.74,"currency_code":"NZD","in_stock":true},{"title":"Red","offer_id":32700962209891,"sku":"Axm-6-117-100-RED","price":460.74,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/axm-6-117-SkyActiv-SRI_full.jpg?v=1591158992"},{"product_id":"corksport-mazda-3-2-0-skyactiv-power-series-short-ram-intake","title":"CorkSport Mazda 3 (2014-18) 2.0 SkyActiv Power Series Short Ram Intake","description":"\u003cp\u003e\u003cstrong\u003eCorkSport Mazda3 Power Series Short Ram Intake.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you want a simple modification that increases your power, and can improve gas mileage; the CorkSport Mazda3 SRI is for you. With quick installation, this plug and play piece is a great way to start getting more power out of your Mazda 3. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOne of the easiest and most beneficial performance enhancements you can do for your vehicle,\u003cspan\u003e the CorkSport Mazda3 Power Series Short Ram Intake replaces your factory airbox with an open intake system allowing more air into the intake chamber. Engineered with exacting tolerances, the CorkSport SkyActiv SRI includes our precision machined MAF housing made from billet aluminum, a durable dry flow air filter and custom reinforced silicone connector. \u003c\/span\u003eIn initial testing with the 2.0 Liter SkyActiv engine, the Mazda 3 CorkSport Short Ram Intake netted peak gains of +5 HP and +6 lb torque at the wheels.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe CorkSport Advantage:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned Specifically for SkyActiv Gasoline Engines:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCorkSport has developed a Mazda3 power series intake that will perform with the all-new SkyActiv engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid Unwanted Check-Engine Lights:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThe MAF housing is precision machined from billet aluminum to prevent air leaks and inaccurate readings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImprove Power:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eInitial testing showed peak gains of +5 HP and +6 lb torque at the wheels with the 2.0L and 10hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Dry Flow Air Filter:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eReusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Reinforced Silicone Connector:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConstructed from multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorkSport Service and Support:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eReceive a 2-year warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CorkSport","offers":[{"title":"Black","offer_id":32754565513315,"sku":"Axm-6-117-150-BK","price":437.7,"currency_code":"NZD","in_stock":true},{"title":"Blue","offer_id":32754565480547,"sku":"Axm-6-117-150-BL","price":437.7,"currency_code":"NZD","in_stock":true},{"title":"Red","offer_id":32754565546083,"sku":"Axm-6-117-150-RD","price":437.7,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Cx5-short-ram-intake-kit.jpg?v=1591159012"},{"product_id":"corksport-cx-5-skyactiv-power-series-short-ram-intake-2-0l","title":"CorkSport SkyActiv Power Series Short Ram Intake 2.0L - 2013 - 2013+ CX5, 2014+ Mazda3, 2014+ Mazda6, 2016+ CX-3","description":"\u003cb\u003eOne of the easiest and most beneficial performance enhancements you can do for your vehicle,\u003c\/b\u003e the CorkSport Power Series Short Ram Intake replaces your factory airbox with an open intake system allowing more air into the intake chamber. Engineered with exacting tolerances, the CorkSport SkyActiv Short Ram Intake includes our precision machined MAF housing made from billet aluminum, a durable dry flow air filter and custom reinforced silicone connector. \u003cb\u003eIn initial testing with the 2.0 Liter SkyActiv engine, the CorkSport Short Ram Intake netted peak gains of +5 HP and +6 lb torque at the wheels\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe CorkSport Advantage:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned Specifically for SkyActiv Gasoline Engines*:\u003c\/strong\u003e CorkSport has developed a new power series intake that will perform with the all new SkyActiv engines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAvoid Unwanted Check-Engine Lights: \u003c\/b\u003eThe MAF housing is precision machined from billet aluminum to prevent air leaks and innaccurate readings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eImprove Power: \u003c\/b\u003eInitial testing showed peak gains of +5 HP and +6 lb torque at the wheels with the 2.0L and 10hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable Dry Flow Air Filter: \u003c\/b\u003eReusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCustom Reinforced Silicone Connector:\u003c\/b\u003e Constructed from multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCorkSport Service and Support:\u003c\/b\u003e Receive a 2 year warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/hEM7svTEMdY\" width=\"862\" height=\"485\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eMade for gasoline engines only. Will not work on diesel engines. With the CorkSport Intake installed on the SkyActiv engine, at higher RPM's you may hear a slight ticking from the opening and closing of the injectors. This is completely normal and is what helps increase torque and fuel economy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to find your build date of your 2013-2017 Mazda Cx-5.\u003c\/strong\u003e Open the drivers door and locate the vehicle identification sticker. It will look like the picture below. There will be a location which says date shown with the red arrow. That is what you need to find your build date. As you can see the on the example below the Mazda was built in November 2012.\u003c\/p\u003e","brand":"CorkSport","offers":[{"title":"Black","offer_id":32700975710307,"sku":"Cx5-6-117-BLK","price":437.7,"currency_code":"NZD","in_stock":true},{"title":"Blue","offer_id":32700975677539,"sku":"Cx5-6-117-BLU","price":437.7,"currency_code":"NZD","in_stock":true},{"title":"Red","offer_id":32700975743075,"sku":"Cx5-6-117-RED","price":437.7,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Mazda-3-intake-2-liter_1.jpg?v=1591159404"},{"product_id":"corksport-mazda-cx5-skyactiv-power-series-short-ram-intake-2-5-engine-2013-2016","title":"CorkSport 2013-2016 Mazda CX5 SkyActiv Power Series Short Ram Intake 2.5 Engine","description":"\u003cp\u003e\u003cstrong\u003eDramatically reduce intake restrictions and get an impressive improvement in power throughout the entire RPM range with the Mazda SkyActiv Short Ram Intake System.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGains up to 6 Horsepower\u003c\/strong\u003e MAF housings engineered to exact tolerances and manufactured using the latest in computer-aided techniques. Machined from 6061-T6 aluminum.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/corksport.com\/images\/product\/15\/thecorksportadvantage.jpg\" class=\"cp-lazy\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned Specifically for Mazda:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAll CorkSport parts have been designed and tested specifically for Mazdas.\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eVelocity Stack Design:\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e Smooths the incoming airflow and increases the flow rate of air and reduces turbulence.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Dry Flow Air Filter:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eReusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration, unlike cotton-gauze which holds contaminates until you clean the filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Reinforced Silicone Connectors:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConstructed from multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorkSport Service and Support:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eReceive a 2-year warranty, full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to find your build date of your 2013+ Mazda Cx5.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOpen the drivers' door and locate the vehicle identification sticker. It will look like the picture below. There will be a location which says date shown by the red arrow. That is what you need to find your build date. As you can see in the example below the Mazda was built in November 2012.\u003c\/p\u003e","brand":"CorkSport","offers":[{"title":"Black","offer_id":32700979871843,"sku":"Cx5-6-117-10-BLK","price":460.74,"currency_code":"NZD","in_stock":true},{"title":"Blue","offer_id":32700979839075,"sku":"Cx5-6-117-10-BLU","price":460.74,"currency_code":"NZD","in_stock":true},{"title":"Red","offer_id":32700979904611,"sku":"Cx5-6-117-10-RED","price":460.74,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/32982_axm-6-117-SkyActiv-SRI_full.jpg?v=1591159408"},{"product_id":"corksport-mazda-2-short-ram-intake","title":"CorkSport Mazda 2 Short Ram Intake","description":"\u003cp\u003e\u003cb\u003eGive your 2011+ Mazda2 immediate boosts in horsepower and torque\u003c\/b\u003e\u003cspan\u003e by bringing more air into the intake chamber. Our simple to install SRI is MAF housing precision machined from billet aluminum. Designed to maintain optimal flow and generate ideal performance, Corksport engineers each part with exacting tolerances and uses the latest in computer aided manufacturing techniques to make sure you get the highest quality, best performing part for your money. With the CorkSport Intake System installed the 2011 Mazda 2 showed an increase of 7ft lbs of torque and 5hp at the wheels over the stock intake. Works on manual and automatic transmission models.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eThe CorkSport Advantage\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePrevent air leaks and inaccurate readings\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003ethat can cause check-engine lights: The MAF sensor is secured to the housing using T304 stainless fasteners for a rock solid connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable Dry Flow Air Filter:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eReusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCustom reinforced silicone connector\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003econstructed with multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStainless steel T-bolt clamps\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eensure an airtight seal which prevents unmetered airflow\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCorksport Service and Support:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eReceive full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CorkSport","offers":[{"title":"Black","offer_id":32635391541347,"sku":"Mz2-6-117-31100","price":425.48,"currency_code":"NZD","in_stock":true},{"title":"Blue","offer_id":32635391574115,"sku":"Mz2-6-117-33100","price":425.48,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Mz2-6-117.jpg?v=1591246254"},{"product_id":"corksport-2016-2018-mazda-miata-mx-5-cold-air-intake-system","title":"CorkSport 2016-2018 Mazda Miata Mx-5 Cold Air Intake System","description":"\u003cp\u003eHelp your ND Miata MX5 breathe easy with the\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eCorkSport Cold Air Intake System.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThe CorkSport Miata MX-5 CAI (Cold Air Intake) features a CAD designed ABS box and lid, billet aluminum MAF housing and an AEM high-flow dry air filter drawing air from the OEM cold air ducting to provide you with all the cool ambient air the 2.0L needs.\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCheck out the installation instructions below. Share your performance review with the CorkSport community once installed!\u003c\/p\u003e\n\u003ch2\u003eThe CorkSport Advantage\u003c\/h2\u003e\n\u003cdiv class=\"product_body\"\u003e\n\u003ch3\u003ePerformance:\u003c\/h3\u003e\n\u003cp\u003eThe CorkSport CAI combines the OEM cold air ducting with a high flow intake system for the best of both worlds.\u003c\/p\u003e\n\u003cdiv class=\"product_body\"\u003e\n\u003ch3\u003eOEM Fitment:\u003c\/h3\u003e\n\u003cp\u003eThe CAI box and lid is CAD designed for a precise fit in your engine bay. The CorkSport CAI also utilizes the OEM rubber isolators for mounting, so installation is a breeze.\u003c\/p\u003e\n\u003cdiv class=\"product_body\"\u003e\n\u003ch3\u003eLaminar Flow:\u003c\/h3\u003e\n\u003cp\u003eAbrupt edges in the airflow can cause excessive turbulence which reduces total flow. The billet aluminum MAF housing, high-flow air filter and 4-layer silicone coupler are designed to work together seamlessly to provide smooth laminar flow.\u003c\/p\u003e\n\u003ch2\u003eAdditional Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2016-2018 Mazda MX-5 Miata, all ND1 models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamp Option:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eChoose from polished stainless steel or black zinc coated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned \u0026amp; Developed in America:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCorkSport Mazda Performance is resides in Vancouver, Washington and is located in the beautiful Pacific Northwest.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorkSport Service \u0026amp; Support:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2 year limited warranty, full color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"CorkSport","offers":[{"title":"Default Title","offer_id":32692259848291,"sku":"NDM-6-115-10","price":638.23,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/NDM-6-115-10.jpg?v=1591246429"},{"product_id":"prl-motorsports-2017-honda-cr-v-1-5t-short-ram-air-intake-system","title":"PRL Short Ram Air Intake System - Honda CR-V 2017+ 1.5T","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFITS 2017+ HONDA CR-V 1.5T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePlease Read Before Ordering:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eNO TUNE REQUIRED FOR STREET MAF HOUSING\u003c\/li\u003e\n\u003cli\u003eRACE MAF-SPECIFIC TUNE REQUIRED FOR RACE MAF HOUSING\u003c\/li\u003e\n\u003cli\u003eHONDATA \u0026amp; KTUNER BOTH OFFER RACE MAF BASEMAP CALIBRATIONS\u003c\/li\u003e\n\u003cli\u003eTWO STEP PERFORMANCE \"TSP\" TUNE ALSO COMPATIBLE BY SELECTING \"RACE MAF\" OPTION\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur CNC machined billet aluminum MAF Housing was designed to provide *factory-spec fuel trims (-4% of factory STFT \u0026amp; LTFT) for optimal drivability and performance. This SRI utilizes a 4\" air filter and is available with two different MAF housing choices; a Street housing and a Race housing. Both housings utilizes the factory MAF sensor, but feature two different diameters and profiles. As mentioned above, the Street housing is designed to provide factory-spec fuel trims WITHOUT any tuning whatsoever. The Race housing allows a 50% larger volume of air in comparison to the Street housing, which is why a tune IS required. This larger volume of airflow reduces pumping loss and creates an unrestricted air path to feed the MAF housing with ambient temperature air.\u003c\/p\u003e\n\u003cp\u003eCustomers can switch between MAF housings without having to buy another intake system by purchasing our \u003ca href=\"https:\/\/prlmotorsports.com\/civicxshortramtocoldair.aspx\"\u003eMAF Housing Conversion Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003ePerformance Gains:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e15 horsepower and 12 ft\/lb torque gains in comparison to stock with Street MAF housing WITHOUT TUNE\u003c\/li\u003e\n\u003cli\u003e20 horsepower and 15 ft\/lb torque gains in comparison to stock with Race MAF housing WITH Race MAF basemap calibration on Hondata and\/or KTuner\u003c\/li\u003e\n\u003cli\u003eLarger gains to be seen at higher power levels with custom tuning\u003c\/li\u003e\n\u003c\/ul\u003e\nPlease note that short ram intakes are extremely sensitive to heat-soak with this chassis (which is why we recommend our CAI). Performance gains will lessen as the engine and intake begins to heat-soak.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e","brand":"PRL Motorsports","offers":[{"title":"Street","offer_id":32646708822115,"sku":"PRL-HCRV5-INT-SRI-B","price":716.21,"currency_code":"NZD","in_stock":true},{"title":"Race","offer_id":32646708854883,"sku":"PRL-HCRV5-INT-SRI-D","price":781.51,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/10thGenSRI.1.jpg?v=1591418431"},{"product_id":"prl-motorsports-2018-accord-2-0t-silicone-intake-hose-kit","title":"PRL Silicone Intake Hose Kit - Honda Accord 2.0T 2018+","description":"\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFITS ALL 2018+ HONDA ACCORD 2.0T MODELS INCLUDING 6MT, CVT, RHD, INTERNATIONAL MODELS, ETC\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003ePlease Read Before Ordering:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO TUNING REQUIRED\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eTechnical Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PRL Motorsports Stage 1 Intake System offers great gains at an affordable price. This kit replaces the corrugated factory inlet hose with our better looking, smoother flowing 4-ply silicone hose and high flow air filter. The pleats found in the factory hose makes disrupts air flow, which limits power potential and throttle response.\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 4-Ply Silicone Intake Hose Kit\u003c\/li\u003e\n\u003cli\u003e(1) Billet Evap Flange\u003c\/li\u003e\n\u003cli\u003e(4) 304 Stainless Steel Worm Clamp\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRL Motorsports","offers":[{"title":"Default Title","offer_id":32648418164835,"sku":"PRL-HA10-20T-INT-HOSE","price":227.35,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Accord2.0TStage1IntakeBlackIntakeHose.jpg?v=1591418875"},{"product_id":"2018-accord-1-5t-stage-1-intake-system","title":"PRL Stage 1 Intake System - Honda Accord 1.5T 2018+","description":"\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003cbr\u003eFits All 2018+ Honda Accord 1.5T Models Including 6Mt, Cvt, Rhd, International Models, Etc.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePlease Read Before Ordering:\u003c\/strong\u003e\u003cbr\u003eNo Tuning Required\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTechnical Notes:\u003c\/strong\u003e\u003cbr\u003eThis kit replaces the corrugated factory inlet hose with our better looking, smoother flowing 4-ply silicone hose. The pleats found in the factory hose makes disrupts air flow, which limits power potential and throttle response.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 4-ply Silicone Hose\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(3) Stainless Hose Clamp\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) Billet Evap Flange\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) Stainless Bracket\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) M6 x 1.00mm x 12mm Bolt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis kit uses the factory rubber grommet. If you do not use this spacer, the PRL bracket will not reach the tab on the factory bracket. Properly attaching this bracket ensures the silicone tube will not be touching the factory bracket closest to the front of the vehicle.\u003c\/p\u003e","brand":"PRL Motorsports","offers":[{"title":"Default Title","offer_id":32648439332963,"sku":"PRL-HA10-15T-INT-S1","price":386.52,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Accord1.5TStage1IntakeSystemAnodizedBung.jpg?v=1591418942"},{"product_id":"prl-motorsports-2018-accord-2-0t-stage-1-intake-system","title":"PRL Stage 1 Intake System - Honda Accord 2.0T 2018+","description":"\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFITS ALL 2018+ HONDA ACCORD 2.0T MODELS INCLUDING 6MT, CVT, RHD, INTERNATIONAL MODELS, ETC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Read Before Ordering:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO TUNING REQUIRED\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eTechnical Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PRL Motorsports Stage 1 Intake System offers great gains at an affordable price. This kit replaces the corrugated factory inlet hose with our better looking, smoother flowing 4-ply silicone hose and high flow air filter. The pleats found in the factory hose makes disrupts air flow, which limits power potential and throttle response.\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1)\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/prlmotorsports.com\/20TAccordHighFlowDrop-InAirFilter.aspx\"\u003eHigh Flow Drop-In Oiled Panel Air Filter\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1)\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/prlmotorsports.com\/20TAccordSiliconeIntakeHoseKit.aspx\"\u003e4-Ply Silicone Intake Hose Kit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003ePerformance Gains:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased turbocharger spool\u003c\/li\u003e\n\u003cli\u003e16+ horsepower at peak\u003c\/li\u003e\n\u003cli\u003e18+ ft\/lb torque throughout the mid-range\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRL Motorsports","offers":[{"title":"Default Title","offer_id":32648445657187,"sku":"PRL-HA10-20T-INT-S1","price":341.04,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Accord2.0TStage1IntakeAssembledwithBlackAnodizedEvapbung.jpg?v=1591418947"},{"product_id":"2017-civic-type-r-fk8-stage-1-intake-system","title":"PRL Stage 1 Intake System - Civic Type-R FK8 2017+","description":"\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003cbr\u003eFits All 2017+ Honda Civic Type-R Models Including 6Mt, Cvt, Rhd, International Models, Etc.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePlease Read Before Ordering:\u003c\/strong\u003e\u003cbr\u003eNo Tuning Required\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTechnical Notes:\u003c\/strong\u003e\u003cbr\u003eThe PRL Motorsports Stage 1 Intake System offers great gains at an affordable price. This kit replaces the corrugated factory inlet hose with our better looking, smoother flowing 4-ply silicone hose and high flow air filter. The pleats found in the factory hose makes disrupts air flow, which limits power potential and throttle response.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e(1) High Flow Drop-In Oiled Panel Air Filter\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) 4-Ply Silicone Intake Hose Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePerformance Gains:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e6+ horsepower \u0026amp; 5 ft\/lb torque throughout the power-band\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRL Motorsports","offers":[{"title":"Default Title","offer_id":32648539865187,"sku":"PRL-HCR-INT-S1","price":329.67,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/CTRStage1AnodizedBung.jpg?v=1591418997"},{"product_id":"2017-honda-civic-si-1-5t-cobra-cold-air-intake-system","title":"PRL 2017+ Honda Civic Si 1.5T Cobra Cold Air Intake System","description":"\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2017+ Honda Civic Si – For Non-Si Applications, Please View Our Other Listing(S)\u003c\/li\u003e\n\u003cli\u003eFits Honda Sensing Package\u003c\/li\u003e\n\u003cli\u003eCanadian Models Require Usdm Windshield Washer Reservoir Conversion Kit\u003c\/li\u003e\n\u003cli\u003eNot Compatible With Factory Cvt Cooler (Spain, Turkey, Etc)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePlease Read Before Ordering:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eNo Tune Required For Street Maf Housing\u003c\/li\u003e\n\u003cli\u003eRace Maf-Specific Tune Required For Race Maf Housing\u003c\/li\u003e\n\u003cli\u003eHondata \u0026amp; Ktuner Both Offer Race Maf Basemap Calibrations\u003c\/li\u003e\n\u003cli\u003eTwo Step Performance \"Tsp\" Tune Also Compatible By Selecting \"Race Maf\" Option\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eTechnical Notes:\u003c\/strong\u003e\u003cbr\u003eThere’s a reason our Cobra Cold Air Intake Systems is a constant topic of discussion and so highly regarded. Our CNC machined billet aluminum MAF Housing was designed to provide *factory-spec fuel trims (-4% of factory STFT \u0026amp; LTFT) for optimal drivability and performance. The Cobra CAI utilizes a 4\" volume from the air filter into the MAF Housing and is available with two different MAF housing choices; a Street housing and a Race housing. Both housings utilizes the factory MAF sensor, but feature two different diameters and profiles. As mentioned above, the Street housing is designed to provide factory-spec fuel trims WITHOUT any tuning whatsoever. The Race housing allows a 50% larger volume of air in comparison to the Street housing, which is why a tune IS required. This larger volume of airflow reduces pumping loss and creates an unrestricted air path to feed the MAF housing with ambient temperature air.\u003cbr\u003e\u003cbr\u003eCustomers can switch between MAF housings without having to buy another intake system by purchasing our MAF Housing Conversion Kit\u003cbr\u003e\u003cbr\u003eCustomers can convert to a Short Ram Intake with our Short Ram Intake Conversion Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance Gains:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e15 horsepower and 12 ft\/lb torque gains in comparison to stock with Street MAF housing WITHOUT TUNE - Read More Here!\u003c\/li\u003e\n\u003cli\u003e20 horsepower and 15 ft\/lb torque gains in comparison to stock with Race MAF housing WITH Race MAF basemap calibration on Hondata and\/or KTuner – Read More Here!\u003c\/li\u003e\n\u003cli\u003eLarger gains to be seen at higher power levels with custom tuning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eThird Party Testing:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eHondata\u003c\/li\u003e\n\u003cli\u003eInnovative MotorWorks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eBillet Aluminum MAF Housing (Anodized Black)\u003c\/li\u003e\n\u003cli\u003ePRL Motorsports High Flow Oiled Cone Air Filter\u003c\/li\u003e\n\u003cli\u003e(1) 4-Ply Upper Silicone Intake Hose (Race or Street)\u003c\/li\u003e\n\u003cli\u003e(1) 6-Ply Lower Silicone Intake Hose\u003c\/li\u003e\n\u003cli\u003eHDPE Rotomolded Lower Intake Tube\u003c\/li\u003e\n\u003cli\u003e(4) 304 Stainless Steel Worm Clamps\u003c\/li\u003e\n\u003cli\u003eStainless Steel Mounting Brackets\u003c\/li\u003e\n\u003cli\u003eStainless Steel Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\nAbove is a graph of the long term fuel trims with the stock intake w\/ air box and factory ECU mapping, or in other words a bone-stock car.\u003cbr\u003e\u003cbr\u003eHere is a graph of the long term fuel trims again with, but with our cold air intake (Street MAF) and factory ECU mapping.\u003cbr\u003e\u003cbr\u003eThis is another long term fuel trim graph, but with our cold air intake (Street MAF) and +6psi Hondata off-the-shelf map.\u003cbr\u003e\u003cbr\u003eNotice how consistent and similar all of the LTFT graphs are. Each graph is within -4 LTFT.\u003cbr\u003e\u003cbr\u003eAbove is a graph of the short term fuel trims with stock intake w\/ air box and factory ECU mapping (stock car).\u003cbr\u003e\u003cbr\u003eHere is a short term fuel trim graph with our cold air intake (Street MAF) and factory ECU mapping.\u003cbr\u003e\u003cbr\u003eThis is another graph of the short term fuel trims with our cold air intake (Street MAF) and +6psi Hondata off-the-shelf map.\u003cbr\u003e\u003cbr\u003eAll of the STFT graphs display identical curves and consistency.","brand":"PRL Motorsports","offers":[{"title":"Street","offer_id":32652437061731,"sku":"PRL-HC10-INT-CAI-B","price":954.96,"currency_code":"NZD","in_stock":true},{"title":"Race","offer_id":32652437094499,"sku":"PRL-HC10-INT-CAI-D","price":954.96,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/RaceMafIntakeAssembled.jpg?v=1591504200"},{"product_id":"prl-2016-honda-civic-non-si-1-5t-short-ram-air-intake-system","title":"PRL 2016+ Honda Civic Non-Si 1.5T Short Ram Air Intake System","description":"\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFITS 2016+ HONDA CIVIC NON-SI – FOR SI APPLICATIONS\u003c\/span\u003e, \u003ca href=\"https:\/\/prlmotorsports.com\/civicxshortramintakeSi.aspx\"\u003ePLEASE VIEW OUR OTHER LISTING(S)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Read Before Ordering:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNO TUNE REQUIRED FOR STREET MAF HOUSING\u003c\/li\u003e\n\u003cli\u003eRACE MAF-SPECIFIC TUNE REQUIRED FOR RACE MAF HOUSING\u003c\/li\u003e\n\u003cli\u003eHONDATA \u0026amp; KTUNER BOTH OFFER RACE MAF BASEMAP CALIBRATIONS\u003c\/li\u003e\n\u003cli\u003eTWO STEP PERFORMANCE \"TSP\" TUNE ALSO COMPATIBLE BY SELECTING \"RACE MAF\" OPTION\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003eTechnical Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf we could recommend an intake system for the 1.5L Turbo Civic Platform it would our \u003ca href=\"https:\/\/prlmotorsports.com\/civicxcoldairintake.aspx\"\u003eCobra Cold Air Intake System\u003c\/a\u003e. However, for customers that do not wish to run a CAI, our Short Ram Intake System is also an option. Our CNC machined billet aluminum MAF Housing was designed to provide *factory-spec fuel trims (-4% of factory STFT \u0026amp; LTFT) for optimal drivability and performance. This SRI utilizes a 4\" air filter and is available with two different MAF housing choices; a Street housing and a Race housing. Both housings utilizes the factory MAF sensor, but feature two different diameters and profiles. As mentioned above, the Street housing is designed to provide factory-spec fuel trims WITHOUT any tuning whatsoever. The Race housing allows a 50% larger volume of air in comparison to the Street housing, which is why a tune IS required. This larger volume of airflow reduces pumping loss and creates an unrestricted air path to feed the MAF housing with ambient temperature air.\u003c\/p\u003e\n\u003cp\u003eCustomers can switch between MAF housings without having to buy another intake system by purchasing our \u003ca href=\"https:\/\/prlmotorsports.com\/civicxshortramtocoldair.aspx\"\u003eMAF Housing\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003eCustomers can convert to a Cold Air Intake with our \u003ca href=\"https:\/\/prlmotorsports.com\/civicxshortramtocoldair.aspx\"\u003eCold Air Intake Conversion Kit\u003c\/a\u003e\u003ca href=\"https:\/\/prlmotorsports.com\/civicxcoldairtoshortram-1-1-1.aspx\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003ePerformance Gains:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e15 horsepower and 12 ft\/lb torque gains in comparison to stock with Street MAF housing WITHOUT TUNE\u003c\/li\u003e\n\u003cli\u003e20 horsepower and 15 ft\/lb torque gains in comparison to stock with Race MAF housing WITH Race MAF basemap calibration on Hondata and\/or KTuner\u003c\/li\u003e\n\u003cli\u003eLarger gains to be seen at higher power levels with custom tuning\u003c\/li\u003e\n\u003c\/ul\u003e\nPlease note that short ram intakes are extremely sensitive to heat-soak with this chassis (which is why we recommend our CAI). Performance gains will lessen as the engine and intake begins to heat-soak.\u003c\/div\u003e","brand":"PRL Motorsports","offers":[{"title":"Street","offer_id":32652669485155,"sku":"PRL-HC10-INT-SRI-A","price":716.21,"currency_code":"NZD","in_stock":true},{"title":"Race","offer_id":32652669550691,"sku":"PRL-HC10-INT-SRI-C","price":716.21,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/10thGenSRIalt1.2.jpg?v=1591504358"},{"product_id":"prl-2016-honda-civic-1-5t-cold-air-intake-hardware-kit","title":"PRL 2016+ Honda Civic 1.5T Cold Air Intake Hardware Kit","description":"\u003cspan\u003eReplacement Hardware for our Cobra Cold Air Intake system.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDoes not include Cobra Mounting Brackets\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIncludes\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eM6 Nylock Nut\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e(2) M6 Bolts for CL Relocation\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSHCS for CL Relocation\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePRL Clutch Line Relocation Bracket\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e(6) M6 Bolts for Cobra Mounting Brackets\u003c\/span\u003e","brand":"PRL Motorsports","offers":[{"title":"Default Title","offer_id":32652677120099,"sku":"PRL-HC10-INT-CAI-HW","price":50.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/CAIHardwareKit.jpg?v=1591504385"},{"product_id":"prl-2016-honda-civic-1-5t-short-ram-intake-to-cold-air-conversion-kit","title":"PRL 2016+ Honda Civic 1.5T Short Ram Intake to Cold Air Conversion Kit","description":"\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eFITS ALL 2016+ 1.5T HONDA CIVIC MODELS INCLUDING SI, NON-SI, 6MT, CVT, RHD, INTERNATIONAL MODELS, ETC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKit Includes everything needed to convert the PRL Motorsports Short Ram Intake System into a Cobra Cold Air Intake.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cspan\u003eKit Includes:\u003c\/span\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e(1) HDPE Rotomolded Lower Intake Tube\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(1) 4-Ply Silicone Hose\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(2) CAI Bracket\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Tahoma\"\u003e(2) 304 Stainless Steel Worm Gear Clamps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Tahoma\"\u003e(1) Hardware Bag w\/ Billet Clutch Line Relocation Bracket\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e**Filter not included, shown in assembly picture for representation only\u003c\/div\u003e","brand":"PRL Motorsports","offers":[{"title":"Default Title","offer_id":32652762775651,"sku":"PRL-HC10-INT-CON-A","price":318.31,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/SRItoCAIConversion.2.jpg?v=1591504390"},{"product_id":"prl-2016-honda-civic-1-5t-cold-air-intake-to-short-ram-conversion-kit","title":"PRL 2016+ Honda Civic 1.5T Cold Air Intake to Short Ram Conversion Kit","description":"\u003cdiv\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eFITS ALL 2016+ 1.5T HONDA CIVIC MODELS INCLUDING SI, NON-SI, 6MT, CVT, RHD, INTERNATIONAL MODELS, ETC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eTechnical Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKit Includes everything needed to convert the PRL Motorsports Cobra Cold Air Intake System into a Short Ram Intake.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cspan\u003eKit Includes:\u003c\/span\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e(1) SRI Bracket\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(1) M8 x 1.25mm Rubber Insulator\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(2) M6 x 1.00 x 1.25mm Flange Bolt\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(1) M8 x 1.25mm Serrated Nut\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"PRL Motorsports","offers":[{"title":"Default Title","offer_id":32652769722467,"sku":"PRL-HC10-INT-CON-B","price":65.92,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/CAItoSRIConversion.jpg?v=1591504401"},{"product_id":"prl-2016-honda-civic-1-5t-maf-housing-conversion-kit","title":"PRL 2016+ Honda Civic 1.5T MAF Housing Conversion Kit","description":"\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eFITS ALL 2016+ 1.5T HONDA CIVIC \u0026amp; 2017+ CR-V MODELS INCLUDING SI, NON-SI, 6MT, CVT, RHD, INTERNATIONAL MODELS, ETC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKit Includes everything needed to convert to Street or Race MAF housing with PRL Motorsports Cobra Cold Air and Short Ram Intake Systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cspan\u003eKit Includes:\u003c\/span\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e(1) Billet Aluminum MAF Housing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(1) 4-Ply Silicone Hose\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(1) 304 Stainless Steel Worm Clamp\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"PRL Motorsports","offers":[{"title":"Non-Si Street","offer_id":32652816941155,"sku":"PRL-HC10-INT-MAF-A","price":591.16,"currency_code":"NZD","in_stock":true},{"title":"Si \u0026 CR-V Street","offer_id":32652816973923,"sku":"PRL-HC10-INT-MAF-B","price":591.16,"currency_code":"NZD","in_stock":true},{"title":"Non-Si Race","offer_id":32652817006691,"sku":"PRL-HC10-INT-MAF-C","price":591.16,"currency_code":"NZD","in_stock":true},{"title":"Si \u0026 CR-V Race","offer_id":32652817039459,"sku":"PRL-HC10-INT-MAF-D","price":591.16,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/RaceMAFConversionSeparateNoLogo.jpg?v=1591504421"},{"product_id":"prl-2016-honda-civic-1-5t-stage-1-intake-system","title":"PRL 2016+ Honda Civic 1.5T Stage 1 Intake System","description":"\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFITS ALL 2016+ 1.5T HONDA CIVIC MODELS INCLUDING SI, NON-SI, 6MT, CVT, RHD, INTERNATIONAL MODELS, ETC\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003ePlease Read Before Ordering:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO TUNING REQUIRED\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eTechnical Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PRL Motorsports Stage 1 Intake System offers great gains at an affordable price. This kit replaces the corrugated factory inlet hose with our better looking, smoother flowing 4-ply silicone hose and high flow air filter. The pleats found in the factory hose makes disrupts air flow, which limits power potential and throttle response.\u003c\/p\u003e\n\u003cdiv class=\"LongDescription\"\u003e\n\u003cstrong\u003ePerformance Gains:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e7+ horsepower throughout the power-band\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Reviews\"\u003e\n\u003ca name=\"reviews\"\u003e\u003c\/a\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/div\u003e","brand":"PRL Motorsports","offers":[{"title":"Black","offer_id":32652835553379,"sku":"PRL-HC10-INT-S1-BLK","price":215.98,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/BlackStage1IntakeKit.jpg?v=1591504431"},{"product_id":"prl-2017-honda-civic-si-1-5t-short-ram-air-intake-system","title":"PRL 2017+ Honda Civic Si 1.5T Short Ram Air Intake System","description":"\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFITS 2017+ HONDA CIVIC SI – FOR NON-SI APPLICATIONS, \u003ca href=\"https:\/\/prlmotorsports.com\/civicxshortramintakeNonSi.aspx\"\u003ePLEASE VIEW OUR OTHER LISTING(S)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePlease Read Before Ordering:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eNO TUNE REQUIRED FOR STREET MAF HOUSING\u003c\/li\u003e\n\u003cli\u003eRACE MAF-SPECIFIC TUNE REQUIRED FOR RACE MAF HOUSING\u003c\/li\u003e\n\u003cli\u003eHONDATA \u0026amp; KTUNER BOTH OFFER RACE MAF BASEMAP CALIBRATIONS\u003c\/li\u003e\n\u003cli\u003eTWO STEP PERFORMANCE \"TSP\" TUNE ALSO COMPATIBLE BY SELECTING \"RACE MAF\" OPTION\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf we could recommend an intake system for the 1.5L Turbo Civic Platform it would our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/prlmotorsports.com\/civicxcoldairintake.aspx\"\u003eCobra Cold Air Intake System\u003c\/a\u003e. However, for customers that do not wish to run a CAI, our Short Ram Intake System is also an option. Our CNC machined billet aluminum MAF Housing was designed to provide *factory-spec fuel trims (-4% of factory STFT \u0026amp; LTFT) for optimal drivability and performance. This SRI utilizes a 4\" air filter and is available with two different MAF housing choices; a Street housing and a Race housing. Both housings utilizes the factory MAF sensor, but feature two different diameters and profiles. As mentioned above, the Street housing is designed to provide factory-spec fuel trims WITHOUT any tuning whatsoever. The Race housing allows a 50% larger volume of air in comparison to the Street housing, which is why a tune IS required. This larger volume of airflow reduces pumping loss and creates an unrestricted air path to feed the MAF housing with ambient temperature air.\u003c\/p\u003e\n\u003cp\u003eCustomers can switch between MAF housings without having to buy another intake system by purchasing our \u003ca href=\"https:\/\/prlmotorsports.com\/civicxshortramtocoldair.aspx\"\u003eMAF Housing Conversion Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCustomers can convert to a Cold Air Intake with our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/prlmotorsports.com\/civicxshortramtocoldair.aspx\"\u003eCold Air Intake Conversion Kit\u003c\/a\u003e\u003ca href=\"https:\/\/prlmotorsports.com\/civicxcoldairtoshortram-1-1-1.aspx\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003ePerformance Gains:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e15 horsepower and 12 ft\/lb torque gains in comparison to stock with Street MAF housing WITHOUT TUNE\u003c\/li\u003e\n\u003cli\u003e20 horsepower and 15 ft\/lb torque gains in comparison to stock with Race MAF housing WITH Race MAF basemap calibration on Hondata and\/or KTuner\u003c\/li\u003e\n\u003cli\u003eLarger gains to be seen at higher power levels with custom tuning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003ePlease note that short ram intakes are extremely sensitive to heat-soak with this chassis (which is why we recommend our CAI). Performance gains will lessen as the engine and intake begins to heat-soak\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAbove is a graph of the long term fuel trims with the stock intake w\/ air box and factory ECU mapping, or in other words a bone-stock car.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHere is a graph of the long term fuel trims again with, but with our cold air intake (Street MAF) and factory ECU mapping.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is another long term fuel trim graph, but with our cold air intake (Street MAF) and +6psi Hondata off-the-shelf map.Notice how consistent and similar all of the LTFT graphs are. Each graph is within -4 LTFT.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAbove is a graph of the short term fuel trims with stock intake w\/ air box and factory ECU mapping (stock car).Here is a short term fuel trim graph with our cold air intake (Street MAF) and factory ECU mapping.\u003cbr\u003eThis is another graph of the short term fuel trims with our cold air intake (Street MAF) and +6psi Hondata off-the-shelf map.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PRL Motorsports","offers":[{"title":"Street","offer_id":32652871565411,"sku":"PRL-HC10-INT-SRI-B","price":716.21,"currency_code":"NZD","in_stock":true},{"title":"Race","offer_id":32652871598179,"sku":"PRL-HC10-INT-SRI-D","price":716.21,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/10thGenSRI.3.jpg?v=1591504452"},{"product_id":"injen-short-ram-intake-fd-civic-w-r18-1-8l","title":"Injen Short Ram Intake - FD Civic w' R18 (1.8L)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eIs your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you?ve been craving. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system, something no other manufacturer can claim. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. \u003c\/span\u003e\u003c\/p\u003e","brand":"Injen","offers":[{"title":"Black","offer_id":32726688530531,"sku":"injSP1570BLK","price":612.27,"currency_code":"NZD","in_stock":true},{"title":"Polished","offer_id":32726688497763,"sku":"injSP1570P","price":612.27,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/19693f0d6210c3eef06c90495cbea03d.jpg?v=1592973165"},{"product_id":"injen-cold-air-intake-fd-civic-w-r18-1-8l","title":"Injen Cold Air Intake - FD Civic w' R18 (1.8L)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eIs your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe SP series of cold air intakes is Injen's flagship system in its lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system, something no other manufacturer can claim.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe SP series of cold air intakes feature many of Injen Technology's patented tuning processes, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket.\u003c\/span\u003e\u003c\/p\u003e","brand":"Injen","offers":[{"title":"Black","offer_id":32726704586851,"sku":"injSP1569BLK","price":807.59,"currency_code":"NZD","in_stock":true},{"title":"Polished","offer_id":32726704554083,"sku":"injSP1569P","price":807.59,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/fe351e6c22de2f52ed50ecc3d3d77481.jpg?v=1592973174"},{"product_id":"plm-cold-air-intake-system-toyota-gt86","title":"PLM Cold Air Intake System - Toyota GT86","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eCold Air Intake System Fits 2013+ FRS BRZ FT86\u003c\/span\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eSUBARU BRZ 2013+\u003c\/span\u003e\u003c\/div\u003e\n\u003cspan\u003eSCION FRS FR-S \/ TOYOTA GT86 2013+\u003cbr\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eComes with strong light weight air box\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eIncrease HP with more air flow\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDirect bolt on without modifications\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003eInduction box\u003c\/li\u003e\n\u003cli\u003eAir filter\u003c\/li\u003e\n\u003cli\u003eIntake tube\u003c\/li\u003e\n\u003cli\u003eSilicone Coupler\u003c\/li\u003e\n\u003cli\u003eClamps\u003c\/li\u003e\n\u003cli\u003eHigh flow air filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"PLM","offers":[{"title":"Default Title","offer_id":32916798734435,"sku":"PLM-IT-FT","price":910.02,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/files\/PLM-IT-FT-2T_600x_be36b70e-daa7-4ce2-be25-ee88bfc51823.jpg?v=1683009989"},{"product_id":"atpturbo-3-0-modular-intake-kit-vw-golf-jetta-gti-audi-a3-2-0tfsi-turbo","title":"ATP Turbo 3.0\" Modular Intake Kit VW Golf\/Jetta\/GTI\/Audi A3 2.0TFSI Turbo","description":"\u003cdiv class=\"product_display \"\u003e\n\u003cp\u003e3.0” modular intake kit fits FWD 2.0L FSI equipped VW Golf\/Jetta\/GTI\/Audi A3, 304 stainless tubing mandrel bent and electro-polished. 3.0” special CNC machined MAF housing with extensive flow optimization. Billet MAF mounting base and stainless bolts. This system is the only one available for the 2.0L FSI that has been engineerd to use a full 3.0” flow path (for max HP and torque) and will still work properly with any “chipped” or “reflashed” ECU on the vehicle. The kit also utilizes a strategically placed open element filter that is both high flowing and efficient in capturing cold air from the stock air ducting. The kit also comes with a aftermarket diverter valve reroute port for seamless future install of a stronger and more efficient aftermarket diverter valve using this mounting kit sold separately:\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.atpturbo.com\/Merchant2\/merchant.mvc?Screen=PROD\u0026amp;Store_Code=tp\u0026amp;Product_Code=ATP-VVW-173\u0026amp;Category_Code=BCS\"\u003eATP-VVW-173\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e. This mod should be an add-on to any “reflashed’ vehicle that has also been enhanced with an upgraded downpipe. This intake kit will unleash the 2.0FSI engines breathing ability even further and allows the engine to make power to redline without choking up. It replaces the entire stock intake elbow, filter, and airbox assembly including the stock restrictive MAF housing. It’s incredibly easy to install and all parts are supplied. It is also 100% compatible with our upcoming Garrett based turbo upgrade kit and components which are designed to support airflow requirements in excess of 450HP.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAdditional Application Notes:\u003cbr\u003e\u003c\/p\u003e\nInhale is as important as exhale!\u003cbr\u003eIt is very important to understand that the air inlet tract of the turbo system is as important, if not even more important than the exhaust side of the turbo (which most people pay dear attention to when upping the power on the engine). Just like a free flowing exhaust tract that allows the engine to make more power from freeing up exhaust to flow freely out of the exhaust wheel, the compressor wheel can benefit equally as much when flow impediments are removed on the inlet side. The restrictive (small diameter plastic) stock inlet elbow and airbox design are both major impedents for air inlet flow on the 2.0T FSI engine. Net result is a choking effect on the engine, especially during higher duty on the turbo (where boost is raised via a chip) and high engine RPM. When it comes to inlet flow, the more the better. In fact, the turbo operates best and flows the most (makes the most power) with zero inlet ducting. Many \"intake\" kits on the market focus purely on the last piece of the puzzle, often an inlet pipe that connects to the stock box, which is the further piece away from the turbo, and therefore, the least critical for flow in the case of the turbo motor. Our inlet system has been designed to truely remove all air resistance where possible on the path to the turbo, and therefore allowing the turbo to truely breathe freely and not hold back to engine under high duty operation. This will also promote quicker spoolup due to less air resistance. When choosing an \"intake\" or \"inlet\" system for the turbo engine, consider how much gain in flow am I really getting out of the entire system. Does the system increase flow all the way to the turbo or does it leave \"bottlenecks\" from the factory untouched? Our system has been designed to optimize flow from start to end, allowing as much air as possible into the turbo....directly.\u003c\/div\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e","brand":"ATP Turbo","offers":[{"title":"Black","offer_id":32947750207587,"sku":"ATP-VVW-171-BLK","price":861.06,"currency_code":"NZD","in_stock":true},{"title":"Blue","offer_id":32947750273123,"sku":"ATP-VVW-171-BLU","price":861.06,"currency_code":"NZD","in_stock":true},{"title":"Red","offer_id":32947750240355,"sku":"ATP-VVW-171-RED","price":861.06,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/ATP-VVW-171_450-1.jpg?v=1597725297"},{"product_id":"atp-turbo-high-flow-intake-extension-maf-hsg-and-filter-kit-for-mazdaspeed6","title":"ATP Turbo High Flow Intake Extension, MAF HSG And Filter Kit For Mazdaspeed6","description":"\u003cimg src=\"https:\/\/www.atpturbo.com\/mm5\/graphics\/00000001\/Catalog%20Images\/Vehicle%20Specific\/ATP-MS6-012_450-2.jpg\" border=\"0\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eHigh flow inlet extension including 3\" billet aluminum MAF housing, 3\" inlet elbow, and 3\" open element filter. Bolts onto our 3\" inlet pipe kit to complete a true high flow 3\" intake tract. Deletes the restrictive factory airbox and clears the area inside the driver side fender and headlight area to run FMIC pipes in and out. Specify color: black, red, or blue silicone connectors.\u003c\/span\u003e","brand":"ATP Turbo","offers":[{"title":"Blue","offer_id":32985454215267,"sku":"ATP-MS6-012-B","price":516.64,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":32985454248035,"sku":"ATP-MS6-012-BLK","price":516.64,"currency_code":"NZD","in_stock":true},{"title":"Red","offer_id":32985454182499,"sku":"ATP-MS6-012-R","price":516.64,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/ATP-MS6-012_450.jpg?v=1598703420"},{"product_id":"corksport-stage-i-power-series-short-ram-intake-for-cx7","title":"CorkSport Stage I Power Series Short Ram Intake for CX7 (non turbo)","description":"\u003cdiv class=\"cp-lazy-video\" data-ca-lazy-video-url=\"https:\/\/www.youtube.com\/embed\/-cXg3F0SQT4?rel=0\u0026amp;showinfo=0\u0026amp;autoplay=1\" data-mce-fragment=\"1\"\u003e\u003cimg title=\"CorkSport Mazda Performance Gauges Video\" src=\"https:\/\/img.youtube.com\/vi\/-cXg3F0SQT4\/maxresdefault.jpg\" class=\"cp-lazy\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/img.youtube.com\/vi\/-cXg3F0SQT4\/maxresdefault.jpg\"\u003e\u003c\/div\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eOne of the easiest and most beneficial performance enhancements you can do for your vehicle,\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e the CorkSport Power Series Short Ram Intake replaces your factory airbox with an open intake system allowing more air into the intake chamber. The CorkSport CX7 Short Ram Intake includes our precision machined MAF housing made from one piece of billet aluminum with included air straightener, durable dry flow air filter and custom reinforced silicone connector. In initial testing, the CorkSport CX7 Short Ram Intake netted peak gains of +12HP and +17 lb torque.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eThe CorkSport Advantage:\u003c\/b\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"descriptionbullets\" data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cb data-mce-fragment=\"1\"\u003ePrevent air leaks and inaccurate readings that can cause check-engine lights:\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eThe MAF housing is precision machined from billet aluminum with included air straightener.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cb data-mce-fragment=\"1\"\u003eDurable Dry Flow Air Filter:\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eReusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cb data-mce-fragment=\"1\"\u003eCustom reinforced silicone connector\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003econstructed with multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cb data-mce-fragment=\"1\"\u003eStainless steel T-bolt clamps:\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eAvailable in stealth black or polished stainless and ensure an airtight seal which prevents unmetered airflow\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eUpgrade to a CARB legal Stage Two CorkSport Power Series Intake with a Turbo Inlet Pipe \u003c\/span\u003eFor the best value on the market\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cb data-mce-fragment=\"1\"\u003eCorksport Service and Support:\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eReceive a two year warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"CorkSport","offers":[{"title":"Blue \/ Black","offer_id":33114083754083,"sku":"Cx7-6-115-BL\/BLK\/BL","price":393.93,"currency_code":"NZD","in_stock":true},{"title":"Blue \/ Black","offer_id":33114083819619,"sku":"Cx7-6-115-BL\/BLK\/BLK","price":393.93,"currency_code":"NZD","in_stock":true},{"title":"Blue \/ Black","offer_id":33114083786851,"sku":"Cx7-6-115-BL\/BLK\/R","price":393.93,"currency_code":"NZD","in_stock":true},{"title":"Blue \/ Red","offer_id":33114083852387,"sku":"Cx7-6-115-BL\/R\/BL","price":393.93,"currency_code":"NZD","in_stock":true},{"title":"Blue \/ Red","offer_id":33114083917923,"sku":"Cx7-6-115-BL\/R\/BLK","price":393.93,"currency_code":"NZD","in_stock":true},{"title":"Blue \/ Red","offer_id":33114083885155,"sku":"Cx7-6-115-BL\/R\/R","price":393.93,"currency_code":"NZD","in_stock":true},{"title":"Black \/ Black","offer_id":33114083360867,"sku":"Cx7-6-115-BLK\/BLK\/BL","price":393.93,"currency_code":"NZD","in_stock":true},{"title":"Black \/ Black","offer_id":33114083426403,"sku":"Cx7-6-115-BLK\/BLK\/BLK","price":393.93,"currency_code":"NZD","in_stock":true},{"title":"Black \/ Black","offer_id":33114083393635,"sku":"Cx7-6-115-BLK\/BLK\/R","price":393.93,"currency_code":"NZD","in_stock":true},{"title":"Black \/ Red","offer_id":33114083459171,"sku":"Cx7-6-115-BLK\/R\/BL","price":393.93,"currency_code":"NZD","in_stock":true},{"title":"Black \/ Red","offer_id":33114083524707,"sku":"Cx7-6-115-BLK\/R\/BLK","price":393.93,"currency_code":"NZD","in_stock":true},{"title":"Black \/ Red","offer_id":33114083491939,"sku":"Cx7-6-115-BLK\/R\/R","price":393.93,"currency_code":"NZD","in_stock":true},{"title":"Red \/ Black","offer_id":33114083557475,"sku":"Cx7-6-115-R\/BLK\/BL","price":393.93,"currency_code":"NZD","in_stock":true},{"title":"Red \/ Black","offer_id":33114083623011,"sku":"Cx7-6-115-R\/BLK\/BLK","price":393.93,"currency_code":"NZD","in_stock":true},{"title":"Red \/ Black","offer_id":33114083590243,"sku":"Cx7-6-115-R\/BLK\/R","price":393.93,"currency_code":"NZD","in_stock":true},{"title":"Red \/ Red","offer_id":33114083655779,"sku":"Cx7-6-115-R\/R\/BL","price":393.93,"currency_code":"NZD","in_stock":true},{"title":"Red \/ Red","offer_id":33114083721315,"sku":"Cx7-6-115-R\/R\/BLK","price":393.93,"currency_code":"NZD","in_stock":true},{"title":"Red \/ Red","offer_id":33114083688547,"sku":"Cx7-6-115-R\/R\/R","price":393.93,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Cx-7-intake_1.jpg?v=1601441954"},{"product_id":"corksport-cx7-stage-ii-power-series-short-ram-intake","title":"CorkSport Cx7 Stage II Power Series Short Ram Intake","description":"\u003cdiv class=\"fluid-width-video-wrapper\" data-mce-fragment=\"1\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/ZIA_qA2ukdI?enablejsapi=1\u0026amp;origin=https:%2F%2Fcorksport.com\" id=\"fitvid787332\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/ZIA_qA2ukdI?enablejsapi=1\u0026amp;origin=https:%2F%2Fcorksport.com\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eGive your Mazda CX-7 immediate boosts in horsepower and torque\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e by bringing more air into the intake chamber. Our simple to install SRI includes a MAF housing that is precision machined from one piece of billet aluminum with included air straightener. Designed to maintain optimal flow and generate ideal performance, Corksport engineers each part with exacting tolerances and uses the latest in computer aided manufacturing techniques to make sure you get the highest quality, best performing part for your money. In initial testing, the CorkSport CX-7 Short Ram Intake netted max gains of +25 lb torque and +33 HP.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eThe CorkSport Advantage:\u003c\/b\u003e\u003cbr\u003e\n\u003cdiv class=\"descriptionbullets\" data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cb data-mce-fragment=\"1\"\u003eBest value on the market!\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eOur intake kit includes the turbo inlet pipe to completely replace the stock intake tubing.Purchased separately this part can cost anywhere from $150-$200\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cb data-mce-fragment=\"1\"\u003eChoose from 108 different color combinations\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eto customize the look of your SRI\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cb data-mce-fragment=\"1\"\u003ePrevent air leaks and inaccurate readings\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ethat can cause check-engine lights: The MAF sensor is secured to the housing using T304 stainless fasteners for a rock solid connection\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cb data-mce-fragment=\"1\"\u003eDurable Dry Flow Air Filter:\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eReusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cb data-mce-fragment=\"1\"\u003eCARB Approved:\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eDesigned and approved to meet California Air Resources Board Emissions Standards: Carb Approval\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cb data-mce-fragment=\"1\"\u003eCustom reinforced silicone connector\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003econstructed with multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cb data-mce-fragment=\"1\"\u003eStainless steel T-bolt clamps:\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eAvailable in stealth black or polished stainless and ensure an airtight seal which prevents unmetered airflow\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cb data-mce-fragment=\"1\"\u003eCorksport Service and Support:\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eReceive a two year warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"CorkSport","offers":[{"title":"Mazda CX7 \/ Blue","offer_id":33114108919907,"sku":"Cx7-6-118-100-CX7-BL\/BLK","price":580.54,"currency_code":"NZD","in_stock":true},{"title":"Mazda CX7 \/ Blue","offer_id":33114108952675,"sku":"Cx7-6-118-100-CX7-BL\/R","price":580.54,"currency_code":"NZD","in_stock":true},{"title":"Mazda CX7 \/ Black","offer_id":33114109050979,"sku":"Cx7-6-118-100-CX7-BLK\/BLK","price":580.54,"currency_code":"NZD","in_stock":true},{"title":"Mazda CX7 \/ Black","offer_id":33114109083747,"sku":"Cx7-6-118-100-CX7-BLK\/R","price":580.54,"currency_code":"NZD","in_stock":true},{"title":"Mazda CX7 \/ Red","offer_id":33114108985443,"sku":"Cx7-6-118-100-CX7-R\/BLK","price":580.54,"currency_code":"NZD","in_stock":true},{"title":"Mazda CX7 \/ Red","offer_id":33114109018211,"sku":"Cx7-6-118-100-CX7-R\/R","price":580.54,"currency_code":"NZD","in_stock":true},{"title":"Mazda CX7 \/ White","offer_id":33114109116515,"sku":"Cx7-6-118-100-CX7-W\/BLK","price":580.54,"currency_code":"NZD","in_stock":true},{"title":"Mazda CX7 \/ White","offer_id":33114109149283,"sku":"Cx7-6-118-100-CX7-W\/R","price":580.54,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Mazdaspeed-3-SRI-Black_aksv-gx.jpg?v=1601441960"},{"product_id":"corksport-4inch-intake-system-ms3-gen-1-2","title":"Corksport 4inch Intake System - MS3 Gen 1 \u0026 2","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIf you’re ready to take your Speed 3 to the next level and have some big power potential, look no further than the CorkSport 4 Inch Intake. Sooner or later when shooting for very high power levels you will max out MAF sensor flow and need a larger intake to feed your engine all the air it wants. The CorkSport 4” Intake combines the ease of use of our smaller intakes with enough flow to support over 900whp. Read on for full details and more pictures.\u003c\/span\u003e\u003ca href=\"https:\/\/facebook.com\/corksport\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/facebook.com\/corksport\" target=\"_blank\"\u003e#ZoomZoom\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product_body\"\u003e\n\u003ch2\u003eThe CorkSport Advantage\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_body\"\u003e\n\u003cimg alt=\"Four Inch Cold Air intake for the Speed3\" src=\"https:\/\/corksport.com\/images\/Mazdaspeed\/Mazdaspeed-3-4-inch-intake\/ms3-4-inch-intake-system.jpg\" class=\"product_body_right cp-lazy\"\u003e\n\u003ch3\u003eFitment Focused:\u003c\/h3\u003e\n\u003cp\u003eIn order to make the CorkSport 4” Intake the best it could be, we went back to the drawing board to rethink the way we design our intake system. The main change is to the MAF housing connection; instead of a silicone coupler to attach the MAF housing, the billet MAF housing is TIG welded directly to the turbo inlet pipe. This gave us a ton of freedom to optimize fitment and filter size. You end up with a four inch intake that takes up less room than some 3.5” intakes while retaining all OEM mounting points and OEM BPV, PCV, and boost vent ports. It even fits with our 51R battery box!\u003c\/p\u003e\n\u003cdiv class=\"product_body\"\u003e\n\u003cimg alt=\"The best Mazdaspeed3 air intake\" src=\"https:\/\/corksport.com\/images\/Mazdaspeed\/Mazdaspeed-3-4-inch-intake\/mazda-3-mps-4-intake-system.jpg\" class=\"product_body_right cp-lazy\"\u003e\n\u003ch3\u003ePower Potential:\u003c\/h3\u003e\n\u003cp\u003eThe main reason behind a 4” intake is the bonus power potential it offers. By moving up in intake size, you increase the maximum amount of air your car can ingest. With a tune, you also increase the amount of air the MAF sensor can read before it maxes out its voltage operating range. While typically not offering a power bump on lower horsepower cars, MS3’s already with big power can see an increase in power, just by reducing the airflow restriction before the turbo. This increases efficiency \u0026amp; increases the operating range of the MAF sensor to support over 900whp.\u003c\/p\u003e\n\u003cdiv class=\"product_body\"\u003e\n\u003cimg alt=\"Highest horsepower Mazdaspeed 3 intake\" src=\"https:\/\/corksport.com\/images\/Mazdaspeed\/Mazdaspeed-3-4-inch-intake\/Mazdaspeed-3-Air-filter-performance.jpg\" class=\"product_body_right cp-lazy\"\u003e\n\u003ch3\u003eOptimized Filter:\u003c\/h3\u003e\n\u003cp\u003eThe CorkSport 4” Intake System reduces flow restrictions by using a very large air filter measuring 7 inch in length and 4.5 inches at the MAF inlet. Filter size is something most large intake systems ignore, which can ruin some of the benefits of going to a large intake. After all, the pipe size does no good if the filter flows poorly and\/or is too small. We chose aFe’s Pro Dry S material for fantastic filtration and flow without the risk of an oiled filter dirtying the MAF sensor. Check out the image, you can see how much bigger this is than our normal filters!\u003c\/p\u003e\n\u003cdiv class=\"product_body\"\u003e\n\u003cimg alt=\"4 inch short ram intake for the Mazdaspeed 3\" src=\"https:\/\/corksport.com\/images\/Mazdaspeed\/Mazdaspeed-3-4-inch-intake\/mazdaspeed-intake-four-inch.jpg\" class=\"product_body_right cp-lazy\"\u003e\n\u003ch3\u003eAccurate Flow:\u003c\/h3\u003e\n\u003cp\u003eWhile the design may be a bit different from our typical intakes, the CS 4” intake still retains a billet aluminum MAF sensor housing. When combined with the pre-installed air straighteners, you get stable and accurate airflow readings. This makes it easier to tune and ensures your car will consistently read the actual amount of airflow entering your engine.\u003c\/p\u003e\n\u003cdiv class=\"product_body\"\u003e\n\u003cimg alt=\"Speed3 4 inch turbo inlet hose\" src=\"https:\/\/corksport.com\/images\/Mazdaspeed\/Mazdaspeed-3-4-inch-intake\/Mazdaspeed3-turbo-inlet-pipe-4-inch.jpg\" class=\"product_body_right cp-lazy\"\u003e\n\u003ch3\u003eMaterials \u0026amp; Manufacturing:\u003c\/h3\u003e\n\u003cp\u003eEach CorkSport 4” Intake System is made from mandrel bent 4” 6061 aluminum tubing. This ensures good strength and smooth airflow into your turbo. The billet MAF housing and all ports are TIG welded in place for upmost strength and reliability. The main intake pipe is finished off in wrinkle black powdercoat for a clean look that will last and match any engine bay. Also included is your choice of turbo inlet coupler made from 4-ply reinforced silicone. We offer couplers to fit 4.0”, 3.5”, and OEM sized compressor housings. Finally, stainless steel T-bolt clamps are included to prevent vacuum leaks!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cbr\u003e\u003cspan color=\"red\" style=\"color: red;\"\u003e\u003cimg src=\"https:\/\/corksport.com\/public_html\/Product%20Listings\/_Product%20Listing%20Images\/CS-Website-Refresh-Product-Subhead-Advisory.jpg\" class=\"product_body cp-lazy\"\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eA tune is required for installation of this intake. Your tuner must scale the MAF sensor to suit the larger diameter MAF housing.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eYou will need to relocate and\/or decrease the size of your battery and battery box to install this intake along with adjusting the wiring harness near the battery box and fuse panel. The CorkSport 51R Battery Box works great with the 4” Intake System.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCertain intercooler piping setups may not work with the CorkSport 4” Intake.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdiv class=\"product_body\"\u003e\n\u003ch2\u003eAdditional Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2007-2013 Mazdaspeed 3.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned \u0026amp; Developed in America:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDesigned, tested, and validated in Vancouver, Washington, in the Pacific Northwest.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorkSport Service \u0026amp; Support:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2 year limited warranty, full color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"CorkSport","offers":[{"title":"OEM\/CST4","offer_id":33179183579235,"sku":"AXL-6-2101-10","price":829.7,"currency_code":"NZD","in_stock":true},{"title":"3.5\"","offer_id":33179183612003,"sku":"AXL-6-2101-11","price":829.7,"currency_code":"NZD","in_stock":true},{"title":"4\" CST5\/CST6","offer_id":33179183644771,"sku":"AXL-6-2101-12","price":829.7,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/MS3-4inch-intake.jpg?v=1602825733"},{"product_id":"injen-rd-cold-air-intake-system-02-03-toyota-matrix-xrs","title":"Injen RD Cold Air Intake System - '02-'03 Toyota Matrix XRS","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdd some easy horsepower to your Ride with this RD Series Performance cold air intake (CAI) from Injen Technology! The engineers at Injen have spent considerable amounts of time designing, testing, and perfecting this CAI to produce some serious bolt-on power while also providing amazing engine bay aesthetics. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A\/F) ratios are maintained throughout the powerband. \u003c\/span\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":33239440621667,"sku":"injRD2075P","price":741.69,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/5fa62c2fb1b52af70713bde960658607.jpg?v=1603948874"},{"product_id":"ams-infiniti-q50-q60-red-alpha-cold-air-intake-kit","title":"AMS Infiniti Q50\/Q60 Red Alpha Cold Air Intake Kit","description":"\u003cdiv class=\"woocommerce-tabs wc-tabs-wrapper\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\" id=\"tab-description\" role=\"tabpanel\" aria-labelledby=\"tab-title-description\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe INFINITI Q50\/Q60 Red Alpha Cold Air Intake Kit is simply the best engineered, best performing, cold air intake system available for your INFINITI VR30 equipped Q50 and Q60. By letting the turbos ingest all the cold air they need, our intake system boosts power exactly where you want it, high in the rpm range. In addition, it allows you to hear your twin turbos spool up which is something you as an enthusiast can really appreciate. AMS Performance is excited to introduce the INFINITI Q50\/Q60 Red Alpha Cold Air Intake Kit!\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNow CARB approved!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg class=\"size-large wp-image-43454 aligncenter lazyloaded\" src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/ams_red_alpha_intake_mods-4-1024x684.jpg\" data-src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/ams_red_alpha_intake_mods-4-1024x684.jpg\" alt=\"q60 vr30 intake system mods upgrade kit\" width=\"1024\" height=\"684\" data-srcset=\"https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/ams_red_alpha_intake_mods-4-1024x684.jpg 1024w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/ams_red_alpha_intake_mods-4-400x267.jpg 400w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/ams_red_alpha_intake_mods-4-300x200.jpg 300w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/ams_red_alpha_intake_mods-4-768x513.jpg 768w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/ams_red_alpha_intake_mods-4-1080x721.jpg 1080w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/ams_red_alpha_intake_mods-4-510x340.jpg 510w\" data-sizes=\"(max-width: 1024px) 100vw, 1024px\" sizes=\"(max-width: 1024px) 100vw, 1024px\" srcset=\"https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/ams_red_alpha_intake_mods-4-1024x684.jpg 1024w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/ams_red_alpha_intake_mods-4-400x267.jpg 400w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/ams_red_alpha_intake_mods-4-300x200.jpg 300w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/ams_red_alpha_intake_mods-4-768x513.jpg 768w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/ams_red_alpha_intake_mods-4-1080x721.jpg 1080w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/ams_red_alpha_intake_mods-4-510x340.jpg 510w\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/ams_red_alpha_intake_mods-4-1024x684.jpg\"\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eThe Power of Focused Engineering\u003c\/h3\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAMS Performance is an engineering company first. We have built our almost 20 year reputation as a leading motorsports aftermarket component manufacturer by creating the highest performing parts through a focused engineering approach to design. The focused design of the INFINITI Q50\/Q60 Red Alpha Cold Air Intake Kit is what makes it the highest power producing Q50 and Q60 VR30 intake system on the market, and the only intake system chosen by\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/parts.infinitiusa.com\/nissanparts\/?selyear=2017\u0026amp;selmodel=Q60+Coupe\u0026amp;searchText=\u0026amp;action=accessories\u0026amp;makeid=14\u0026amp;siteid=15\u0026amp;catalogID=2371\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/parts.infinitiusa.com\/nissanparts\/?selyear=2017\u0026amp;selmodel=Q60+Coupe\u0026amp;searchText=\u0026amp;action=accessories\u0026amp;makeid=14\u0026amp;siteid=15\u0026amp;catalogID=2371\"\u003eINFINITI USA\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eto be part of INFINITI’s Motorsports Catalog.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg class=\"size-large wp-image-43566 aligncenter ls-is-cached lazyloaded\" src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/Q50_intake_boxes-1024x550.jpg\" data-src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/Q50_intake_boxes-1024x550.jpg\" alt=\"INFINITI intake mods upgrade kit\" width=\"1024\" height=\"550\" data-srcset=\"https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_boxes-1024x550.jpg 1024w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_boxes-400x215.jpg 400w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_boxes-300x161.jpg 300w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_boxes-768x412.jpg 768w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_boxes-1080x580.jpg 1080w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_boxes-510x274.jpg 510w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_boxes.jpg 1147w\" data-sizes=\"(max-width: 1024px) 100vw, 1024px\" sizes=\"(max-width: 1024px) 100vw, 1024px\" srcset=\"https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_boxes-1024x550.jpg 1024w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_boxes-400x215.jpg 400w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_boxes-300x161.jpg 300w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_boxes-768x412.jpg 768w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_boxes-1080x580.jpg 1080w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_boxes-510x274.jpg 510w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_boxes.jpg 1147w\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/Q50_intake_boxes-1024x550.jpg\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe main components of the INFINITI Q50\/Q60 Red Alpha Cold Air Intake Kit are the sealed cold air intake boxes. Our SnailWorks© Engineering Team knows that heat is the biggest power robbing factor that plagues other inferior intake systems. That is why they designed the Red Alpha air boxes to seal out blistering engine bay temperatures. They then took advantage of your car’s existing intake cowl that funnels fresh air into the intake boxes by designing air box openings that match up perfectly to its air ducts. Our Engineers did not stop there. When they focused on the other system components they found even more places to improve the design.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg class=\"wp-image-43572 size-large aligncenter lazyloaded\" src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/Q50_intake_bell_horn-1024x550.jpg\" data-src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/Q50_intake_bell_horn-1024x550.jpg\" alt=\"Q60 intake mods upgrade kit\" width=\"1024\" height=\"550\" data-srcset=\"https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_bell_horn-1024x550.jpg 1024w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_bell_horn-400x215.jpg 400w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_bell_horn-300x161.jpg 300w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_bell_horn-768x412.jpg 768w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_bell_horn-1080x580.jpg 1080w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_bell_horn-510x274.jpg 510w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_bell_horn.jpg 1147w\" data-sizes=\"(max-width: 1024px) 100vw, 1024px\" sizes=\"(max-width: 1024px) 100vw, 1024px\" srcset=\"https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_bell_horn-1024x550.jpg 1024w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_bell_horn-400x215.jpg 400w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_bell_horn-300x161.jpg 300w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_bell_horn-768x412.jpg 768w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_bell_horn-1080x580.jpg 1080w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_bell_horn-510x274.jpg 510w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_bell_horn.jpg 1147w\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/Q50_intake_bell_horn-1024x550.jpg\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe INFINITI Q50\/Q60 Red Alpha Cold Air Intake Kit’s dry media air filters feature a revolutionary integrated bell horn. The AMS Engineering Team designed a bell horn right into the design of the filter. This takes the clean, cold air, that is fed into the system through the dry media filters and smoothly transitions it into the stock MAF housings. This design feature eliminates the turbulence that leads to the power loss, instability, and “bucking” of other intake systems. The last piece to focus on was the silicone that feeds the cold air into the two Garrett turbos.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg class=\"size-large wp-image-43562 aligncenter lazyloaded\" src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/Q50_intake_transitions-1024x550.jpg\" data-src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/Q50_intake_transitions-1024x550.jpg\" alt=\"INFINITI Q60 intake mods upgrade kit\" width=\"1024\" height=\"550\" data-srcset=\"https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_transitions-1024x550.jpg 1024w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_transitions-400x215.jpg 400w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_transitions-300x161.jpg 300w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_transitions-768x412.jpg 768w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_transitions-1080x580.jpg 1080w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_transitions-510x274.jpg 510w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_transitions.jpg 1147w\" data-sizes=\"(max-width: 1024px) 100vw, 1024px\" sizes=\"(max-width: 1024px) 100vw, 1024px\" srcset=\"https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_transitions-1024x550.jpg 1024w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_transitions-400x215.jpg 400w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_transitions-300x161.jpg 300w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_transitions-768x412.jpg 768w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_transitions-1080x580.jpg 1080w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_transitions-510x274.jpg 510w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Q50_intake_transitions.jpg 1147w\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/Q50_intake_transitions-1024x550.jpg\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe air boxes and the dry media filters are part of a system that is designed to smoothly feed air into the VR30’s twin turbos. To continue the concept of delivering the cold air as smoothly as possible to the turbos the Red Alpha silicone couplers needed to follow suit. So, our Engineers designed the silicone to seamlessly transition the cold air into the turbos. To take the design even further they added wire reinforcement into the construction of the silicone to ensure that they maintained their shape from the crushing vacuum forces of the turbos. The design of the new Red Alpha Cold Air Intake System sets it apart from everything on the market but the best aspect is the performance gains.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eThe Results\u003c\/h3\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cdiv class=\"fluid-width-video-wrapper\" data-mce-fragment=\"1\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/szbjF2Txtmc\" name=\"fitvid0\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/szbjF2Txtmc\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRED ALPHA TUNE: Red Alpha Intakes vs Stock (Average of multiple runs)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"attachment_43699\" class=\"wp-caption aligncenter\" data-mce-fragment=\"1\"\u003e\n\u003cimg aria-describedby=\"caption-attachment-43699\" class=\"wp-image-43699 size-large lazyloaded\" src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/Intake_Alpha_tune-1024x467.jpg\" data-src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/Intake_Alpha_tune-1024x467.jpg\" alt=\"vr30 intake dyno mods upgrade kit\" width=\"1024\" height=\"467\" data-srcset=\"https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune-1024x467.jpg 1024w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune-400x182.jpg 400w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune-300x137.jpg 300w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune-768x350.jpg 768w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune-1080x492.jpg 1080w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune-510x232.jpg 510w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune.jpg 1806w\" data-sizes=\"(max-width: 1024px) 100vw, 1024px\" sizes=\"(max-width: 1024px) 100vw, 1024px\" srcset=\"https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune-1024x467.jpg 1024w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune-400x182.jpg 400w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune-300x137.jpg 300w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune-768x350.jpg 768w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune-1080x492.jpg 1080w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune-510x232.jpg 510w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune.jpg 1806w\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/Intake_Alpha_tune-1024x467.jpg\"\u003e\n\u003cp id=\"caption-attachment-43699\" class=\"wp-caption-text\" data-mce-fragment=\"1\"\u003eStock Intake vs Red Alpha Intake with Red Alpha Tune.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"attachment_43698\" class=\"wp-caption aligncenter\" data-mce-fragment=\"1\"\u003e\n\u003cimg aria-describedby=\"caption-attachment-43698\" class=\"wp-image-43698 size-large lazyloaded\" src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/Intake_Alpha_tune_delta-1024x313.jpg\" data-src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/Intake_Alpha_tune_delta-1024x313.jpg\" alt=\"q50 q60 intake dyno mods upgrade kit\" width=\"1024\" height=\"313\" data-srcset=\"https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune_delta-1024x313.jpg 1024w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune_delta-400x122.jpg 400w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune_delta-300x92.jpg 300w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune_delta-768x235.jpg 768w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune_delta-1080x330.jpg 1080w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune_delta-510x156.jpg 510w\" data-sizes=\"(max-width: 1024px) 100vw, 1024px\" sizes=\"(max-width: 1024px) 100vw, 1024px\" srcset=\"https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune_delta-1024x313.jpg 1024w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune_delta-400x122.jpg 400w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune_delta-300x92.jpg 300w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune_delta-768x235.jpg 768w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune_delta-1080x330.jpg 1080w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Intake_Alpha_tune_delta-510x156.jpg 510w\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/Intake_Alpha_tune_delta-1024x313.jpg\"\u003e\n\u003cp id=\"caption-attachment-43698\" class=\"wp-caption-text\" data-mce-fragment=\"1\"\u003eAn average of +17 Wheel Horsepower gain with Red Alpha Cold Air Intakes and Alpha Tune over Stock Intakes and Alpha Tune.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSTOCK TUNE: Red Alpha Intakes vs Stock (Average of multiple runs)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"attachment_43708\" class=\"wp-caption aligncenter\" data-mce-fragment=\"1\"\u003e\n\u003cimg aria-describedby=\"caption-attachment-43708\" class=\"wp-image-43708 size-large lazyloaded\" src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/Stock_red_sport_intake-1024x463.jpg\" data-src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/Stock_red_sport_intake-1024x463.jpg\" alt=\"Q50 Q60 intake dyno mods upgrade kit\" width=\"1024\" height=\"463\" data-srcset=\"https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_intake-1024x463.jpg 1024w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_intake-400x181.jpg 400w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_intake-300x136.jpg 300w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_intake-768x347.jpg 768w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_intake-1080x489.jpg 1080w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_intake-510x231.jpg 510w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_intake.jpg 1881w\" data-sizes=\"(max-width: 1024px) 100vw, 1024px\" sizes=\"(max-width: 1024px) 100vw, 1024px\" srcset=\"https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_intake-1024x463.jpg 1024w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_intake-400x181.jpg 400w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_intake-300x136.jpg 300w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_intake-768x347.jpg 768w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_intake-1080x489.jpg 1080w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_intake-510x231.jpg 510w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_intake.jpg 1881w\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/Stock_red_sport_intake-1024x463.jpg\"\u003e\n\u003cp id=\"caption-attachment-43708\" class=\"wp-caption-text\" data-mce-fragment=\"1\"\u003eRed Alpha Cold Air Intakes vs stock intakes on stock tune.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"attachment_43709\" class=\"wp-caption aligncenter\" data-mce-fragment=\"1\"\u003e\n\u003cimg aria-describedby=\"caption-attachment-43709\" class=\"wp-image-43709 size-large lazyloaded\" src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/Stock_red_sport_tune_delta-1024x320.jpg\" data-src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/Stock_red_sport_tune_delta-1024x320.jpg\" alt=\"\" width=\"1024\" height=\"320\" data-srcset=\"https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_tune_delta-1024x320.jpg 1024w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_tune_delta-400x125.jpg 400w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_tune_delta-300x94.jpg 300w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_tune_delta-768x240.jpg 768w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_tune_delta-1080x338.jpg 1080w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_tune_delta-510x159.jpg 510w\" data-sizes=\"(max-width: 1024px) 100vw, 1024px\" sizes=\"(max-width: 1024px) 100vw, 1024px\" srcset=\"https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_tune_delta-1024x320.jpg 1024w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_tune_delta-400x125.jpg 400w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_tune_delta-300x94.jpg 300w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_tune_delta-768x240.jpg 768w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_tune_delta-1080x338.jpg 1080w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/Stock_red_sport_tune_delta-510x159.jpg 510w\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/Stock_red_sport_tune_delta-1024x320.jpg\"\u003e\n\u003cp id=\"caption-attachment-43709\" class=\"wp-caption-text\" data-mce-fragment=\"1\"\u003eAn Average of +17 Wheel Horsepower gain with Red Alpha Cold Air Intakes and Alpha Tune over Stock Intakes and Alpha Tune.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eBenefits\u003c\/h3\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTrue Cold Air Intake\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSealed Intake Boxes\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCARB Approved\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDry Media Filters\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuilt-in Bell Horn Filter Design\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNO Check Engine Light\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUtilizes Stock MAF Housing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo Surging or Other Drivability Issues\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWire Reinforced Silicone\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilicone is Designed for Smooth Air Delivery\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOnly Intakes Chosen By INFINITI USA for their Motorsport Catalog\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy Install\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo Special Tools Required\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDownload the INFINITI Q50\/Q60 Red Alpha Cold Air Intake System Installation Instructions \u003ca href=\"https:\/\/amsperformance.com\/wp-content\/uploads\/2020\/01\/Infiniti-Alpha-Air-Box-V4.pdf\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/amsperformance.com\/wp-content\/uploads\/2020\/01\/Infiniti-Alpha-Air-Box-V4.pdf\"\u003ehere.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eApplications\u003c\/h3\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2017+ INFINITI Q60 with 3.0L Twin Turbo VR30\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2016+ INFINITI Q50 with 3.0L Twin Turbo VR30\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg class=\"size-large wp-image-43719 aligncenter lazyloaded\" src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/INFINITI_red_alpha_intake_system_components3_small-1024x683.jpg\" data-src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/INFINITI_red_alpha_intake_system_components3_small-1024x683.jpg\" alt=\"Q50 Q60 intake mods upgrade kit\" width=\"1024\" height=\"683\" data-srcset=\"https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/INFINITI_red_alpha_intake_system_components3_small-1024x683.jpg 1024w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/INFINITI_red_alpha_intake_system_components3_small-400x267.jpg 400w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/INFINITI_red_alpha_intake_system_components3_small-300x200.jpg 300w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/INFINITI_red_alpha_intake_system_components3_small-768x513.jpg 768w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/INFINITI_red_alpha_intake_system_components3_small-1080x721.jpg 1080w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/INFINITI_red_alpha_intake_system_components3_small-510x340.jpg 510w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/INFINITI_red_alpha_intake_system_components3_small.jpg 1500w\" data-sizes=\"(max-width: 1024px) 100vw, 1024px\" sizes=\"(max-width: 1024px) 100vw, 1024px\" srcset=\"https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/INFINITI_red_alpha_intake_system_components3_small-1024x683.jpg 1024w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/INFINITI_red_alpha_intake_system_components3_small-400x267.jpg 400w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/INFINITI_red_alpha_intake_system_components3_small-300x200.jpg 300w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/INFINITI_red_alpha_intake_system_components3_small-768x513.jpg 768w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/INFINITI_red_alpha_intake_system_components3_small-1080x721.jpg 1080w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/INFINITI_red_alpha_intake_system_components3_small-510x340.jpg 510w, https:\/\/uploads.cdn.ascendpress.io\/amsperformance\/uploads\/2017\/10\/INFINITI_red_alpha_intake_system_components3_small.jpg 1500w\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/2017\/10\/INFINITI_red_alpha_intake_system_components3_small-1024x683.jpg\"\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eNotes\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cdiv class=\"fluid-width-video-wrapper\" data-mce-fragment=\"1\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/TENjuoyPeu4\" name=\"fitvid1\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/TENjuoyPeu4\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe filters use specially designed media that allows performance and efficiency to be restored to near new each time by simply using compressed air (30-40 psi) from the inside out, making frequent washing  unnecessary in order to restore filter performance. For a deep cleaning from extreme environments, a biodegradable cleaner such as Simple Green or other \u003cu data-mce-fragment=\"1\"\u003emild \u003c\/u\u003eshop degreasers can be used. Simply place the filter in a solution or spray the cleaner on the filter. Allow the solution to loosen the particulate and then rinse thoroughly. Shake the filter or use compressed air from the inside outward to remove residual water and allow a full day or two to dry.\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.amsperformance.com\/proposition65\/\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.amsperformance.com\/proposition65\/\"\u003eProposition 65\u003c\/a\u003e\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003csection class=\"related products\" data-mce-fragment=\"1\"\u003e\u003c\/section\u003e","brand":"ATP Turbo","offers":[{"title":"Default Title","offer_id":33310219436131,"sku":"ALP.28.08.0001-1","price":1324.58,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/ams_red_alpha_intake_mods-6-2.jpg?v=1606973351"},{"product_id":"prl-2016-honda-civic-non-si-1-5t-cobra-cold-air-intake-system","title":"PRL 2016+ Honda Civic Non-Si 1.5T Cobra Cold Air Intake System","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003elease Read Before Ordering:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNO TUNE OR CALIBRATION REQUIRED FOR STREET MAF HOUSING\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRACE MAF-SPECIFIC CALIBRATION OR TUNE\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eIS REQUIRED FOR RACE MAF HOUSING\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHONDATA \u0026amp; KTUNER BOTH OFFER RACE MAF BASEMAP CALIBRATIONS\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTWO STEP PERFORMANCE \"TSP\" TUNE(S) \u0026amp; PHEARABLE TUNE(S) COMPATIBLE BY SELECTING \"RACE MAF\" OPTION\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFITS 2016+ HONDA CIVIC NON-SI – FOR SI APPLICATIONS, \u003ca href=\"https:\/\/prlmotorsports.com\/civicxcoldairintake.aspx\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/prlmotorsports.com\/civicxcoldairintake.aspx\"\u003ePLEASE VIEW OUR OTHER LISTING(S)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFITS HONDA SENSING PACKAGE\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCANADIAN MODELS REQUIRE \u003ca href=\"https:\/\/prlmotorsports.com\/usdmwindsheildwasherreservoirconversionkit2016civicsi.aspx\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/prlmotorsports.com\/usdmwindsheildwasherreservoirconversionkit2016civicsi.aspx\"\u003eUSDM WINDSHIELD WASHER RESERVOIR CONVERSION KIT\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNOT COMPATIBLE WITH FACTORY CVT COOLER (SPAIN, TURKEY, ETC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThere’s a reason our Cobra Cold Air Intake Systems is a constant topic of discussion and so highly regarded. Our CNC machined billet aluminum MAF Housing was designed to provide *factory-spec fuel trims (-4% of factory STFT \u0026amp; LTFT) for optimal drivability and performance. The Cobra CAI utilizes a 4\" volume from the air filter into the MAF Housing and is available with two different MAF housing choices; a Street housing and a Race housing. Both housings utilizes the factory MAF sensor, but feature two different diameters and profiles. As mentioned above, the Street housing is designed to provide factory-spec fuel trims WITHOUT any tuning whatsoever. The Race housing allows a 50% larger volume of air in comparison to the Street housing, which is why a tune IS required. This larger volume of airflow reduces pumping loss and creates an unrestricted air path to feed the MAF housing with ambient temperature air.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCustomers can switch between MAF housings without having to buy another intake system by purchasing our \u003ca href=\"https:\/\/prlmotorsports.com\/civicxshortramtocoldair.aspx\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/prlmotorsports.com\/civicxshortramtocoldair.aspx\"\u003eMAF Housing Conversion Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCustomers can convert to a Short Ram Intake with our \u003ca href=\"https:\/\/prlmotorsports.com\/civicxcoldairtoshortram-1-1-1.aspx\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/prlmotorsports.com\/civicxcoldairtoshortram-1-1-1.aspx\"\u003eShort Ram Intake Conversion Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePerformance Gains:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e15 horsepower and 12 ft\/lb torque gains in comparison to stock with Street MAF housing WITHOUT TUNE - \u003ca href=\"http:\/\/prlarmy.com\/Blog\/project-snow-white-10th-gen-si-part-2-cobra-intake\/\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/prlarmy.com\/Blog\/project-snow-white-10th-gen-si-part-2-cobra-intake\/\"\u003eRead More Here\u003c\/a\u003e!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e20 horsepower and 15 ft\/lb torque gains in comparison to stock with Race MAF housing WITH Race MAF basemap calibration on Hondata and\/or KTuner – \u003ca href=\"http:\/\/prlarmy.com\/Blog\/2016-civic-street-race-maf-housing-dyno-comparison\/\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/prlarmy.com\/Blog\/2016-civic-street-race-maf-housing-dyno-comparison\/\"\u003eRead More Here\u003c\/a\u003e!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLarger gains to be seen at higher power levels with custom tuning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"video-container\" data-mce-fragment=\"1\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/9jvDEnRSI84\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/9jvDEnRSI84\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThird Party Testing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca href=\"http:\/\/prlarmy.com\/Blog\/hondata-tests-prl-intake-performance-gains-cobra\/\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/prlarmy.com\/Blog\/hondata-tests-prl-intake-performance-gains-cobra\/\"\u003eHondata\u003c\/a\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca href=\"http:\/\/prlarmy.com\/Blog\/innovative-motorworks-1-5t-intake-testing\/\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/prlarmy.com\/Blog\/innovative-motorworks-1-5t-intake-testing\/\"\u003eInnovative MotorWorks\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBillet Aluminum MAF Housing (Anodized Black)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePRL Motorsports High Flow Oiled Cone Air Filter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(1) 4-Ply Upper Silicone Intake Hose (Race or Street)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(1) 6-Ply Lower Silicone Intake Hose\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHDPE Rotomolded Lower Intake Tube\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(4) 304 Stainless Steel Worm Clamps\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless Steel Mounting Brackets\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless Steel Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSILICONE IS ONLY AVAILABLE IN BLACK – UPPER HOSE IS DIFFERENT THAN OUR “STAGE 1” SILICONE\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/s280.photobucket.com\/user\/prlspencer\/media\/Civic%20x%20L.trim%20stock%20intake%20and%20stock%20tune_zpstsojzcon.jpg.html\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/s280.photobucket.com\/user\/prlspencer\/media\/Civic%20x%20L.trim%20stock%20intake%20and%20stock%20tune_zpstsojzcon.jpg.html\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/i280.photobucket.com\/albums\/kk200\/prlspencer\/Civic%20x%20L.trim%20stock%20intake%20and%20stock%20tune_zpstsojzcon.jpg\" border=\"0\" alt=\"photo Civic x L.trim stock intake and stock tune_zpstsojzcon.jpg\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/i280.photobucket.com\/albums\/kk200\/prlspencer\/Civic%20x%20L.trim%20stock%20intake%20and%20stock%20tune_zpstsojzcon.jpg\"\u003e\u003c\/a\u003e\u003cbr data-mce-fragment=\"1\"\u003eAbove is a graph of the long term fuel trims with the stock intake w\/ air box and factory ECU mapping, or in other words a bone-stock car.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/i280.photobucket.com\/albums\/kk200\/prlspencer\/Civic%20x%20L.trim%20PRL%20intake%20and%20stock%20tune_zpsbwehmsdl.jpg\" border=\"0\" alt=\"photo Civic x L.trim PRL intake and stock tune_zpsbwehmsdl.jpg\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/i280.photobucket.com\/albums\/kk200\/prlspencer\/Civic%20x%20L.trim%20PRL%20intake%20and%20stock%20tune_zpsbwehmsdl.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe graph of the long term fuel trims again with, but with our cold air intake (Street MAF) and factory ECU mapping.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/i280.photobucket.com\/albums\/kk200\/prlspencer\/Civic%20x%20L.trim%20PRL%20intake%20and%20Hondata%206psi%20tune_zpsho9o9lx7.jpg\" border=\"0\" alt=\"photo Civic x L.trim PRL intake and Hondata 6psi tune_zpsho9o9lx7.jpg\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/i280.photobucket.com\/albums\/kk200\/prlspencer\/Civic%20x%20L.trim%20PRL%20intake%20and%20Hondata%206psi%20tune_zpsho9o9lx7.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis is another long term fuel trim graph, but with our cold air intake (Street MAF) and +6psi Hondata off-the-shelf map.\u003cbr data-mce-fragment=\"1\"\u003eNotice how consistent and similar all of the LTFT graphs are. Each graph is within -4 LTFT.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/i280.photobucket.com\/albums\/kk200\/prlspencer\/Civic%20x%20S.trim%20stock%20intake%20and%20stock%20tune_zpsip0nzgdb.jpg\" border=\"0\" alt=\"photo Civic x S.trim stock intake and stock tune_zpsip0nzgdb.jpg\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/i280.photobucket.com\/albums\/kk200\/prlspencer\/Civic%20x%20S.trim%20stock%20intake%20and%20stock%20tune_zpsip0nzgdb.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAbove is a graph of the short term fuel trims with stock intake w\/ air box and factory ECU mapping (stock car).\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/s280.photobucket.com\/user\/prlspencer\/media\/Civic%20x%20S.trim%20PRL%20intake%20and%20stock%20tune_zps7bindvoz.jpg.html\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/s280.photobucket.com\/user\/prlspencer\/media\/Civic%20x%20S.trim%20PRL%20intake%20and%20stock%20tune_zps7bindvoz.jpg.html\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/i280.photobucket.com\/albums\/kk200\/prlspencer\/Civic%20x%20S.trim%20PRL%20intake%20and%20stock%20tune_zps7bindvoz.jpg\" border=\"0\" alt=\"photo Civic x S.trim PRL intake and stock tune_zps7bindvoz.jpg\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/i280.photobucket.com\/albums\/kk200\/prlspencer\/Civic%20x%20S.trim%20PRL%20intake%20and%20stock%20tune_zps7bindvoz.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/a\u003eHere is a short term fuel trim graph with our cold air intake (Street MAF) and factory ECU mapping.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/s280.photobucket.com\/user\/prlspencer\/media\/Civic%20x%20S.trim%20PRL%20intake%20and%20Hondata%206psi%20tune_zpsxw60sjel.jpg.html\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/s280.photobucket.com\/user\/prlspencer\/media\/Civic%20x%20S.trim%20PRL%20intake%20and%20Hondata%206psi%20tune_zpsxw60sjel.jpg.html\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/i280.photobucket.com\/albums\/kk200\/prlspencer\/Civic%20x%20S.trim%20PRL%20intake%20and%20Hondata%206psi%20tune_zpsxw60sjel.jpg\" border=\"0\" alt=\"photo Civic x S.trim PRL intake and Hondata 6psi tune_zpsxw60sjel.jpg\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/i280.photobucket.com\/albums\/kk200\/prlspencer\/Civic%20x%20S.trim%20PRL%20intake%20and%20Hondata%206psi%20tune_zpsxw60sjel.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/a\u003eThis is another graph of the short term fuel trims with our cold air intake (Street MAF) and +6psi Hondata off-the-shelf-map. All of the STFT graphs display identical curves and consistency.\u003c\/span\u003e\u003c\/div\u003e","brand":"PRL Motorsports","offers":[{"title":"Street","offer_id":39395286974563,"sku":"PRL-HC10-INT-CAI-A","price":954.96,"currency_code":"NZD","in_stock":true},{"title":"Race","offer_id":39395287007331,"sku":"PRL-HC10-INT-CAI-C","price":954.96,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/StreetMAFFrontFullNOLogo.jpg?v=1622579860"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/collections\/Easter-sale-card-1.jpg?v=1774929461","url":"https:\/\/www.speedscience.co.nz\/collections\/easter-sale-intake-systems.oembed","provider":"Speed Science","version":"1.0","type":"link"}