{"title":"Crx EF (non vtec)","description":"","products":[{"product_id":"skunk2-lower-control-camber-arm-bushes","title":"Skunk2 Replacement Lower Control Arm Bushes (Old Style)","description":"\n\u003cp\u003eSkunk2's redesigned, low-deflection, polyurethane bushings are available separately and are compatible with all Skunk2 Rear Lower Control Arms and Rear Camber Kits.\u003c\/p\u003e\n\u003cp\u003eImportant: Purchase includes two bushing halves. Each Rear Lower Control Arm and Rear Camber Kit mounting point requires two bushing halves.\u003c\/p\u003e\n\u003cp\u003eGenuine Skunk2 polyurethane bushings act as bearings for quicker response and a more positive feel when compared to other manufacturers' bushings. Tearing and unseating problems normally associated with other fixed rubber bushings are eliminated by allowing the arm to rotate freely about the bushings. Fewer grooves within the inner diameter as well as special, radius-cut backsides help them last longer and avoid tearing and unseating. Thanks to the new \u003cspan id=\"\" class=\"\"\u003edesign, bushing failures have been eliminated.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e Compatible with all Skunk2 Rear Lower Control Arms and Rear Camber Kits.\u003cbr\u003e Purchase includes two bushing halves.\u003cbr\u003e When replacing worn bushings be sure to retain the metal sleeve that installs between the bushings, that is a re-usable piece that we do not currently offer a replacement for.\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175288397923,"sku":"skk916-05-0505","price":33.93,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/916-05-0505_1.jpg?v=1569190299"},{"product_id":"skunk2-billet-battery-tie-down-hard-anodized","title":"Skunk2 Billet Battery Tie Down - Hard Anodized","description":"\n\u003cp\u003eSkunk2's Fine Tuning products and accessories, like its Billet Battery Tie downs, compatible with the '92-'00 Civic and '94-'01 Integra, help put the finishing touches onto your vehicle you work so hard to make perform well.\u003c\/p\u003e\n\u003cp\u003eConsistent with Skunk2's racing heritage and high-performance parts manufacturing practices, each Billet Battery Tie down is precision CNC machined from high-quality, 6061 billet aluminium and features a durable, hard anodized finish.\u003c\/p\u003e\n\u003cp\u003eSkunk2's Billet Battery Tie downs are also compatible with your vehicle's original mounts as well as with OEM and aftermarket batteries and feature laser-etched Skunk2 logos for the ultimate finishing touch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003cbr\u003e\u003c\/strong\u003eEF\/DA owners must be using smaller sized NS60 battery.\u003cbr\u003eCompatible with OEM mounts as well as OEM and many aftermarket batteries.\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":39608103305315,"sku":"skk625-05-0060","price":82.23,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/625-05-0060_1.jpg?v=1569190299"},{"product_id":"skunk2-radiator-cap-ef-da-bb1-8-prelude-alloy-radiators","title":"Skunk2 Radiator Cap - EF\/DA\/Alloy Radiators","description":"\u003cp\u003eSkunk2's Fine Tuning products and accessories, like its high-pressure Radiator Caps, help put the finishing touches onto your vehicle you work so hard to make perform well. Skunk2 Radiator Caps increase internal radiator pressure, which results in a higher coolant boiling point and a more efficient cooling system. Skunk2 Radiator Caps feature an open valve pressure of 1.3 kg\/cm that's .2kg\/cm higher than most OEM radiator caps. High-pressure radiator caps like Skunk2's demonstrate their effectiveness under high-load conditions on both race cars and street cars alike. Skunk2's high-pressure Radiator Cap Type A fits '88-'91 Civics, '90-'93 Integras, Most '92-'01 Preludes, and most Mazdas, Mitsubishis, Nissans, and Subarus, as well as most aftermarket radiators.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePerfect for most aftermarket radiators.\u003c\/li\u003e\n\u003cli\u003eIncrease your radiator pressure and cooling system boiling point for unsurpassed efficiency.\u003c\/li\u003e\n\u003cli\u003ePair with Skunk2 Silicone Radiator Hoses for the ultimate cooling system.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175295508579,"sku":"skk359-99-0020","price":79.67,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/359-99-0020_1.jpg?v=1569190299"},{"product_id":"skunk2-rear-camber-kit-ef-da-eg-ek-dc","title":"Skunk2 Rear Camber Kit - EF\/DA\/EG\/EK\/DC","description":"\n\u003cp\u003eSkunk2's Rear Camber Kit for all 88-00 Civics and 90-01 Integras, including CRXs and del Sols, is based on the same adjustable camber kit technology the company's been using on its own race cars for more than a decade. Skunk2's Rear Camber Kit is a must-have for enthusiasts looking to fine-tune their suspension or correct negative camber introduced from lowered ride heights. With the ability to adjust both positive and negative camber, enthusiasts can reduce abnormal tire wear and significantly improve handling and overall stability. Each Skunk2 Rear Camber Kit is constructed of forged alloy steel, plated for exceptional corrosion resistance, and aircraft quality, 7075 aluminum. Each kit includes Skunk2's industry-leading, low-deflection polyurethane bushings that act as bearings to allow for smooth pivoting without the harsh side effects of spherical bearings. Unlike steel and rubber bushings found in lesser quality camber kits, Skunk2's polyurethane bushings won't tear or break free.\u003c\/p\u003e\n\u003cp\u003eSkunk2's Camber Kits are the number one choice of many professional race teams, including Honda's own factory road race cars, since 1997. And since 1995, Skunk2 Racing has been leading the industry with its fully adjustable Camber Kits. To accommodate enthusiasts' needs, Skunk2 made a significant change in 1998 by adding an oversized, rectangular-shaped top mount to its Front Camber Kits for increased positive adjustment. In 2000, Skunk2 pioneered the use of one-piece forged ball joints. And in 2004, Skunk2 introduced its patent-pending Pro Series Ball Joints, a design that, today, sets the standard for all other camber kits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold in pairs.\u003c\/li\u003e\n\u003cli\u003eQuickly adjust rear camber without disconnecting the arm from the chassis.\u003c\/li\u003e\n\u003cli\u003e*Warning* When replacing worn bushings be sure to retain the metal sleeve that installs between the bushings, that is a re-usable piece that we do not currently offer a replacement for.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175295737955,"sku":"skk516-05-0500","price":382.19,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/3516-05-0500_1.jpg?v=1569190299"},{"product_id":"skunk2-pro-front-camber-kit-ef","title":"Skunk2 Pro Front Camber Kit - EF","description":"\u003cp\u003e\u003cstrong\u003eSkunk2 Pro Front Camber Kit - EF\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSkunk2 designed its Pro Series Front Camber Kit for the ’88-’91 Civic\/Crx with specially engineered A-arms and ball joints that allow for maximum positive camber adjustment in a low-profile design. Enthusiasts who are serious about performance can now correct almost all abnormal tire wear due to negative camber and increase high-speed stability.\u003c\/p\u003e\n\u003cp\u003ePro Series Camber Kits feature high-quality rubber bushings, heavy duty mounting anchors, and Skunk2’s all-new, one-piece, forged Pro Series Ball Joints, which feature low-profile top plates for additional clearance between themselves and the shock towers, higher clamping loads for no-slip performance, and a unique design that allows for maximum adjustability. \u003cstrong\u003eSkunk2 ‘s cadmium-plated, Pro Series Ball Joints can also be adjusted from the bottom up, which allows for quicker and easier adjustments—especially on lowered vehicles with shortened shock bodies.\u003c\/strong\u003e In addition to improved ride characteristics and reduced tire wear on lowered vehicles, Skunk2's proprietary design helps reduce structural fatigue and failure commonly associated with other camber adjustment kits.\u003c\/p\u003e\n\u003cp\u003eSkunk2’s Camber Kits are the number one choice of many professional race teams, including Honda’s own factory road race cars, since 1997. And since 1995, Skunk2 has been leading the industry with its fully adjustable Camber Kits. To accommodate enthusiasts’ needs, Skunk2 made a significant change in 1998 by adding an oversized, rectangular-shaped top mount to its Front Camber Kits for increased positive adjustment. In 2000, Skunk2 pioneered the use of one-piece, forged ball joints. And in 2004, Skunk2 introduced its patent-pending Pro Series Ball Joints—a design that, today, sets the standard for all other camber kits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold in pairs.\u003c\/li\u003e\n\u003cli\u003ePro Series Front Camber Kits feature the most innovative, durable ball joints available. No other ball joint lasts as long, performs as well, or offers as much clearance for dramatically lowered vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"951\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/D6So7DjxBhw\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175296622691,"sku":"skk516-05-5660","price":513.68,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/516-05-5660_1.jpg?v=1569190299"},{"product_id":"skunk2-radiator-hose-kit-eg-ek-d-series","title":"Skunk2 Radiator Hose Kit - EG\/EK\/DC D Series","description":"\n\u003cp\u003eSkunk2's Fine Tuning products and accessories, like its Silicone Radiator Hoses for the 92-00 Civic, help put the finishing touches onto your vehicle you work so hard to make perform well. Liven up your engine bay and give yourself some peace of mind while you're at it with one of Skunk2's Silicone Radiator Hose Kits. Unlike OEM rubber cooling hoses that must be periodically replaced because of deterioration caused by heat and pressure, Skunk2 silicone hoses will outlast the life of your engine. And with their glossy black finish, red interior, and Skunk2 logo, they'll look good while doing it.\u003c\/p\u003e\n\u003cp\u003eSkunk2 Silicone Radiator Hoses are handmade using high-quality, automotive-grade silicone and feature cutting-edge, multi-layer, embedded fiber linings that'll resist even the most abusive engine temperatures and pressures. Each application has been test-fitted for accuracy, as well as for an OEM fit, and has been subjected to rigorous tests and inspections to ensure years of worry-free operation. All Skunk2 radiator hoses are compatible with each vehicle's OEM water housings, radiator necks, and OEM hose clamps. You're going to have to replace those OEM radiator hoses sooner or later. Do your engine bay a favor and upgrade it with a Skunk2 Silicone Radiator Hose Kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePair with a Skunk2 Radiator Cap for increases internal radiator pressure, which results in a higher coolant boiling point and a more efficient cooling system.\u003c\/li\u003e\n\u003cli\u003eNot compatible with B, H\/F, or K-series engine swaps.\u003c\/li\u003e\n\u003cli\u003eFor B18C engine swap applications, see part number 629-05-0003.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":39608102453347,"sku":"skk629-05-0006","price":233.49,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/629-05-0006_1.jpg?v=1569190300"},{"product_id":"skunk2-camber-kit-ball-joint-ef-da-cl7-9","title":"Skunk2 Camber Kit Ball Joint EF\/DA\/CL7\u00269","description":"\u003cp\u003e\u003cstrong\u003eSkunk2 Camber Kit Ball Joint EF\/DA\/CL7\u0026amp;9\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSkunk2 is synonymous with innovation, so it's no surprise that its engineers took the company's highly successful and widely copied Pro Series Ball Joints and made them even better. Pro Series Ball Joints V2.0, which are compatible with '88-'91 Civic, '90-'93 Integra, and '04-'08 TSX Pro Series Front Camber Kits, may look similar to their predecessor on the surface, but they aren't.\u003c\/p\u003e\n\u003cp\u003ePro Series Ball Joints V2.0 help alleviate typical clearance problems normally associated with lowered cars and aftermarket, adjustable ball joints. Typically, the front, upper A-arms ball joints range of motion maxes out on lowered cars, causing the suspension arm to bind at the joint.\u003c\/p\u003e\n\u003cp\u003eSkunk2's Pro Series Ball Joints V2.0 alleviate this problem thanks to a 3mm larger diameter pivot ball and a notched housing that allows for increased range of motion and increased strength. A high quality Teflon liner is also used to surround the ball joint for smoother operation, while the rubber boot that houses the ball joint now utilizes a crimped design that allows for the increased angle, adding both durability and longevity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003cbr\u003e\u003c\/strong\u003ePro Series Ball Joints are sold individually.\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175298064483,"sku":"skk916-05-5660","price":124.56,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/916-05-5660_1.jpg?v=1569190300"},{"product_id":"plm-adjustable-shifter-b-d-series","title":"PLM Adjustable Shifter B\/D Series","description":"\n\n\u003cp\u003eThe Private Label Mfg Fully Adjustable shifter is constructed with high quality alloy steel for maximum durability and reliability to ensure the shifter will last. The added weight of the shifter results in smoother and more positive shifting with the ergonomic design that just falls into your hands, to the very first ultra-smooth shift.\u003c\/p\u003e\n\u003cp\u003eThe shifter was designed to have an adjustable ratio as the stock shifter to an more aggressive feel. The shifter is fully height adjustable to accommodate each drivers desired position, as every driver is different. The shifter certainly does not look stock, but the shift feel and throw can be adjusted like the stock shifter. Each short shifter features a non-binding sealed bearing and a low friction coating that ensures smooth and precise shifting, even under the harshest driving conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-part design for easier installation\u003c\/li\u003e\n\u003cli\u003eFits any Honda\/Acura thread-pitch knob\u003c\/li\u003e\n\u003cli\u003eAdjustable handle compensates for small-diameter racing steering wheels\u003c\/li\u003e\n\u003cli\u003eRevised bushings for even smoother shifting\u003c\/li\u003e\n\u003cli\u003eStandard Honda\/Acura 10x1.5mm thread pitch and shift knob applications\u003c\/li\u003e\n\u003cli\u003eMade from high grade stainless steel \u0026amp; billet aluminium\u003c\/li\u003e\n\u003cli\u003eMachine spun stainless finish\u003c\/li\u003e\n\u003cli\u003eShift Knob not included\u003c\/li\u003e\n\u003cli\u003eAll necessary allen keys for adjusting included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLM","offers":[{"title":"Default Title","offer_id":29175305633891,"sku":"PLM-SHIFTER-B\/D","price":306.76,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/PLM-SHIFTER-B-D-2T.jpg?v=1582165761"},{"product_id":"k-tuned-battery-tie-down-ef-eg-ek-da-dc","title":"K-Tuned Battery Tie-Down - EF\/EG\/EK\/DA\/DC","description":"\n\u003cp\u003eBattery tie downs for Hondas have been available in the aftermarket for more than a decade. Even now, there are still a handful of companies making these but they all seem to be missing something... Nobody ever includes the hold down rods or new hardware for installation. So, unfortunately, you get a new billet top bracket and install it with the old, original and rusty hardware. This just doesn't make much sense. Add that most of these brackets are very cheap and unattractive.\u003c\/p\u003e\n\u003cp\u003eIn true K-Tuned fashion, they have designed the best and most complete battery tie down kits available. K-Tuned doesn't just sell the precision CNC cut, 6061 billet bracket with their signature logo on it. They went a few steps further and have designed 100% complete kits that also include 6061 billet hold down rods with stainless tray hooks and stainless hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Will only work with narrow NS10 sized battery.\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":29175311138915,"sku":"BTD-UNV-BLK","price":139.35,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/BTD-UNV-BLK_1.jpg?v=1580873940"},{"product_id":"hard-race-front-roll-centre-adjusters-ef-eg-ek-dc","title":"Hardrace Front Roll Centre Adjusters - EF\/EG\/EK\/DC","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003e*Sold As A Set*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBy installing the HARDRACE Roll-Center Adjusters, it will correct the suspension geometry of a lowered car, putting the control arms back closer to its original position, resulting in increased steering response and stability whilst eliminating bump steer\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDecreases body roll\u003c\/li\u003e\n\u003cli\u003eImproves tire contact patch with the road\u003c\/li\u003e\n\u003cli\u003eIncreases steering wheel responsiveness\u003c\/li\u003e\n\u003cli\u003eEnables increased cornering force\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":29175316250723,"sku":"hrQ1137","price":302.63,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/2014918939579Y39M57ZU.jpg?v=1580874024"},{"product_id":"hard-race-rear-trailing-arm-bushes-honda-hardened-rubber","title":"Hard Race Rear Trailing Arm Bushes - EF\/EG\/EK\/DA\/DC - Hardened Rubber","description":"\n\u003cp\u003e\u003cstrong\u003e*Sold As A Kit*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e80mm Fit - EF\/EG\/EK\/DC and many other Honda models\u003c\/p\u003e\n\u003cp\u003e85mm Fit - DA\u003c\/p\u003e\n\u003cp\u003eFirmer, longer-lasting and cheaper than OEM and many aftermarket options. It's a no brainer!\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"80mm","offer_id":29175316578403,"sku":"hr6106","price":180.64,"currency_code":"NZD","in_stock":true},{"title":"85mm","offer_id":42846497472611,"sku":"hr6385","price":225.22,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/6106.jpg?v=1580874034"},{"product_id":"hard-race-strut-mount-bushes-ef-da-eg-ek-dc","title":"Hardrace Strut Mount Bushes - EF\/DA\/EG\/EK\/DC","description":"\n\u003cp\u003e\u003cstrong\u003eSold in 4's - enough for front or rear - 2 kits required for complete car.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHard Race strut mount bushes are specially developed thermoplastic bushings made with high strength, anti-crack rubber material. Enjoy improved steering response and driving suspension feel.\u003c\/p\u003e\n\u003cp\u003e150% increase in oem rubber stiffness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReduces vibration\u003c\/li\u003e\n\u003cli\u003eProvides stability\u003c\/li\u003e\n\u003cli\u003eIncrease steering response\u003c\/li\u003e\n\u003cli\u003eOEM direct replacement\u003c\/li\u003e\n\u003cli\u003eRegular greasing not required\u003c\/li\u003e\n\u003cli\u003eNo noise or squeaks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":29175317561443,"sku":"hr6359","price":48.09,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/2014449549R5F4DZ.jpg?v=1580874051"},{"product_id":"hard-race-rear-camber-arm-bushes-ef-da-eg-ek-dc-rubber","title":"Hardrace Rear Camber Arm Bushes - EF\/DA\/EG\/EK\/DC","description":"\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.5;\"\u003e*Sold As A Set*\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 1.5;\"\u003eHard Race suspension bushes are hardened rubber bushings made with high strength, anti-crack rubber material. Enjoy improved steering response and driving suspension feel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e150% increase in oem rubber stiffness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReduces vibration\u003c\/li\u003e\n\u003cli\u003eProvides stability\u003c\/li\u003e\n\u003cli\u003eIncrease steering response\u003c\/li\u003e\n\u003cli\u003eOEM direct replacement\u003c\/li\u003e\n\u003cli\u003eRegular greasing not required\u003c\/li\u003e\n\u003cli\u003eNo noise or squeaks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":29175318315107,"sku":"hr6104","price":100.88,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/2014918954409A54P40NK.jpg?v=1580874063"},{"product_id":"blox-racing-short-shifter-single-bend-ef-eg-ek-da","title":"BLOX Racing Short Shifter - Single bend, EF\/EG\/EK\/DA","description":"\u003cp\u003e\u003cspan\u003eBLOX Racing billet short shifters are made from high quality and high strength alloy steel.  Each short shifter features a non-binding bearing that ensures smooth and precise shifting, even under the harshest driving conditions.  Overall performance is enhanced when combined with a BLOX Racing shift knob. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eVEHICLE APPLICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e88-91 Civic\/CRX\u003c\/li\u003e\n\u003cli\u003e92-95 Civic\u003c\/li\u003e\n\u003cli\u003e96-00 Civic\u003c\/li\u003e\n\u003cli\u003e90-93 Integra\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BLOX Racing","offers":[{"title":"Default Title","offer_id":29175320445027,"sku":"BXAC-00300","price":287.91,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/files\/97122c7d2f261df5235c60b36286cbcb.jpg?v=1755131485"},{"product_id":"blox-racing-test-pipes","title":"BLOX Racing Adjustable Test Pipes - EF\/EG\/DA\/DC\/DB\/EK","description":"\u003cp class=\"p1\"\u003eBLOX Racing test pipes are constructed out of T304 stainless steel and are great alternatives for the restrictive factory catalytic converter.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eEach test pipe is TIG-welded and features thick flanges and significantly increases exhaust flow.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe Honda test pipes feature slip-fit piping that offer adjustability and versatility in clocking angles. This unique feature helps accommodate the many different header lengths and collector angles that are currently on the market.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eOverall Length w\/ Mid Section Installed - 16.75\"\u003cbr\u003eOverall Length w\/o Mid Section Installed - 11.75\" \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eSupplied with adonut gasket, MLS gasket and hardware.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eFOR RACE USE ONLY.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 class=\"p1\"\u003eVEHICLE APPLICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e88-91 Civic\/CRX\u003c\/li\u003e\n\u003cli\u003e92-95 Civic\u003c\/li\u003e\n\u003cli\u003e92-97 Delsol\u003c\/li\u003e\n\u003cli\u003e96-00 Civic\u003c\/li\u003e\n\u003cli\u003e90-93 Integra\u003c\/li\u003e\n\u003cli\u003e94-01 Integra\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BLOX Racing","offers":[{"title":"2.25 Inch","offer_id":29175329390691,"sku":"BXEX-20100","price":296.14,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/BXEX-20100_1.jpg?v=1580787387"},{"product_id":"skunk2-alpha-radiator-ef-civic-crx-full-size","title":"Skunk2 Alpha Radiator - EF Civic\/CRX Full Size","description":"\n\u003cp\u003eSkunk2s all-aluminium, full-size Alpha Series Radiator for the 88-91 Civic\/CRX is a direct-fit upgrade designed to dramatically increase both cooling efficiency and engine performance. Alpha Series Radiators are manufactured from lightweight and durable aluminium, feature 100-percent brazed cores, and include polished end tanks with Skunk2's signature Alpha logo embossed along each side. Each Alpha Series Radiator features a dual-core design, high-efficiency fins for maximum cooling capabilities, and includes a genuine Skunk2 Radiator Cap for maximum performance and a premium appearance. Each Alpha Series Radiator also includes provisions for the OEM cooling fan and larger \u003cstrong\u003e1.25-inch inlets and outlets (B\/H\/K Series)\u003c\/strong\u003e, which makes it ideal for most engine swaps that utilize larger radiator hoses.\u003c\/p\u003e\n\u003cp\u003eSkunk2's commitment to producing high-quality components means that each Alpha Series Radiator meets or exceeds original equipment manufacturer standards, that each radiator may be installed without modification to the vehicle, and is compatible with OEM hoses, cooling fans, and shrouds. (Note: Some engine swap applications may require custom radiator hoses and\/or cooling fans.)\u003c\/p\u003e\n\u003cp\u003eSkunk2's Alpha Series Radiators are the perfect addition to any high-performance vehicle and are designed for the street, the track, or even OEM replacement purposes. Alpha Series Radiators are built to withstand harsh elements as well as against years of under-hood heat cycling. Each Alpha Series Radiator adheres to strict quality control standards and careful packaging, resulting in tubes and fins capable of optimal flow and efficient heat transfer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual-core design.\u003c\/li\u003e\n\u003cli\u003eIncludes Skunk2 Radiator Cap.\u003c\/li\u003e\n\u003cli\u003eFeatures 1.25-inch inlet and outlet (B\/H\/F\/K Series)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWill not fit ef8\/9 without subframe modification or traction bar fitted.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175331717219,"sku":"skk349-05-1500","price":541.98,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/alpha4.jpg?v=1569190305"},{"product_id":"asr-complete-24mm-sway-bar-kit-ef-civic-crx","title":"ASR Subframe Reinforcement Brace w\/ Swaybar - EF Civic\/Crx","description":"\u003cp\u003eASR 24mm Swaybar Kit – Honda EF Civic\/Crx\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eASR 24mm Swaybar Kit - EF Civic\/Crx\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eComplete Anti-Roll Bar and Reinforcement kit\u003c\/p\u003e\n\u003cp\u003eASR Complete subframe reinforcement brace with anti-roll bar kit for 88-91 Civic and CRX. Kit comes with 24mm 2 way adjustable anti-roll bar, endlinks and all necessary mounting hardware.\u003c\/p\u003e\n\u003cp\u003eASR subframe reinforcement brace only kit for 88-91 Civic and CRX. The brace has side brackets that anchor the brace to the spare tire well for maximum rigidity. This revolutionary design that enables you to retrofit newer style anti-rolls bars to your vehicle. The brace also serves as the perfect mounting point for different size anti-roll bars that provide you another area of tunability for setting your suspension up just the way you want.\u003c\/p\u003e\n\u003cp\u003eASR Anti-roll bar only kit features 2 position adjustable 24mm anti-roll bar and billet aluminium anti-roll bar brackets and polyurethane bushings. This anti-roll bar is direct bolt on for EF brace only kits.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ASR","offers":[{"title":"Grey","offer_id":29175332536419,"sku":"EF-RBS-02","price":959.9,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":44239837167715,"sku":"EF-RBS-02B","price":959.9,"currency_code":"NZD","in_stock":true},{"title":"Gold","offer_id":44239837200483,"sku":"EF-RBS-02G","price":959.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/ef-rbs-02.png?v=1580874303"},{"product_id":"asr-32mm-swaybar-kit-honda-ef","title":"ASR 32mm Swaybar Kit - Honda EF","description":"\u003cp\u003e\u003cstrong\u003eASR 32mm Swaybar Kit – Honda EF Civic\/Crx\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eASR 32mm Swaybar Kit - Honda EF Civic\/Crx\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eASR 32mm Anti-roll bar kit for Civic\/CRX 88-91 is designed for the serious racers. With 5 different anti-roll bar wall thickness to choose from, you can fine tune the handling of your car to any track. The Anti-roll bar is made with heat treated chromoly steel for their excellent strength to weight ratio. The brackets are designed with integrated tow points and are precision laser cut out of beefy 3\/16th steel. Aluminum swaybar arms are utilized to minimizes unsprung weight. The bearing are housed in a pillow block made in billet aluminum. The self-centering bronze bearing offers maintenance and bind free operation.\u003c\/p\u003e\n\u003cp\u003e.25\" Bar Thickness\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSubframe Brace\u003c\/strong\u003e\u003cbr\u003e\nASR subframe reinforcement brace is the only kit for 88-91 Civic and CRX. The brace has side brackets that anchor the brace to the spare tire well for maximum rigidity. This revolutionary design that enables you to retrofit newer style anti-rolls bars to your vehicle. The brace also serves as the perfect mounting point for different size anti-roll bars that provide you another area of tunability for setting your suspension up just the way you want. This Subframe reinforcement kit is compatible with the OEM Integra Type R 22-23mm, DC rear anti-roll bar and ASR 24mm EG anti-roll bar kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSway Bar\u003c\/strong\u003e\u003cbr\u003e\n32mm 3 piece hollow anti-roll bar is the ultimate anti-roll bar for your track car.\u003c\/p\u003e\n\u003cp\u003eAnti-roll bar are made with heat treated chromoly steel for their excellent strength to weight ratio.\u003c\/p\u003e\n\u003cp\u003eThe bearing are housed in a pillow block made in billet aluminium. The self-centering bronze bearing offers maintenance and bind free operation.\u003c\/p\u003e\n\u003cp\u003eThe design enables the user to do easy 5 minute track side bar swaps to suit changing conditions and the multiple adjustments holes on the arm allows for fine tuning.\u003c\/p\u003e","brand":"ASR","offers":[{"title":"0.095","offer_id":39861957951587,"sku":"EF-RS-011","price":1287.12,"currency_code":"NZD","in_stock":true},{"title":"0.120","offer_id":39861957984355,"sku":"EF-RS-012","price":1287.12,"currency_code":"NZD","in_stock":true},{"title":"0.188","offer_id":39861958017123,"sku":"EF-RS-013","price":1287.12,"currency_code":"NZD","in_stock":true},{"title":"0.250","offer_id":39861958049891,"sku":"EF-RS-014","price":1287.12,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/EF-RSR.png?v=1580874355"},{"product_id":"asr-subframe-brace-honda-ef-civic-crx","title":"ASR Subframe Brace - Honda EF Civic\/Crx","description":"\u003cp\u003eASR Rear Subframe Brace – Honda EF Civic\/Crx\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eASR Subframe Brace - Honda EF Civic\/Crx\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned in 2004, the ASR rear subframe brace has come a long way from its first introduction into the market. Many design improvements have been made over the years. Others have imitated but you can not replicate quality!\u003c\/p\u003e\n\u003cp\u003eWe only use U.S.A. made 6061-T6 grade aluminum when manufacturing our subframe brace. The subframe brace is used to reinforce the thin oem sheet metal rear subframe on Honda\/Acura vehicles. This brace was designed with proper fitment in mind and each brace is quality checked.\u003c\/p\u003e\n\u003cp\u003eThis brace is a must have when upgrading to a larger diameter anti-sway bar to greatly reduce the chance of rear lower subframe \"tear out\".\u003c\/p\u003e\n\u003cp\u003eMany experience the hassle of installing \"fake ASR\" or other branded rear subframe braces on their vehicles that simply do not fit, but we can assure you our product is machined with precise tolerances to guarantee fitment.\u003c\/p\u003e\n\u003cp\u003eASR subframe brace is a direct bolt-on part and is compatible with these anti rear sway bars:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eASR 24mm swaybar\u003c\/li\u003e\n\u003cli\u003eASR 1\" hollow swaybar\u003c\/li\u003e\n\u003cli\u003eASR 32mm hollow bar\u003c\/li\u003e\n\u003cli\u003eOEM Integra\/Civic Type R 22-23mm sway bar\u003c\/li\u003e\n\u003cli\u003eMugen 26mm swaybar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eContents:\u003c\/p\u003e\n\u003cp\u003e1 - ASR subframe reinforcement brace\u003cbr\u003e\n1 - ASR subframe brace hardware kit\u003cbr\u003e\n1 - Instructions\u003c\/p\u003e\n\u003cp\u003eINSTALLATION NOTES:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0996\/9462\/files\/EG_instructions.pdf?15228093562158792449\"\u003eClick Here For Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBEWARE OF FAKES - \u003ca href=\"http:\/\/www.asrparts.com\/buyer-warning-fake-asr-subframe-braces-on-the-loose\/\"\u003eClick here for details.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/youtu.be\/oQfKYnU8PQc\u003c\/p\u003e","brand":"ASR","offers":[{"title":"Grey","offer_id":29175333552227,"sku":"EF-RB-01","price":460.74,"currency_code":"NZD","in_stock":true},{"title":"Gold","offer_id":42846489411683,"sku":"EF-RB-01G","price":460.74,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":44239665561699,"sku":"EF-RB-01B","price":460.74,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/EF-RB-01.png?v=1580874369"},{"product_id":"asr-adjustable-swaybar-endlinks-honda-ef-eg-ek-da-dc","title":"ASR Adjustable Swaybar Endlinks - EF\/EG\/EK\/DA\/DC","description":"\u003cp\u003eASR High-Performance PTFE lined adjustable end-links is very helpful when corner weighting your vehicle, as this allows the user to remove any preload from a standard or aftermarket anti-roll bars.\u003c\/p\u003e\n\u003cp\u003eThe shorter collapsed overall length also regain proper anti-roll bar geometry on lowered vehicles. The PTFE coated rod ends ensure squeak and rattle-free operation.\u003c\/p\u003e","brand":"ASR","offers":[{"title":"Default Title","offer_id":29175342530659,"sku":"EK-RE-01","price":199.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Endlinks.png?v=1580874485"},{"product_id":"pci-aluminium-side-skirts-ef-3dr","title":"PCI Aluminium Side Skirts - EF Civic 3dr","description":"\n\u003cp\u003ePro Car Innovations Race Spec Side Skirts are a must for those looking to improve the aerodynamic efficiency of their car. PCI’s Race Spec Side Skirts have been proven to be highly effective when used in combination of other aero parts like front splitters, under trays, wings, rear diffusers.\u003c\/p\u003e\n\u003cp\u003eManufactured by PCI. Developed and tested on our own Famous #65 \u0026amp; #66 DC2 JDM Integra Racecars – Race tested – Race Proven – The finishing touch to your P1 Spec Aero package Finished in Black Powder coat.\u003c\/p\u003e\n\u003cp\u003eAll mounting hardware supplied.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComputer designed\u003c\/li\u003e\n\u003cli\u003e.125” steel laser cut and powder coated mounting brackets\u003c\/li\u003e\n\u003cli\u003eSide skirts are CNC laser cut from .065” aluminium\u003c\/li\u003e\n\u003cli\u003eCNC machined aero mounting washers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pro Car Innovations","offers":[{"title":"4\"","offer_id":29175345741923,"sku":"SS-EF-4","price":707.69,"currency_code":"NZD","in_stock":true},{"title":"5\"","offer_id":29175345774691,"sku":"SS-EF-5","price":762.13,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/SM-EF-5-11.jpg?v=1580874560"},{"product_id":"hc-racing-front-lip-honda-ef-crx-88-89-pfacelift-type-2","title":"HC Racing Front Lip - EF CRX 88-89 P'Facelift Type 2","description":"\n\u003cp\u003eQuality, great looking lip available in durable polyurethane construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e No aftermarket exterior part fits 100% like factory. Some small margin for error is expected and deemed acceptable.\u003c\/p\u003e","brand":"HC Racing","offers":[{"title":"Default Title","offer_id":29175349084259,"sku":"NEB02-35E031","price":208.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/files\/NEB02-35E031.png?v=1762728186"},{"product_id":"blox-racing-harness-bar","title":"Blox Racing Harness Bar","description":"\u003cp\u003eBLOX Racing is proud to introduce its harness bar, available in black and silver. This harness bar is designed to help route and attach seat belt harnesses safely and securely through existing mounting locations. The harness bar also helps increase chassis rigidity by tying together the vehicle's B-Pillar points.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eBLOX Racing harness bars measure 47 Inches (120 cm) in length and are constructed of high quality, lightweight steel and come with necessary mounting hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Applications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e93-01 Integra DC2\u003c\/li\u003e\n\u003cli\u003e02-06 Integra DC5\u003c\/li\u003e\n\u003cli\u003e88-91 Honda CRX (not civic)\u003c\/li\u003e\n\u003cli\u003e92-00 Honda Civic EG\/EK 3dr\u003c\/li\u003e\n\u003cli\u003e01-06 Honda Civic Si\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Speed Science is not liable for any injury relating to the use of this harness bar.\u003c\/p\u003e","brand":"BLOX Racing","offers":[{"title":"Black","offer_id":29175351214179,"sku":"BXAC-10047-BK","price":697.6,"currency_code":"NZD","in_stock":true},{"title":"Silver","offer_id":29175351246947,"sku":"BXAC-10047-SI","price":697.6,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/harness-bar-2-500x500.jpg?v=1580787660"},{"product_id":"hard-race-rear-camber-arms-ef-da-eg-dc-ek-extreme-negative","title":"Hardrace Rear Camber Arms - EF\/EG\/EK\/DA\/DC Extreme Negative","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003e*Sold As A Set*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHard Race camber arms are made with hardened steel and upgraded rubber bushes. Whether wanting to reduce tyre wear, or dial in more camber for circuit duty, these Hard Race camber arms will perform.\u003c\/p\u003e\n\u003cp\u003eHard Race bushes are 150% firmer than OEM.\u003c\/p\u003e\n\u003cp\u003eThese Extreme Negative arms are designed for those wanting in excess of 4 degrees negative camber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eED process and painting for the highest durability\u003c\/li\u003e\n\u003cli\u003eEquipped with premium quality bushings\u003c\/li\u003e\n\u003cli\u003eSuperior strength and durability\u003c\/li\u003e\n\u003cli\u003eOE direct replacement\u003c\/li\u003e\n\u003cli\u003eDramatically improving handling performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e Hard Race has an international reputation for manufacturing quality suspension components and is recognised by certifiers nationwide.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":29175354064995,"sku":"hr7559","price":211.14,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/201463015234315I23F43FV.jpg?v=1580874786"},{"product_id":"skunk2-lowering-springs-ef-civic-crx","title":"Skunk2 Lowering Springs - EF Civic\/Crx","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e*Set Of 4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCorner faster, stop quicker, and improve the look of your vehicle with Skunk2's legendary Lowering Springs.Skunk2 Lowering Springs for the ’88-’91 Civic and CRX are designed to dramatically improve handling performance and driver feel through significantly increased cornering grip and reduced body roll.\u003c\/p\u003e\n\u003cp\u003eWhat’s more, Skunk2 Lowering Springs also help counteract squatting under acceleration as well as nose-diving while braking. All Skunk2 Lowering Springs are CNC-wound using the highest quality SAE 9254V spring steel, shot-peen stress relieved, and corrosion-protected thanks to powder coating and specialized phosphate treating processes.\u003c\/p\u003e\n\u003cp\u003eThe results are a lower centre of gravity and race car-like handling, yet smooth, comfortable ride characteristics—the perfect balance between \u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003eperformance and comfort. Skunk2 Lowering Springs are compatible with OEM or aftermarket shock absorbers and look great on vehicles with stock or aftermarket wheels. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003eWhen applicable, Skunk2 Lowering Springs should be paired with Skunk2 Sport Shocks and other fine Skunk2 suspension components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"product-note-intro\"\u003eTechnical Info:\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003eFront Spring Rate (Tender \/ Main): 257 lb-in \/ 559 lb-in\u003cbr\u003eRear Spring Rate (Tender \/ Main): 112 lb-in \/ 485 lb-in\u003cbr\u003eDrop (Front \/ Rear): 2.25” \/ 2.00”\u003cbr\u003eNote: 1 lb-in = 0.0179 kg\/mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRear springs may be uncaptive on OEM shocks - this is not a problem when using Skunk2 Sport Shocks.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175357898851,"sku":"skk519-05-1650","price":513.68,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/519-05-1650.jpg?v=1569190309"},{"product_id":"skunk2-ultra-lca-spherical-upgrade-kit","title":"Skunk2 Ultra LCA Spherical Upgrade Kit","description":"\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eSkunk2 Spherical Bearing Upgrade - Ultra Series LCA\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-description\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eSkunk2 is proud to introduce its Spherical Bearing Upgrade for the Alpha and Ultra Series Lower Control Arms. Designed for the hardcore racer and discerning enthusiast, these high load steel Spherical Bearing maintain accurate suspension geometry under aggressive driving. The bushing change can be done in minutes with basic tools.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #000000;\"\u003ePurchase Includes:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: #000000;\"\u003e (2) Spherical Bearings\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #000000;\"\u003e (4) Aluminium Spacers - (One for each side of the bearings)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #000000;\"\u003e (4) C - Clips\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"c-tb-box\"\u003e\u003c\/div\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":39608101863523,"sku":"skk542-99-0100","price":253.98,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/sphearical_bearing_2.jpg?v=1569190309"},{"product_id":"skunk2-alpha-headers-d-series","title":"Skunk2 Alpha Headers - D Series","description":"\n\u003cp\u003eSkunk2 is proud to announce its all-new Alpha Series Header for the Honda D-Series engines. Patterned after our already popular and dyno-proven MegaPower Headers, which have been used by leading, competitive race teams for years, Skunk2's Alpha Series Header employs many of the same design characteristics and technology. Our decision to produce the Alpha Series Header was driven by our desire to make our race-proven design more affordable and accessible to everyday enthusiasts. New manufacturing techniques allow us to do so at a lower overall cost, making race-winning header technology available to everyone. Skunk2's Alpha Series Header for VTEC and non-VTEC D-series engines offers Skunk2 performance, industry-leading customer service, and a full warranty policy, all at a price \u003cspan id=\"xs-ts\" class=\"xs-ts\"\u003ecomparable to lesser budget-minded headers. Unlike the budget-minded headers, though, only Skunk2 Alpha Series Headers ensure precise fitment and the peace of mind of knowing that a Skunk2 representative is just a phone call or email away.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAll Skunk2 Alpha headers are designed and engineered to maximize exhaust flow and increase both horsepower and torque throughout the powerband. The unique design is the result of more than a decade of racing experience coupled with computerized modeling and extensive dyno testing. \u003cstrong\u003eEach Skunk2 Alpha Series Header features equal-length, sequentially paired, stepped primaries in a 4-2-1 tri-Y design that terminates with True Merged Collector with a 2.5-inch outlet\u003c\/strong\u003e. Skunk2's Alpha Header also include 02 bungs for OEM and aftermarket sensors. Each header is constructed from stainless steel with mandrel-bent tubing for strength, corrosion resistance and durability. The Skunk2 Alpha D-Series header also includes a donut gasket and a weld on exhaust flange, this included flange can be utilized as an option to weld the Alpha Header to an aftermarket exhaust.\u003c\/p\u003e\n\u003cp\u003eThese features, paired with Skunk2's unique design specs, provide an extremely broad powerband that's applicable to a wide range of engine sizes and configurations. Alpha Series Headers also feature specific sized primary tubes to achieve optimum overall and peak power. By sizing the primary tubes' diameter, Skunk2 is able to maintain the highest possible exhaust gas speed throughout the header, which improves mid-range power and throttle response significantly. Skunk2's Alpha Series Header provides the perfect combination of top-end power without sacrificing mid-range performance or throttle response. The Alpha Header will pair up perfectly with the Kraftwerks D-Series Supercharger Kit., and has all the clearance needed for a great fit.\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175360225379,"sku":"skk412-05-1970","price":1015.77,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/files\/Untitled-1_0000_412-05-1970_1.jpg?v=1731272343"},{"product_id":"k-tuned-k-swap-conversion-harness-ef-civic-crx","title":"K-Tuned K-Swap Conversion Harness - EF Civic\/Crx","description":"\n\u003cp class=\"store_normal\"\u003eWe stepped into the wiring market for a reason. To release what we feel is the highest quality and easiest to install conversion harness available. We've used several of our competitor's harnesses and in short, we felt the need to make several improvements based on the flaws we encountered. Just like every other K-Tuned product, they don't leave our hands unless we feel that it is a top quality part that we would use on our own personal cars.\u003c\/p\u003e\n\u003cp class=\"store_normal\"\u003eA K-swap conversion harness is a must-have part for any K-series engine swap. The harness is required to join up the factory K-series engine harness to the factory dash harness of the swapped car. It is designed integrate the K-series ecu and all of the related electrical functions get them operating properly. Functions like the fuel pump, tach, speedo, starter signal, O2 sensors, etc.\u003c\/p\u003e\n\u003cp class=\"store_normal\"\u003eThe K-Tuned harness is 99% plug and play and takes very little time to install. The harness is constructed with quality mil-spec, oem colored wire and finished with a nice clean looking mil-spec nylon sleeving for protection. Our harnesses come complete with installation instructions. The end result is a very high quality conversion harness at the best possible price. Several applications are available so get yours to make sure your K-swap is wired up right!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003ePlease make sure to select your model. We need to know if your car was dual-point inject or multi-point injection. There is an adapter required for certain models. If you are unsure of your car feel free to contact us at us.\u003c\/p\u003e\n\u003cp\u003eSome modification may be required for EF8\/9 models.\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":29175360815203,"sku":"KTH-88-91","price":760.24,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/kth-88-91_1.jpg?v=1580787747"},{"product_id":"skunk2-4-bar-map-sensor-b-d-h-f-series","title":"Skunk2 4 Bar MAP Sensor - B\/D\/H\/F Series","description":"\u003cp\u003eSkunk2 is proud to offer a 4-Bar MAP Sensor for B, D, H, and F-series (F20B \u0026amp; SOHC and ’00-’05 S2000) engines.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSkunk2 MAP sensors are plug-in compatible and are direct replacements for Honda’s factory-issued MAP sensor.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecs\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\n@page { margin: 2cm }\n\t\tP { margin-bottom: 0cm }\n\t\tP.western { font-family: \"Arial\", serif; font-size: 10pt; so-language: en-US; font-weight: bold }\n\t\tP.cjk { font-family: \"Arial\"; font-size: 10pt; so-language: en-US; font-weight: bold }\n\t\tP.ctl { font-family: \"Arial\"; font-size: 10pt; so-language: ar-SA; font-weight: bold }\n--\u003e\u003c\/style\u003e\n\u003cp align=\"LEFT\" class=\"western\"\u003e\u003cspan face=\"Times New Roman, serif\" style=\"font-family: 'Times New Roman', serif;\"\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003e\u003cspan size=\"2\" style=\"font-size: small;\"\u003eScalar 838\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"LEFT\" class=\"western\"\u003e\u003cspan face=\"Times New Roman, serif\" style=\"font-family: 'Times New Roman', serif;\"\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003e\u003cspan size=\"2\" style=\"font-size: small;\"\u003eOffset 31\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"western\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp align=\"LEFT\" class=\"western\"\u003e\u003cspan face=\"Times New Roman, serif\" style=\"font-family: 'Times New Roman', serif;\"\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003e\u003cb\u003eVoltage to pressure (KPA) conversion\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"western\" lang=\"en-US\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"western\" lang=\"en-US\"\u003eP= pressure in KPA 4 bar = 400 KPA\u003c\/p\u003e\n\u003cp class=\"western\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"western\" lang=\"en-US\"\u003eVoltage out\/signal = 5 X (.002421 X P - .00842)\u003c\/p\u003e\n\u003cp class=\"western\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"western\" lang=\"en-US\"\u003eAtmosphere equals 1 bar or 100 KPA = 5 X (.002421 X 100 - .00842) = 1.168 volts @ 1 bar or 100 KPA\u003c\/p\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175391256675,"sku":"skk352-05-1510","price":253.98,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/b_series.jpg?v=1569190312"},{"product_id":"blox-racing-rear-camber-kit-ef-eg-ek-da-dc","title":"BLOX Racing Rear Camber Kit - EF\/EG\/EK\/DA\/DC","description":"\u003cp\u003eBLOX Racing adjustable rear camber kits are manufactured from forged alloy steel and AL7075. Each kit uses vulcanized rubber bushings and are powder coated from maximum durability.\u003c\/p\u003e\n\u003cp\u003eThe BLOX Racing adjustable rear camber kit is a must for enthusiasts that need to quickly and easily adjust their suspension's rear camber settings for high performance driving and racing situations where maximum tire contact and thread life is vital.\u003c\/p\u003e\n\u003cp\u003eThese are direct replacement units for the factory rear upper control arms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustment range: +\/- 5°\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eVEHICLE APPLICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e88-91 Civic\/CRX\u003c\/li\u003e\n\u003cli\u003e92-95 Civic\u003c\/li\u003e\n\u003cli\u003e92-97 Delsol\u003c\/li\u003e\n\u003cli\u003e96-00 Civic\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e90-93 Integra\u003c\/li\u003e\n\u003cli\u003e94-01 Integra\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BLOX Racing","offers":[{"title":"Default Title","offer_id":29175391584355,"sku":"BXSS-20101","price":357.02,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/rearcamber-500x500.jpg?v=1580875166"},{"product_id":"asr-24mm-swaybar-upgrade-kit","title":"ASR 24mm Swaybar Upgrade Kit","description":"\n\n\u003cp\u003eImprove your vehicles handling dynamics with the ASR swaybar kit. This is the perfect upgrade to bolt on to your existing ASR subframe brace. The machined billet aluminum brackets with polyurethane bushings ensures proper mounting and fitment to your ASR brace. This product was designed for longevity and performance under street and track driving conditions.*\u003c\/p\u003e\n\u003cp\u003eASR 24mm Swaybar (Street\/Track)\u003c\/p\u003e\n\u003cp\u003eThe ASR 24mm swaybar is the perfect bar for a those looking for a startup setup. It features a swaybar that is the same dimensions and look as a OEM swaybar but is significantly stiffer due to its increased diameter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOT SUITABLE FOR TYPE R MODELS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwaybar Rate Comparison\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOEM ITR 22 mm Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMeasured bar rate:\u003c\/p\u003e\n\u003cp\u003eP1 = 51 N\/mm (292 lbs\/in)\u003c\/p\u003e\n\u003cp\u003eBar weight: 3.78 kg (8.4 lbs)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOEM ITR 23mm Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMeasured  bar rate:\u003c\/p\u003e\n\u003cp\u003eP1 = 60 N\/mm (347 lbs\/in)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eASR Gray bar: 23.8mm (.937 in) Solid, 2 Position adjustable\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMeasured bar rate:\u003c\/p\u003e\n\u003cp\u003eP1 = (414lbs\/in)\u003cbr\u003e\nP2 = (507lbs\/in)\u003c\/p\u003e\n\u003cp\u003eRed bar weight: 4.4 kg (9.7 lbs)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eASR 24mm or 1\" Swaybar\u003c\/li\u003e\n\u003cli\u003eFitting Kit (comes with 1\" swaybar only)\u003c\/li\u003e\n\u003cli\u003eASR D-bracket bushings\u003c\/li\u003e\n\u003cli\u003eASR billet aluminum D-brackets\u003c\/li\u003e\n\u003cli\u003eEnergy Suspension grease\u003c\/li\u003e\n\u003cli\u003eThis kit does not come with ASR endlinks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ASR","offers":[{"title":"EF\/EG\/DA\/DC","offer_id":29175394074723,"sku":"EG-24S-01","price":494.58,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/24S1_grande_8db16711-6484-4f1f-bc99-ffdc117df2b9.jpg?v=1580875178"},{"product_id":"mpc-billet-rear-drop-lcas-ef-eg-da-dc","title":"MPC Billet Rear Drop LCA's - EF\/EG\/DA\/DC","description":"\n\u003cp\u003eAt MPC, we strive to provide our customers with innovative, high-quality products. Our goal has always been to exceed the industry standard, and we’ve done just that with our Billet Lower Drop Arms.\u003c\/p\u003e\n\u003cp\u003eOur Drop Arms not only serve as an upgrade from worn out factory components, they also lower the rear of your vehicle approximately 2’’. This allows your shock much more travel, eliminating bottoming out issues and prolonging the life of your shock.\u003c\/p\u003e\n\u003cp\u003eWe opted to use Energy Suspension bushings in our Drop Arms, for easy replacement if ever necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSafely and Professionally Lowers your Vehicle 2’’\u003c\/li\u003e\n\u003cli\u003eExtremely Strong \u0026amp; Lightweight\u003c\/li\u003e\n\u003cli\u003e6061-T6 Billet Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eUtilizes Energy Suspension Bushings\u003c\/li\u003e\n\u003cli\u003ePrecision CNC Machined and Tested\u003c\/li\u003e\n\u003cli\u003eSway Bar Compatible\u003c\/li\u003e\n\u003cli\u003eBuilt in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"951\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/YovvJZX0rkQ\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"MPC Motorsport","offers":[{"title":"Raw","offer_id":29175403708515,"sku":"MPC-DROPLCA-EF\/EG\/DA\/DC","price":642.77,"currency_code":"NZD","in_stock":true},{"title":"Black Powdercoat","offer_id":39813463048291,"sku":"MPC-DROPLCA-EF\/EG\/DA\/DC-BLK","price":561.62,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/fdaee3_4a50dbc715e74037903c19dc481588e7-mv2_d_1200_1200_s_2.jpg?v=1580787939"},{"product_id":"mpc-extended-tophats-pair-ef-eg-ek-da-dc","title":"MPC Extended Tophats (Pair) - EF\/EG\/EK\/DA\/DC","description":"\n\u003cp\u003eWhen it comes to suspension, almost everyone has read or heard the term ‘extended top hats.’ But what do they actually do?\u003c\/p\u003e\n\u003cp\u003eOn most Honda\/Acura chassis, the top of the strut is bolted directly to a factory ‘top hat’. This OEM piece allows the whole damper assembly to be mounted through the shock tower. When using our extended top hats, the top mounting point of the shock itself is raised up further through the shock tower, while still the entire damper still mounts in the factory position.\u003c\/p\u003e\n\u003cp\u003eContrary to what some have heard, \u003cstrong\u003ethis does NOT lower your car any more than the OEM top hat does\u003c\/strong\u003e. This is because the distance from the bottom of your shock tower to the lower perch of your shock (where your spring rests) is still exactly the same.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt DOES, however, give you much more shock travel.\u003c\/strong\u003e This eliminates bottoming out issues and prolongs the life of your shock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease Shock Travel\u003c\/li\u003e\n\u003cli\u003eAvoid Bottoming Out\u003c\/li\u003e\n\u003cli\u003eExtend Shock Life\u003c\/li\u003e\n\u003cli\u003e6061 Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eCNC Machined\u003c\/li\u003e\n\u003cli\u003eHigh Grade, Rust Resistant Hardware\u003c\/li\u003e\n\u003cli\u003eSold in Pairs\u003c\/li\u003e\n\u003cli\u003eBuilt in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"951\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/YovvJZX0rkQ\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"MPC Motorsport","offers":[{"title":"Black","offer_id":29175404724323,"sku":"MPC-TOPHATS-BLK","price":281.72,"currency_code":"NZD","in_stock":true},{"title":"Gold","offer_id":29175404822627,"sku":"MPC-TOPHATS-GLD","price":281.72,"currency_code":"NZD","in_stock":true},{"title":"Polished","offer_id":29175404855395,"sku":"MPC-TOPHATS-POL","price":281.72,"currency_code":"NZD","in_stock":true},{"title":"Purple","offer_id":29175404757091,"sku":"MPC-TOPHATS-PUR","price":281.72,"currency_code":"NZD","in_stock":true},{"title":"Red","offer_id":29175404789859,"sku":"MPC-TOPHATS-RED","price":281.72,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/fdaee3_9f86063c2c0842e09bca3bd5c993f73e-mv2_d_1200_1200_s_2.png?v=1580787942"},{"product_id":"simota-3-alloy-intake-pipe-kit-ef","title":"Simota 3\" Alloy Intake Pipe Kit - EF","description":"\u003cp\u003eSimota are the original Honda intake pipe kit and pod filter manufacturer.  You’ll find their products on millions of cars worldwide – especially Hondas!\u003c\/p\u003e\n\u003cp\u003eGain power and most importantly VTAXXXXX SOUNDS with these intake pipe kits.\u003c\/p\u003e\n\u003cp\u003eSmoother internal flow and of course, the benefit of a high flow pod filter combine to increase power and torque throughout the rev range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll Simota intake pipe kits include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3″ polished alloy pipe\u003c\/li\u003e\n\u003cli\u003e3-2.5″ pipe to throttle body joiner\u003c\/li\u003e\n\u003cli\u003e3″ hose clamp\u003c\/li\u003e\n\u003cli\u003eAir filter mounting clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee related products for Simota and K\u0026amp;N air filter options.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e If you have a 70mm or larger throttle body you'll need a 3\"-3\" joiner from pipe to tb. Also won't fit carby Shuttles.\u003c\/p\u003e","brand":"Simota","offers":[{"title":"Default Title","offer_id":29175416193123,"sku":"NEB02-99110","price":152.35,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/IMG_7630-1.jpg?v=1580875423"},{"product_id":"speed-science-heavy-duty-front-tow-hook-kit","title":"Speed Science Heavy Duty Front Tow Hook Kit - EG\/DC","description":"\n\u003cp\u003eIntroducing another addition to our line of locally designed and manufactured products.\u003c\/p\u003e\n\u003cp\u003eThese tow hooks are designed with the circuit racer in mind.  They're built tough and meet the standards as specificed by MSNZ.\u003c\/p\u003e\n\u003cp\u003eTested specifically on Dc2 and EG 2\/3dr models - the length of the hooks mean they sit within the outer radius of the bumper profile.  This is crucial for meeting MANZ regulations.\u003c\/p\u003e\n\u003cp\u003eAny car that has a measurement from the front face of the radiator support to the front edge of the bumper radius greater than 150mm can use these tow hooks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5mm Steel Construction\u003c\/li\u003e\n\u003cli\u003eLaser CUt \u0026amp; Precision Folded\u003c\/li\u003e\n\u003cli\u003eDoubled Sided Welding\u003c\/li\u003e\n\u003cli\u003eRed\/Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTow Hook Kit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Heavy Duty Tow Hook\u003c\/li\u003e\n\u003cli\u003e1 x Backing Plate\u003c\/li\u003e\n\u003cli\u003e2 x M10 Stainless Bolts\u003c\/li\u003e\n\u003cli\u003e2 x M10 Nylocs\u003c\/li\u003e\n\u003cli\u003e4 x M10 Washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Drilling through the radiator support panel is required to install this tow hook.  Whilst not required, we recommend installing crush tubes.\u003c\/p\u003e","brand":"Speed Science","offers":[{"title":"231mm (DC2 \u0026 Other Long Nose Front)","offer_id":29175423205475,"sku":"SS-FRONTTOW-DC2","price":149.0,"currency_code":"NZD","in_stock":true},{"title":"150mm (EF\/EG\/EK Short Nose Front)","offer_id":29175423238243,"sku":"SS-FRONTTOW-EG","price":149.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/IMG_7698.jpg?v=1580875522"},{"product_id":"blox-racing-rear-toe-arms-ef-da-eg-ek-dc","title":"BLOX Racing Rear Toe Arms - EF\/DA\/EG\/EK\/DC","description":"\u003cp\u003e\u003cspan\u003eBLOX Racing adjustable rear toe kits are manufactured from forged alloy steel and AL7075. Each kit uses vulcanized rubber bushings and are powder coated from maximum durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLOX Racing adjustable rear toe kits are designed to allow the suspension tuner to quickly adjust the toe settings.\u003c\/p\u003e\n\u003cp\u003eToe, including camber, are affected after the vehicle's suspension is lowered or when using different offset wheels and tires. Proper rear toe alignment is necessary in order to reduce tire wear, increase tire contact patch and improve overall handling.\u003c\/p\u003e\n\u003cp\u003eThese are direct replacement units for the factory rear toe arms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustment range: +\/- 4°\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eVEHICLE APPLICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e92-95 Civic\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e92-97 Delsol\u003c\/li\u003e\n\u003cli\u003e96-00 Civic\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e90-93 Integra\u003c\/li\u003e\n\u003cli\u003e94-01 Integra\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BLOX Racing","offers":[{"title":"Default Title","offer_id":29175428481123,"sku":"BXSS-20102","price":333.98,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/reartoekit-1-500x500-500x500.jpg?v=1580788183"},{"product_id":"skunk2-alpha-radiator-ef-civic-crx-half-size","title":"Skunk2 Alpha Radiator - EF Civic\/Crx Half Size","description":"\n\u003cp\u003eSkunk2's all-aluminium, half-size Alpha Series Radiator for the 88-91 Civic\/CRX is a direct-fit upgrade designed to dramatically increase both cooling efficiency and engine performance. Alpha Series Radiators are manufactured from lightweight and durable aluminium, feature 100-percent brazed cores, and include polished end tanks with Skunk2's signature Alpha logo embossed along each side. Each Alpha Series Radiator features a dual-core design, high-efficiency fins for maximum cooling capabilities, and includes a genuine Skunk2 Radiator Cap for maximum performance and a premium appearance. Each Alpha Series Radiator also includes provisions for the OEM cooling fan and larger \u003cstrong\u003e1.25-inch inlets and outlets (B\/H\/K Series)\u003c\/strong\u003e, which makes it ideal for most engine swaps that utilize larger radiator hoses.\u003c\/p\u003e\n\u003cp\u003eSkunk2's commitment to producing high-quality components means that each Alpha Series Radiator meets or exceeds original equipment manufacturer standards, that each radiator may be installed without modification to the vehicle, and is compatible with OEM hoses, cooling fans, and shrouds. (Note: Some engine swap applications may require custom radiator hoses and\/or cooling fans.)\u003c\/p\u003e\n\u003cp\u003eSkunk2's Alpha Series Radiators are the perfect addition to any high-performance vehicle and are designed for the street, the track, or even OEM replacement purposes. Alpha Series Radiators are built to withstand harsh elements as well as against years of under-hood heat cycling. Each Alpha Series Radiator adheres to strict quality control standards and careful packaging, resulting in tubes and fins capable of optimal flow and efficient heat transfer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual-core design.\u003c\/li\u003e\n\u003cli\u003eIncludes Skunk2 Radiator Cap.\u003c\/li\u003e\n\u003cli\u003eFeatures 1.25-inch inlet and outlet.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Skunk2","offers":[{"title":"Default Title","offer_id":29175429103715,"sku":"skk349-05-1550","price":485.6,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/dsc_0002_2_18_3.jpg?v=1569190315"},{"product_id":"hard-race-reverse-tie-rod-end-ef-eg-ek-dc","title":"Hardrace Reverse Tie Rod Ends - EF\/EG\/EK\/DC","description":"\n\u003cp\u003e\u003cstrong\u003e*Sold As A Kit*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRoll centre tie rod end made with high-quality alloy steel. These tie rod ends are designed to have maximum accuracy, which enables them to sustain extensive load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReversed design for optimum steering angle on lowered vehicles (300mm centre of wheel to guard or lower)\u003c\/li\u003e\n\u003cli\u003eCorrect lowered geometry\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on with OEM components\u003c\/li\u003e\n\u003cli\u003eProvide better feedback to the driver\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":29175431364707,"sku":"hr6565","price":361.28,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/20144515304915I30G49VR.jpg?v=1580875772"},{"product_id":"hard-race-rear-lca-bushes-ef-eg-dc","title":"Hardrace Rear LCA Bushes - EF\/EG\/DC","description":"\n\u003cp\u003e\u003cstrong\u003e*Sold As A Kit*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHard Race suspension bushes are hardened rubber bushings made with high strength, anti-crack rubber material. Enjoy improved steering response and driving suspension feel.\u003c\/p\u003e\n\u003cp\u003eDesigned to suit OEM \"eye type\" LCA.\u003c\/p\u003e\n\u003cp\u003e150% increase in oem rubber stiffness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReduces vibration\u003c\/li\u003e\n\u003cli\u003eProvides stability\u003c\/li\u003e\n\u003cli\u003eIncrease steering response\u003c\/li\u003e\n\u003cli\u003eOEM direct replacement\u003c\/li\u003e\n\u003cli\u003eRegular greasing not required\u003c\/li\u003e\n\u003cli\u003eNo noise or squeaks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":29175432183907,"sku":"hr6257","price":125.51,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/201451910371910O37Z19KL.jpg?v=1582171521"},{"product_id":"hard-race-front-sway-bar-end-links-ef-eg-excl-ef8-9","title":"Hardrace Front Sway Bar End Links - EF\/EG excl EF8\/9","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003e*Sold As A Set*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHard Race sway bar d bush and end link bushes are specially developed thermoplastic bushings made with high strength, anti-crack rubber material. Enjoy improved steering response and driving suspension feel.\u003c\/p\u003e\n\u003cp\u003e150% increase in eom rubber stiffness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReduces vibration\u003c\/li\u003e\n\u003cli\u003eProvides stability\u003c\/li\u003e\n\u003cli\u003eIncrease steering response\u003c\/li\u003e\n\u003cli\u003eOEM direct replacement\u003c\/li\u003e\n\u003cli\u003eRegular greasing not required\u003c\/li\u003e\n\u003cli\u003eNo noise or squeaks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":29175433101411,"sku":"hr6136","price":114.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/resized_389_3_1831_13_633_1_168.jpg?v=1580875795"},{"product_id":"hard-race-front-tension-radius-rod-bushes-ef-civic-crx","title":"Hardrace Front Tension\/Radius Rod Bushes - EF Civic\/Crx","description":"\n\u003cp\u003eHard Race suspension bushes are hardened rubber bushings made with high strength, anti-crack rubber material. Enjoy improved steering response and driving suspension feel.\u003c\/p\u003e\n\u003cp\u003e150% increase in oem rubber stiffness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReduces vibration\u003c\/li\u003e\n\u003cli\u003eProvides stability\u003c\/li\u003e\n\u003cli\u003eIncrease steering response\u003c\/li\u003e\n\u003cli\u003eOEM direct replacement\u003c\/li\u003e\n\u003cli\u003eRegular greasing not required\u003c\/li\u003e\n\u003cli\u003eNo noise or squeaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Will not fit EF8\/EF9 or any DA chassis\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":29175433134179,"sku":"hr6799","price":83.28,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/201411610512110F51M21LS.jpg?v=1580875797"},{"product_id":"hard-race-front-lca-bushes-ef-da","title":"Hardrace Front LCA Bushes - EF\/DA","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003e*Sold As A Set*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHard Race suspension bushes are hardened rubber bushings made with high strength, anti-crack rubber material. Enjoy improved steering response and driving suspension feel.\u003c\/p\u003e\n\u003cp\u003e150% increase in oem rubber stiffness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReduces vibration\u003c\/li\u003e\n\u003cli\u003eProvides stability\u003c\/li\u003e\n\u003cli\u003eIncrease steering response\u003c\/li\u003e\n\u003cli\u003eOEM direct replacement\u003c\/li\u003e\n\u003cli\u003eRegular greasing not required\u003c\/li\u003e\n\u003cli\u003eNo noise or squeaks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":29175433396323,"sku":"hr6798","price":167.74,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/resized_389_3_1831_13_633_1_488.jpg?v=1580875803"},{"product_id":"evolution-industries-h2b-swap-kit-ef","title":"Evolution Industries H2B Swap Kit - EF","description":"\n\u003cp\u003e**WILL NOT FIT EF8\/9**\u003c\/p\u003e\n\u003cp\u003eForget the rest just get the best – Evolution Industries make the best H2B kit hands down.\u003c\/p\u003e\n\u003cp\u003eThe Evolution Industries H2B Conversion kit is developed, engineered and manufactured in the U.S.A. Unlike the competition, they built a rigorously tested, plug n’ play system. The Evolution kit comes with signature zinc oxide plated adapter plate, Evolution Industries SFI approved aluminum flywheel with serrated heat treated friction plate, custom pillow block mount for half shaft, 8.8 grade bolts, solid dowels, and slave cylinder spacer.\u003c\/p\u003e\n\u003cp\u003eNo kit on the planet even comes close!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Evolution kit Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision machined\u003c\/li\u003e\n\u003cli\u003eComplete, with stage options (with or without EG, EF or EK chassis mounts)\u003c\/li\u003e\n\u003cli\u003eCustom SFI approved flywheel (no dangerous spacers)\u003c\/li\u003e\n\u003cli\u003eFlywheel also incorporates timing marks\u003c\/li\u003e\n\u003cli\u003eField and race-tested\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eH22\/H23\/F22\/F23 power without the quirky, long ratio’d H-based transmission\u003c\/li\u003e\n\u003cli\u003eImproved power-weight ratio\u003c\/li\u003e\n\u003cli\u003eImproved aftermarket gearbox support\u003c\/li\u003e\n\u003cli\u003eDesigned to withstand the rigors of racing and street duty\u003c\/li\u003e\n\u003cli\u003eThe only SFI approved kit in the industry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitting Notes:\u003c\/strong\u003e\u003cbr\u003e Hood Modification, Aftermarket Crossmember, \u0026amp; Alternator Modifications Required\u003c\/p\u003e","brand":"Evolution Industries","offers":[{"title":"Default Title","offer_id":29175437459555,"sku":"28708","price":3947.38,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/l_ev-27708.jpg?v=1580875886"},{"product_id":"mpc-transmission-hardware-kit-d-b-h-f-k-series","title":"MPC Transmission Hardware Kit - D\/B\/H\/F\/K Series","description":"\n\u003cp\u003eHundred Proof Hardware™ by MPC\u003c\/p\u003e\n\u003cp\u003eStainless Steel Transmission Hardware Kit\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGet rid of those old, corroded factory bolts!\u003c\/li\u003e\n\u003cli\u003eMPC Kits are sealed and will not corrode like other kits on the market\u003c\/li\u003e\n\u003cli\u003ePrecision CNC Machined Billet Washers\u003c\/li\u003e\n\u003cli\u003eHigh Strength Stainless Steel Bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct info:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur 50pc+ Kit Includes Stainless Bolts \u0026amp; Hundred Proof Billet Washers to Replace:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngine to Transmission\u003c\/li\u003e\n\u003cli\u003eStarter\u003c\/li\u003e\n\u003cli\u003eTransmission Case\u003c\/li\u003e\n\u003cli\u003eSlave Cylinder\u003c\/li\u003e\n\u003cli\u003eVSS\u003c\/li\u003e\n\u003cli\u003eEngine Hoist Bracket\u003c\/li\u003e\n\u003cli\u003eTrans Ground Wire\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFitment notes:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eCable Transmission Kits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes Bolts for Shift Lever Weight \u0026amp; Shift Cable Bracket\u003c\/li\u003e\n\u003cli\u003eSlave Cylinder Not Applicable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eK Series Transmission Kits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes outer Starter Bolt only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"951\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/YovvJZX0rkQ\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"MPC Motorsport","offers":[{"title":"Black \/ B Series","offer_id":29175477928035,"sku":"MPC-100P-BCBLTRANSKI-BKT","price":340.89,"currency_code":"NZD","in_stock":true},{"title":"Gold \/ B Series","offer_id":29175477993571,"sku":"MPC-100P-BCBLTRANSKIT-GD","price":340.89,"currency_code":"NZD","in_stock":true},{"title":"Purple \/ B Series","offer_id":29175477960803,"sku":"MPC-100P-BCBLTRANSKIT-PR","price":340.89,"currency_code":"NZD","in_stock":true},{"title":"Red \/ B Series","offer_id":29175478026339,"sku":"MPC-100P-BCBLTRANSKIT-RD","price":340.89,"currency_code":"NZD","in_stock":true},{"title":"Silver \/ B Series","offer_id":29175478059107,"sku":"MPC-100P-BCBLTRANSKIT-SL","price":340.89,"currency_code":"NZD","in_stock":true},{"title":"Black \/ B Series","offer_id":29175478091875,"sku":"MPC-100P-BHYTRANSKIT-BK","price":324.3,"currency_code":"NZD","in_stock":true},{"title":"Gold \/ B Series","offer_id":29175478157411,"sku":"MPC-100P-BHYTRANSKIT-GD","price":340.89,"currency_code":"NZD","in_stock":true},{"title":"Purple \/ B Series","offer_id":29175478124643,"sku":"MPC-100P-BHYTRANSKIT-PR","price":340.89,"currency_code":"NZD","in_stock":true},{"title":"Red \/ B Series","offer_id":29175478190179,"sku":"MPC-100P-BHYTRANSKIT-RD","price":340.89,"currency_code":"NZD","in_stock":true},{"title":"Silver \/ B Series","offer_id":29175478222947,"sku":"MPC-100P-BHYTRANSKIT-SL","price":340.89,"currency_code":"NZD","in_stock":true},{"title":"Black \/ D Series","offer_id":29175477600355,"sku":"MPC-100P-DCBLTRANSKIT-BK","price":340.89,"currency_code":"NZD","in_stock":true},{"title":"Gold \/ D Series","offer_id":29175477665891,"sku":"MPC-100P-DCBLTRANSKIT-GD","price":340.89,"currency_code":"NZD","in_stock":true},{"title":"Purple \/ D Series","offer_id":29175477633123,"sku":"MPC-100P-DCBLTRANSKIT-PR","price":340.89,"currency_code":"NZD","in_stock":true},{"title":"Red \/ D Series","offer_id":29175477698659,"sku":"MPC-100P-DCBLTRANSKIT-RD","price":340.89,"currency_code":"NZD","in_stock":true},{"title":"Silver \/ D Series","offer_id":29175477731427,"sku":"MPC-100P-DCBLTRANSKIT-SL","price":209.27,"currency_code":"NZD","in_stock":true},{"title":"Purple \/ D Series","offer_id":29175477796963,"sku":"MPC-100P-DHYTRANSKIT","price":340.89,"currency_code":"NZD","in_stock":true},{"title":"Black \/ D Series","offer_id":29175477764195,"sku":"MPC-100P-DHYTRANSKIT-BK","price":340.89,"currency_code":"NZD","in_stock":true},{"title":"Gold \/ D Series","offer_id":29175477829731,"sku":"MPC-100P-DHYTRANSKIT-GD","price":340.89,"currency_code":"NZD","in_stock":true},{"title":"Red \/ D Series","offer_id":29175477862499,"sku":"MPC-100P-DHYTRANSKIT-RD","price":340.89,"currency_code":"NZD","in_stock":true},{"title":"Silver \/ D Series","offer_id":29175477895267,"sku":"MPC-100P-DHYTRANSKIT-SL","price":340.89,"currency_code":"NZD","in_stock":true},{"title":"Black \/ K Series","offer_id":29175477436515,"sku":"MPC-100P-KTRANSKIT-BK","price":269.2,"currency_code":"NZD","in_stock":true},{"title":"Gold \/ K Series","offer_id":29175477502051,"sku":"MPC-100P-KTRANSKIT-GD","price":340.89,"currency_code":"NZD","in_stock":true},{"title":"Purple \/ K Series","offer_id":29175477469283,"sku":"MPC-100P-KTRANSKIT-PR","price":269.2,"currency_code":"NZD","in_stock":true},{"title":"Red \/ K Series","offer_id":29175477534819,"sku":"MPC-100P-KTRANSKIT-PR-RD","price":340.89,"currency_code":"NZD","in_stock":true},{"title":"Silver \/ K Series","offer_id":29175477567587,"sku":"MPC-100P-KTRANSKIT-SL","price":340.89,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/IMG_8197.jpg?v=1600051943"},{"product_id":"epman-short-shifter-dual-bend","title":"EPMAN Dual Bend Short Shifter - DA\/DC","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cb\u003eEPMAN Dual Bend Short Shifter - DA\/DC\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eThe Short Shifter is made with high strength billet steel and nickel plated for ultra-low friction and corrosion resistance. The throw is reduced up to 40%, and shift knob height is reduced up to 3 inches depending on the model. These shifters provide a more precise shift and allow for quicker shifting without drastically changing the overall driving experience. They have been designed specifically for the more aggressive tuner who demands the most extreme shifter in terms of both looks and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003c\/b\u003e\u003cb\u003eMaterial:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCoated with High-Quality Polished T6061 Billet Aluminum for Enhancing Strength and Durability\u003c\/li\u003e\n\u003cli\u003eCNC Machined High Strength Durable Material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eColor: \u003c\/b\u003eRed, Chrome, Black, Blue\u003c\/p\u003e","brand":"EPMAN","offers":[{"title":"Black","offer_id":29175485399139,"sku":"EP-PDG02HD-BLK","price":34.95,"currency_code":"NZD","in_stock":true},{"title":"Blue","offer_id":29175485366371,"sku":"EP-PDG02HD-BLU","price":34.95,"currency_code":"NZD","in_stock":true},{"title":"Red","offer_id":29175485333603,"sku":"EP-PDG02HD-RED","price":34.95,"currency_code":"NZD","in_stock":true},{"title":"Silver","offer_id":29175485431907,"sku":"EP-PDG02HD-SIL","price":34.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Short-Shifter-For-Acura-Integra-90-91-92-93-94-01-EP-PDG02HD.jpg_640x640_9243f53f-64a3-42b2-9fea-6695e104ac48.jpg?v=1580876263"},{"product_id":"stoptech-power-slot-cryo-stop-rear-rotors-239mm-ef-eg-ek-da-dc","title":"StopTech Power Slot CRYO-STOP Rear Rotors - 239mm - EF\/EG\/EK\/DA\/DC","description":"\u003cp\u003eWhen you need something tougher than a StopTech SportStop Slotted rotor, but you're not quite ready for a big brake kit, try our new StopTech SportStop Slotted rotors. StopTech has teamed up with Frozen Rotors to offer cryogenic treatment on the StopTech rotor line.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003eDeep cryogenic treatment is a one-time process that permanently improves the performance and service life of metals from brake rotors and engine parts, to machine tools and gear sets. Using a proprietary computer-controlled process, the metal is cooled gradually to -300°F and then slowly returned to room temperature and heat-cycled as the final step. Although not apparent to the naked eye, the improvements to the rotor are significant. The cryogenic treatment process redistributes residual stress in the rotor giving it an extra level of protection against warping.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eJust as standard StopTech SportStop Slotted Rotors, Cryo Rotors start with the following features:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003ePower Alloy castings (on select applications)\u003c\/li\u003e\n\u003cli\u003eEngineered Performance Rotor\u003c\/li\u003e\n\u003cli\u003eSuperior resistance to cracking due to thermal stress\u003c\/li\u003e\n\u003cli\u003eIncreased molybdenum (higher carbon)content that extends reliability, service life and helps reduce NVH “noise” issues\u003c\/li\u003e\n\u003cli\u003eRotor material is a direct descendant of the patented AeroRotor from StopTech\u003c\/li\u003e\n\u003cli\u003eIntroducing directional curve vane design (on select applications)\u003c\/li\u003e\n\u003cli\u003eImproved vane design or OE equivalent on all rotors\u003c\/li\u003e\n\u003cli\u003eCenter split castings\u003c\/li\u003e\n\u003cli\u003eNew short slot design runs perpendicular to the vane to preserve rotor strength.\u003c\/li\u003e\n\u003cli\u003eDirect OE Replacement\u003c\/li\u003e\n\u003cli\u003eImproved wet weather response\u003c\/li\u003e\n\u003cli\u003eIncreased initial “bite”\u003c\/li\u003e\n\u003cli\u003eDouble disc ground for a consistent friction surface and Improved pad bed-in\u003c\/li\u003e\n\u003cli\u003eMill balanced\u003c\/li\u003e\n\u003cli\u003eBlack E-Coated non-friction surfaces on “Power Alloy” rotors\u003c\/li\u003e\n\u003cli\u003eEnhances open wheel appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Will not fit Dc2 Type r\u003c\/p\u003e\n\u003c\/div\u003e","brand":"StopTech","offers":[{"title":"Left Only","offer_id":39662054703203,"sku":"sto126.40017CSL","price":419.85,"currency_code":"NZD","in_stock":true},{"title":"Left \u0026 Right","offer_id":29175493001315,"sku":"sto126.40017CSL+sto126.40017CSR","price":839.7,"currency_code":"NZD","in_stock":true},{"title":"Right Only","offer_id":39662054735971,"sku":"sto126.40017CSR","price":419.85,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/sport-slotted-rotor_1_321adea9-11ad-43d8-8df2-a2d7cb6bd7be.jpg?v=1580788508"},{"product_id":"pci-rear-trailing-arm-bushes-80mm","title":"PCI V4 Rear Trailing Arm Bushes - EF\/EG\/EK\/DA\/DC","description":"\u003cp\u003eV4 Rear trailing arm spherical bearing kit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eFEATURES:\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCNC MACHINED 7075 ALUMINUM HOUSINGS\u003c\/li\u003e\n\u003cli\u003eCNC MACHINED 7075 ALUMINUM SHAFTS\u003c\/li\u003e\n\u003cli\u003eREPLACEABLE PRECISION GROUND BRONZE SHAFT BEARING\u003c\/li\u003e\n\u003cli\u003eHIGH QUALITY SPHERICAL BEARINGS\u003c\/li\u003e\n\u003cli\u003eOFFSET HOUSING\u003c\/li\u003e\n\u003cli\u003eANODIZED HOUSINGS AND SHAFTS\u003c\/li\u003e\n\u003cli\u003eZINC PLATED 10MM GRADE 10.9 HARDWARE\u003c\/li\u003e\n\u003cli\u003eLASER ETCHED LOGO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003e\u003cu\u003eBENEFITS:\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIMPROVES BRAKING RESPONSE\u003c\/li\u003e\n\u003cli\u003eOFFSET HOUSING CORRECTS TOW LINK ANGLE IMPROVING TOW CURVE ON LOWERED CARS\u003c\/li\u003e\n\u003cli\u003eALLOWS FOR SOFTER REAR SPRINGS DUE TO IMPROVED TOE CURVES\u003c\/li\u003e\n\u003cli\u003eELIMINATES UNWANTED SUSPENSION DEFLECTION\u003c\/li\u003e\n\u003cli\u003eLOW COST FULLY REBUILDABLE\u003c\/li\u003e\n\u003cli\u003eLONG LASTING MAINTENANCE FREE\u003c\/li\u003e\n\u003cli\u003eWITHSTANDS BAD WEATHER AND DIRTY ENVIRONMENTS\u003c\/li\u003e\n\u003cli\u003eCORROSION RESISTANT ZINC PLATED HARDWARE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDRILLING REQUIRED FOR INSTALLATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWORKS WITH DA 89-93 INTEGRA TRAILING ARMS USING THE SUPPLIED DRILLING TEMPLATE. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Pro Car Innovations","offers":[{"title":"Default Title","offer_id":29175497588835,"sku":"SB-TA-HONDA","price":566.15,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/SB-TA-HONDA-V4-1.jpg?v=1601611386"},{"product_id":"speedfactory-ecu-conversion-harnesses","title":"SpeedFactory ECU Conversion Harnesses","description":"\u003cp\u003eThe use of an OBD-1 (92-95) ECU is needed for proper tuning of your high-performance engine. The SpeedFactory Racing ECU Conversion Harnesses \u003cspan class=\"GramE\"\u003eallows\u003c\/span\u003e you to use an OBD-1 Honda\/Acura M\/T ECU in an OBD-0, OBD2-A or OBD2-B vehicle.\u003c\/p\u003e\n\u003cp\u003eWe designed our harnesses to be superior to other versions available on the market by using original equipment style ECU pin connections on all plugs, lengthening the harness leads to 7\" and by using durable automotive grade wire that exceeds OEM specifications.\u003c\/p\u003e\n\u003cp\u003eInstallation is simple and no cutting or soldering is necessary. Plugin one side to your OBD-1 ECU and the other side into your factory engine harness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSF-01-040 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe SpeedFactory Racing Honda OBD1 (Vehicle) to OBD2A (ECU) REVERSE Conversion Harness allows you to use any OBD2A Honda\/Acura M\/T ECU in an OBD1 vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor OBD-0 chassis there are additional parts required to complete your OBD-0 to OBD-1 conversion when using our harness.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAdditional Parts List:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOBD-1 distributor\u003c\/li\u003e\n\u003cli\u003eOBD-1 4-wire Oxygen Sensor\u003c\/li\u003e\n\u003cli\u003eOBD-1  Honda ECU\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOW SELLING - the rare and usually ultra-expensive OBD1-OBD2a harness for those wanting to run an ITR ECU in their OBD1 eg\/dc etc\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SpeedFactory","offers":[{"title":"OBD1-OBD2A","offer_id":29175537303651,"sku":"SF-01-040","price":252.41,"currency_code":"NZD","in_stock":true},{"title":"OBD2A-OBD1","offer_id":29175537205347,"sku":"SF-01-041","price":187.62,"currency_code":"NZD","in_stock":true},{"title":"OBD2B-OBD1","offer_id":42846591189091,"sku":"SF-01-042","price":187.62,"currency_code":"NZD","in_stock":true},{"title":"OBDO-OBD1","offer_id":42846591254627,"sku":"SF-01-043","price":187.62,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/obd2a-obd1.jpg?v=1569190326"},{"product_id":"hasport-chromoly-k-swap-axels-ef-eg-ek-dc","title":"Hasport Chromoly K-Swap Axels - EF\/EG\/EK\/DC","description":"\u003cp\u003e\u003cstrong\u003ePlease contact us first to check availability with Hasport.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHigh-Performance Axels suitable for K-Swap applications in EG\/EK\/DC\u003c\/p\u003e\n\u003cp\u003eHasport Axles are made in the USA with 100% brand new materials. They now feature a stronger chromoly center shaft for added strength and are rated for approximately 250 horsepower. Naturally, they have been designed to fit perfectly with Hasport Mount kits.\u003c\/p\u003e\n\u003cp\u003eHasport Axles are recommended for street use only with street tires and are covered by a 12-month limited warranty. Please note that we do not recommend using these axles for drag racing with slicks\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhilst labeled an entry level axel, we have customers using in both circuit and drag racing applications with acceptable longevity.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e In circuit applications, we recommend Redline high temp CV grease is used with all axels, both OEM and aftermarket.\u003c\/p\u003e","brand":"Hasport","offers":[{"title":"EF Civic\/Crx","offer_id":29175558144099,"sku":"HP-EFKAX","price":1314.87,"currency_code":"NZD","in_stock":true},{"title":"EG\/EK\/DC - 32mm","offer_id":29175558176867,"sku":"HP-EGKAX","price":1314.87,"currency_code":"NZD","in_stock":true},{"title":"EG\/EK\/DC - 36mm","offer_id":29175558209635,"sku":"HP-EGKAX-36","price":1314.87,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/rsz_hasportk-swapaxles_3.jpg?v=1580877312"},{"product_id":"hasport-chromoly-axels-b-series-hydro","title":"Hasport Chromoly Axles - B Series Hydro","description":"\u003cp\u003e\u003cstrong\u003ePlease contact us first to check availability with Hasport.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHigh-Performance Axles suitable for b series hydro transmissions in EG\/EK\/DC \u0026amp; EF!\u003c\/p\u003e\n\u003cp\u003eHasport Axles are made in the USA with 100% brand new materials. They now feature a stronger chromoly centre shaft for added strength and are rated for approximately 250 horsepower. Naturally, they have been designed to fit perfectly with Hasport Mount kits.\u003c\/p\u003e\n\u003cp\u003eHasport Axles are recommended for street use only with street tires and are covered by a 12-month limited warranty. Please note that we do not recommend using these axles for drag racing with slicks\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhilst labeled an entry-level axel, we have customers using in both circuit and drag racing applications with acceptable longevity.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e In circuit applications, we recommend Redline high temp CV grease is used with all axels, both OEM and aftermarket.\u003c\/p\u003e","brand":"Hasport","offers":[{"title":"EF - Cable or Hydro Trans (using hydro intermediate shaft) \/ 32mm","offer_id":29175558242403,"sku":"HP-EFBAX-HY","price":1314.87,"currency_code":"NZD","in_stock":true},{"title":"EG\/EK\/DC \/ 32mm","offer_id":29175558275171,"sku":"HP-EGBAX","price":1314.87,"currency_code":"NZD","in_stock":true},{"title":"EG\/EK\/DC \/ 36mm","offer_id":29175558307939,"sku":"HP-EGBAX-36","price":1314.87,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/rsz_hasportk-swapaxles_3_f11e99fd-d110-4fac-8322-bdf10e29bc03.jpg?v=1580877320"}],"url":"https:\/\/www.speedscience.co.nz\/collections\/crx-ef-non-vtec.oembed?page=3","provider":"Speed Science","version":"1.0","type":"link"}